• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Pricey cables

Status
Not open for further replies.
I'm feeling a bit like Nostradamus this morning. Shall I prophesize how this one ends? Lol.
Quite easily.

Since one model of one "small custom designer" had no apparent effect with one component in his system, the only reasonable conclusion therefore is that no cables of any type will ever have any effect on any other component in anyone else's system. :)
 
It's playing out exactly as expected.

(In no particular order.)

No it doesn't...

Yes it does...

Depends...

I know what I hear...

You're dreaming...

And so forth. LOL.
 
If nothing else, this should eliminate most of the carte blanche generalization, "your system is not resolving enough."

I now am fairly convinced that the single ended cables in my system could be used in most recording studios, & yes I'm aware of the raison d'etre for balanced ICs in certain circumstances.
 
My father is a Ph.D APS member who did signal processing R&D for the US military for 38 years. He's an expert in electrical conductivity. He agrees with the pro audio engineers in his circle that boutique power cable is complete horses--t. The people who sell it don't know physics, and are actually con artists.

If the guys selling boutique power cable had to stand up to formal peer review, they'd get massacred.
 
My father is a Ph.D APS member who did signal processing R&D for the US military for 38 years. He's an expert in electrical conductivity. He agrees with the pro audio engineers in his circle that boutique power cable is complete horses--t. The people who sell it don't know physics, and are actually con artists.

If the guys selling boutique power cable had to stand up to formal peer review, they'd get massacred.

Your father is both right and wrong on this, but so are most of the cable-manufacturers too. It`s mostly a hype like all this mumbo-jumbo about hyper expensive audiocables. Most audiocables are rather mediocre, even the most expensive ones. They do colorize the sound though, and in different ways, leaving pepole to prefer this or that. Some are better though, but it has little to do with price or "science".

Powercables is a bit moore important than some might think, the last meter(s) are the most important piece for a powersupplys performance, the blood-veins for let`s say a power amp. A crappy (stranded) cable here will be a restriction, just like some tiny speakercables will restrict dynamics too. "Unobtainium plugs" and so are pure bs though, but a good mechanical connection is important, allways.

Did a lot of research on this back in the late 80`s-early 90`s and I came to stumble upon some simple facts, like how to make absolutely inaudible cables*. Most salesmen off course hated this, but I`ve seen grown, divorced hyper-audiophiles cry from joy when they heard their system open up like they`ve dreamed of, they "got their hearing back.."

Enough for now

* simple diy
 
There is a post above that questions whether power filtration is being done on the AC feeds to the studio. And perhaps there are steps taken to isolate power cords from interconnects and speaker wire also. Perhaps there have been steps taken to minimize noise (which given the design folks involved, seems highly likely) and this minimizes or eliminates the positive contributions the power cord may make, and what other folks might experience in a home environment. It is worth considering at least. And if so, is there a way the average hobbyist like us can practically apply those techniques to our systems.
A reasonable hypothesis is that better sound comes from better shielding and filtering, in order to reduce noise.

Line filters like those I mentioned above, made by Schaffner and others (see, for example, http://www.schaffner.com/products/emcemi/) filter out electromagnetic interference.

Better quality signal cables have better quality shielding -- braided or foil+braided, vs foil or spiral (see http://www.mouser.com/pdfdocs/alphawire-Understanding-Shielded-Cable.pdf).

Both are relatively inexpensive and easy to experiment with, and I plan to do so. :)
 
So the theory is that the power supply that transforms AC into filtered / regulated DC sometimes needs "help" from the power cord.
 
So the theory is that the power supply that transforms AC into filtered / regulated DC sometimes needs "help" from the power cord.
Which makes no electronic sense, of course, other than the fact that the cord is there to "help" get AC from the wall socket to the power supply. :D

However -- purely hypothesising here -- there might be an argument to be made that environmental electrical noise can be picked up and transmitted over the power line, through the wall socket, along the power cord and into the amp via the AC connector and internal connection to the power supply components, which in typical cheap, brute-force consumer power supplies, only has filtering intended to smooth out 50/60hz hum but neither shield against nor filter out incoming electrical noise.

So, maybe a power cord with a built-in line filter will eliminate some noise.
 
Why would it? because you read it on the internet?
Yep. the same way you read BS cable white papers to reinforce your pathology. Or do the cable cos send yours by carrier pigeon, you being a benefactor. Too bad you had to drag this thread into the gutter.
 
Yep. the same way you read BS cable white papers to reinforce your pathology. Or do the cable cos send yours by carrier pigeon, you being a benefactor. Too bad you had to drag this thread into the gutter.
I don't start troll threads, I also don't read and ask what works in my system.

If nothing else, this should eliminate most of the carte blanche generalization, "your system is not resolving enough."

So in reading this article all you really did was validate what you want to believe. Or if it was a written article on the merits of using ACP cables and how they make your system sound better, that one wouldn't be true for you, nor validate your "OPINION"

So now back to my point, if you don't want ACP cables don't buy them, simple really right?

So what's the point of your thread?
 
You're welcome to improve the thread if you've got anything.
Okay.
I don't start troll threads, I also don't read and ask what works in my system.



So in reading this article all you really did was validate what you want to believe. Or if it was a written article on the merits of using ACP cables and how they make your system sound better, that one wouldn't be true for you, nor validate your "OPINION"

So now back to my point, if you don't want ACP cables don't buy them, simple really right?

So what's the point of your thread?
Rather than read, you rely on hearsay from fellow audiophiles who probably have a good deal less background, & more unresolving gear & street cred than the author of the article.
 
Rather than read, you rely on hearsay from fellow audiophiles who probably have a good deal less background, & more unresolving gear & street cred than the author of the article.

Nope, if I see something that interest me I buy it and try it out, very simple. You don't gain experience by reading, or what others might say they have done. I'm kinda the hands on type, if I wasn't and asked this site what system I should have, it would be far far different than what I own and enjoy now.
 
Status
Not open for further replies.
Back
Top Bottom