Sansui Receiver Dust Cover?

[Loudpipe]

Anybody know where I could find a dust cover, preferably padded, for a G-22000? The more protection the better.

 

[MacMillan]

I have seen some on Ebay for sale....but I would check out a local seamstress and give her the dimensions for a custom fit cover done the way you would like...

 

[LBPete]

Or you could just use it more to blow the dust off of it.

- Pete

 

[john stumpf]

the guy on ebay that sells hallicrafters,collins etc radio covers will do them for your sansui as he did a pioneer cover for me. hes out of redding calif. and they are very nice

 

[Domimax]

the guy on ebay that sells hallicrafters,collins etc radio covers will do them for your sansui as he did a pioneer cover for me. hes out of redding calif. and they are very nice

What is his Ebay ID? Thanks

 

[john stumpf]

w6on (1939)

 

[Domimax]

w6on (1939)

Thanks, sent them a message.

 

[Sansui77]

I just had around 15 covers made by my lovely wife and are made out of Calico which is a light weight cotton fabric. They work great and allow the equipment to breathe which is very important but also stops the dust.

 

[Skywatcher]

A slip of cardboard works great and won't catch on the knobs or anything else.

 

[larryderouin]

Or an old pillow case, suitably modified.

 

[zebra03]

I use old concert t-shirt's .

 

[BLAH BLAH]

I use a fine haired paint brush...

 

[Skywatcher]

I use a fine haired paint brush...

How many does it take to cover the whole thing?

 

[BLAH BLAH]

A slip of cardboard works great and won't catch on the knobs or anything else.

If the cardboard slips how do you manage to keep it atop the Sansui?!?!?

 

[Skywatcher]

If the cardboard slips how do you manage to keep it atop the Sansui?!?!?

Well one day it slipped and beaned me on the head. It was then I realized the receiver was supposed to be horizontal.

 

[Bone Yard]

You could fab one from polycarbonate or acrylic sheet. It can be cut with woodworking equipment and solvent welded like pvc pipe. Look up videos on YouTube to see how, it's pretty easy to do if you have the tools.

 

[craggd]

These are also made by an ebay seller (https://www.ebay.com/usr/thecoverhub?_trksid=p2047675.l2559)

They are light weight and do the job nicely. You send dimensions and label you want and they do the rest.