Speaker ID

[KrisM]

Hi!
Can anybody ID these speakers. The seller says there is no label on them.

Thanks!
KrisM

 

[Phototone]

Generally you can get a "clue" if you can remove the grill cloth board, and look at the drivers, and sometimes you may have to remove a speaker and look at what brand of driver is printed on the magnet or basket. You can also tell of the quality of the speaker by seeing how complex the crossover is. If it is just a cap or two, or maybe a cap and a resistor, then these are cheap speakers, and while they may sound good, are not valuable.

 

[wsissons]

yes there on edmonton kijiji..........go take a look dude....there free

 

[Dan ʕ•ᴥ•ʔ]

Could be Utah or Scott going by the grille cloth. But the grille frames appear to be removable, and most Utahs weren't.

 

[luvvinvinyl]

...You can also tell of the quality of the speaker by seeing how complex the crossover is. If it is just a cap or two, or maybe a cap and a resistor, then these are cheap speakers, and while they may sound good, are not valuable.

Can you elaborate, for those of us who may have missed your point with this, please?

 

[luvvinvinyl]

Grill looks "Utah-ish" to me.

Box proportions point that way, also.

 

[KrisM]

yes there on edmonton kijiji..........go take a look dude....there free

They are also a bit of a drive. I'll make a drive for something decent, but not for junk.
He has someone coming for them, but will let me know if he falls through.

 

[hifihippie]

They look like late 60's early 1970's speakers...get a pic with the grills
off :yes:

 

[KrisM]

I'll try.
Thanks for the tips. I know nothing about 60's/70's speakers.