• Please note that Audiokarma will be offline briefly for updates early on Monday morning, September 28th.

Sony TA-N55ES Restoration

amr2 said:
You have to cut strips greater than the size of the piece. Then glue the veneer withe the aid of a piece of wood with a blunt edge, pasting and applying pressure in the direction of the grain. Cut the leftover with a exacto knife, putting the veneer upside down, and leaving some leftover (1mm or less). Finally, finish off the edge with sandpaper.
Click to expand...
Excellent. This should have been more obvious to me but thanks for clarifying!
 
my power amplifier transformer burned. and I don't know the output voltage. I will get a new one. Tell me the voltage values. Thank you.
 
By the way, the restoration has been perfect. I will. By the way, I'm sorry I'm doing the English translation from google. If I write the wrong things.
 
Very nice work! I’m in the middle of powder coating a heavily rusted Yamaha M-2 case, would you mind sharing what powder you went with?

Thank you,
Dan
 
saabracer23 said:
Very nice work! I’m in the middle of powder coating a heavily rusted Yamaha M-2 case, would you mind sharing what powder you went with?

Thank you,
Dan
Click to expand...

Thank you Dan. The coating was applied by a professional, I can ask him what kind of powder he used if you want.
 
You must log in or register to reply here.
Back
Top Bottom