• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Record Cleaning: Developing the Best Possible Methods

Status
Not open for further replies.
I made it in 2016. Let me make a downgraded version.

@caseyjames - this is based on Rushton's formula, aside from the EDTA which I got from Vince. Rushton's formula is based on use of an ultrasonic cleaner and he recommended doubling the concentration for hand cleaning and vacuum machines. I'm using a Squeaky Clean so that doubled formula was my target. To go back to his formula, simply halve the concentrations or the amount of concentrate put into the final solution.
 
Ooooooh, I missed the USC vs. hand-washing part of that.

I use an USC cleaner and Rushton's formula with great results, so I'd assume people using your formula for handwashing/RCM cleaning will be pleased.
 
I don't even think I deserve the credit of calling it my formula. It's just Rushton's/Phantom Rebel's Triton/Hepastat mix plus Vince's EDTA recommendation in ratios fudged to ease measurement with standard household tools. :)

I kept the alcohol at 5% because I'm wary of alcohol personally and 10% sounded like a lot.

The EDTA helps pick up any metal salts that may get on the vinyl from a tap water initial rinse and should help break up any left by sweaty fingerprints or previous less scrupulous washing techniques. It's cheap insurance, if not entirely necessary. I read a few posters saying it made a big difference for them so I ordered some.

Cheers
Nathan
 
@ripblade Here's a link with .xls files in addition to the .xlsx. https://www.dropbox.com/sh/4ohxieumi08sbuz/AACOWoVXwIclAOOhO__lTTb1a?dl=0

I took the molarity of the EDTA down to ~2.5mM as I found that in my no-alcohol concentrate the volume of EDTA to mix in was quite high. With the ratio I was using, it didn't fully dissolve until I added the hepastat. YMMV and feel free to tweak. I think the batch I made last night ended up somewhere around 3mM.

Cheers,
Nathan
 
Last edited:
1. No alcohol. Just enough extra water added to the concentrate to make measurement easy. 2 tbsp or 15 ml per gallon of water yields approximately .26% Triton, .2% hepastat, and 5mM EDTA. 8 ml to 1L water yields nearly but not exactly the same, but is the closest round ml.
Is that tablespoons or teaspoons? 2 tablespoons = 30ml
 
Mixing the Triton that had tuned to a gel with alcohol did NOT remedy the problem...
The Triton does not mix readily with water. Do not mix it with alcohol. It needs to be mixed gently and for quite some time to mix properly. Mixing it in proportion to water of 50 ml Triton to 250 ml water and once it is mixed finish it to ratio you want. It is explained in one or more of the posts in this subject.
 
The Triton does not mix readily with water. Do not mix it with alcohol. It needs to be mixed gently and for quite some time to mix properly. Mixing it in proportion to water of 50 ml Triton to 250 ml water and once it is mixed finish it to ratio you want. It is explained in one or more of the posts in this subject.
Gently? I mix the the stuff together in a tightly sealed bottle and shake the bejeeses out of it.....for as long as it takes....it's a good workout lol.
 
I'm receiving my bottle of Triton today and can't wait to see how my washing system works. I made my own vac wand, bought the cheapest ($30) wet vac (Home Depot--Stinger),got some MobFi sleeves (I checked them for residue--none). All I need now is the Triton. I have read that mixing it into alcohol before the water is the best way to get it to mix. Yet I see in this thread, that someone says not to do that. Could I have a few more opinions on that, please? I plan on storing the unused portion of the mixture in the fridge to avoid mold.

Another thing is proportions. I've read that we should use just 8 drops to 16oz (actually, I think it's per litre) Someone here says 1:5. that sounds wrong to me...
 
Last edited:
I have found that if you have the time let it dissolve in water preferably overnight. If I'm less patient I have had success dissolving in alch(I use 99% if that makes any difference). Previously it has been stated that it did not mix well with the alch,not sure why but it works for me.
 
I mix mine into a concentrate with the hepastat and have not had any problems so far getting it to mix into my final wash solution. No IPA involved.
 
I read thru a bunch of posts re triton. I'm confused about the ".5%" of triton in the mix, as that is 47 drops per 16 oz, yet I see other mention of 8 drops per 16 oz of mixture.
 
Status
Not open for further replies.
Back
Top Bottom