• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Pricey cables

Status
Not open for further replies.
Your AC power is typically routed around your house by Romex cable. Why not just leave a few few feet of it hanging out of the wall, with an IEC plug on the end? Would that not be more direct than any exotic power cable? I'm assuming that said Romex is on a dedicated circuit.
This approach would require a $60 IEC plug. :D

ACAR3455RIEC.jpg
 
We need a sub-thread - like a sub-directory - where you guys can dump all your cliched comments about the thread itself and leave this main thread for discussion about the OP.
 
We need a sub-thread - like a sub-directory - where you guys can dump all your cliched comments about the thread itself and leave this main thread for discussion about the OP.

Yeah, I've seen so many cable threads come and go that are just SSDD so it's hard not to be jaded.

I'll sit back waiting for that something new, but not holding my breath.
 
Has anyone ever been swayed by these arguments about expensive cables? Do you folks just enjoy arguing?
Probably at least into trying them. I think it is rather silly to have a closed mind on it without trying for oneself, particularly if someone has many thousands of dollars invested in audio. And yet I am sure there are some who have all their beautiful expensive equipment zip corded together, quite certain in their own closed mind that there simply cannot be any difference what so ever even though their high end stuff would be uniquely qualified to reveal a difference.

The second question, yes people do enjoy arguing.
 
Yeah, I've seen so many cable threads come and go that are just SSDD so it's hard not to be jaded.

I'll sit back waiting for that something new, but not holding my breath.
Fair enough - I'm bailing. I'll leave my 2 cents. It's unlikely IMHO that "advanced" cable design would have any effect in reducing conducted EMI. Shielding could reduce the exposure to radiated EMI - however the shielding stops at the wall. So mark me down as skeptical. I'm gonna go annoy people on the Music forums. :)
 
Not accepted. This thread is not about sound at all. It's about discussing why there cannot be, isn't, and never will be any audible difference between cable brands. The main topic movers happily confirm and prove to each other the absence of audible differences and now you dare spoil the scientific purity with your anecdotal observations?! If you're not interested in discussing the fine points of watching paint dry, you have nothing really to contribute here.

If one were to watch paint dry through very expensive rose colored (or any other tint) glasses will it dry faster and look better?
 
In posting the article, the main thrust about systems not being "resolving enough" is put @ rest. I dare say that not many audiophiles have a more resolving system. Whether one hears a difference or not, the "resolving system's" straw man is put to rest.
 
In posting the article, the main thrust about systems not being "resolving enough" is put @ rest. I dare say that not many audiophiles have a more resolving system. Whether one hears a difference or not, the "resolving system's" straw man is put to rest.
Let's see how many logical fallacies were found in the article:

1. Anecdotal fallacy - that a single cable from a single company represents the full performance available by every product available on the planet. Really? How does he know if he's only tried one? Not to mention that fact that you really need to provide a system solution for addressing power isolation, not just one of many components.
2. Appeal to authority - his studio system must be representative of all high resolution home systems. For reasons both good and bad. There may be fewer devices like computer based microwaves, dishwashers, refrigerators, cableboxes, etc. that spew noise into the AC found in a studio so there's less to address. Is that the same situation? I know that If had a $250k system, I would not be using a Benchmark DAC. :)
3. False equivalence - assuming that splitting the source signal to two DACs is exactly the same as running independently, Ever heard of a ground loop that is only evident when two devices are connected? That connecting them together doesn't share noise that may be filtered from a unit running in isolation?

It reminds me of an interconnect test found on the Australian guy with bad teeth's website. Click here and scroll down a bit. Anyone else understand or has measured (as I have) the overt flaw?
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom