• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Record Cleaning: Developing the Best Possible Methods

Status
Not open for further replies.
Most fake dollar bin ever! Sun Kil Moon, Built to Spill, XTC, This Mortal Coil...

And how fake is that "dirty record"

:rflmao::rflmao::rflmao:

Just wait, there will be some thread at some point asking if any techniques from a video like this actually work, then arguing with youbwhen you tell them it doesn't.
Did you notice the MoFi Original LP in the $1 bin? Was that Beck?
 
I grinned in the intro when the background guy in the shop said "this aint F-ing Goodwill!", I was then skeptical when I saw really good records in the $1 bin, I cringed when I heard lacquer thinner, I laughed when I saw the Maxi-pad, but I had to stop when he started rubbing with tin foil. Unwatchable.
 
I have a bag of polyquaternium-10. Useful for anti stat on lp's?

It's a really good antistat (which is why it is used in hair conditioners), but this class of quats can leave films. Might not be a problem at low concentrations (0.1% or lower), but you'd have to experiment with it first. The good news is that it is water soluble and can be removed with a detergent wash so it won't harm anything to try it. Let us know how it turns out!
 
I'll give it a try at very low level in my next US cleaning mixture which will be very soon. I should play an album before cleaning, then in a mixture w/o the quat and then again with it. I just can't bring myself to let my fairly new needle run the groove of an old uncleaned album.
 
Let us know how it goes with the polyquat-10. It's good to try different reagents. I have recently been messing around with a new formulation that appears more effective than everything else I've come up with, including my previous Triton/Hepastat mix. Still doing some final experiments, but it might just be the final mix I settle on as it is easy to get and can be used by itself. So far, everything is perfect (high detergency, removes most everything, neutral pH, no films or residue, good lubrication, antistatic, clean, silent records.) Doing concentration and compatibility tests now (including a friend doing GC/MS on a variety of samples) and will post these results when appropriate.
 
Now that I just bought 1500 years worth of Triton and Hepastat! But actually I AM excited about hearing the new formula!! :beerchug:

I just finished US cleaning my entire collection with that Hepastat/Triton formula! Now you're tellin' me I have to potentially start over?!? :no:

Though, I sort of liked cleaning my records; it gave me something to do.
 
I prefer unicorn tears myself.

You guys crack me up! :rflmao:
We’ve just had a ‘Unicorn’ craze here in the UK. Everyone and their neighbours went bananas over it and everything was about Unicorns! Bedding, Teapots, cups, saucers, wallpaper, pillows, folders, pencil toppers, cuddly toys etc....

Anyway, Unicorn tears are a bit acidic. For the ultimate clean, I myself use Mermaid juice to clean my records!
 
You guys crack me up! :rflmao:
We’ve just had a ‘Unicorn’ craze here in the UK. Everyone and their neighbours went bananas over it and everything was about Unicorns! Bedding, Teapots, cups, saucers, wallpaper, pillows, folders, pencil toppers, cuddly toys etc....

Anyway, Unicorn tears are a bit acidic. For the ultimate clean, I myself use Mermaid juice to clean my records!

I really don't want to know how you juice or milk a mermaid.
 
Hi all,

I read about 95% of this thread, but sorry if I missed any of this and I'm asking for repeated info. I purchased a Squeaky Clean a while back and I'm looking to homebrew a good solution.

I am curious, is there any big advantage to using the hepastat over the pure behentrimonium from Making Cosmetics other than ease of mixing? The little packet of behentrimonium seems much easier to store. Same with the EDTA. Hepastat contains some EDTA correct? How does the quantity in the hepastat record cleaning formulations compare with the original Vince formula? ("Ultimate Wash Solution" is: Triton (0.5%), EDTA (5 mM), and Behentriammonium Chloride (0.05%) and, occasionally, 5% IPA.)

Pricewise, it seems to be a wash for initial purchase. I haven't done the math on quantities but suffice it to say, ordering either should give me enough record cleaning solution to last a looooong time.

On another note, I use a product called Folex for auto detailling, it's meant for carpet cleaning but they say it can be used to clean vinyl (I'm assuming they mean upholstery) and other hard surfaces as well. It's billed as a water based non-ionic surfectant cleaner with no fragrance or solvents:

http://www.folex.net/folex-facts/

I'm curious if it's using one of the Tritons or Tergitols, I can't imagine Folex has their own chemical formula. (If they do, kudos to them, it's great stuff for carpet). In any case, if we could figure out it's concentration and specific surfectant I think it could be a good locally available option to satiate the dawn crowd. Folex + Hepastat (Or that one from sams club) could be the "Easy to get" version so to speak.

Or it could be no good. I don't know. But I'd like to hear one of the chemists weigh in on the subject. :)

Cheers,
Nathan
 
Hi Nathan. A 1:1000 dilution of Hepastat 256 is about 0.08mM EDTA, 0.006% non-ionic detergent, 0.0028% Ethanol, and 0.02% quat surfactants (none are Behentriammonium). So while this mix contains a useful amount of quat, the other components (non-ionic detergent, alcohol, and EDTA) are minimal. This is why we often mix it in with our normal detergent wash solution.
In terms of Behentriammonium reagents, we try to shy away from the beauty shop supply as these are not pure (usually only 70%) and the remaining components can cause precipitates (which can deposit on records). So if you use this, try to find laboratory grade or use in large dilution.
The Folex is interesting, but without any info (the MSDS is vague), there is no way to know what is in it and what concentration to use it at. Hence, I'd avoid it.
 
To those wondering about the new formula, I'm sorry it is taking so long but you may not realize what it takes to properly test such things. We have spent weeks of outside lab time (yet to be billed) and are already over $10K in labor and material costs. I've also had to purchase new equipment, including a very sensitive charge analyzer to measure static (my old surface voltmeter just wouldn't do anymore) and time on a GC-MS is hard to come by without spending a fortune. While everything is looking good so far, I would estimate that we have at least another 3 months of experiments before we thoroughly dial it in and come to useful conclusions. While there are commercial interests involved, I'm doing this purely for fun and feel no need to rush.
IMG_7233.JPG
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom