I ordered the Moabs back in late February 2021. I finally received them (after 4-5 follow up calls) in August. Nothing special with customizations - just bi-ampable, in plain black, with floor spikes. One was damaged in shipping. A hole was poked into the surround of the top 12" driver. Nothing dramatic to affect the sound much, so I went ahead and started listening to them after contacting Tekton and sending pictures. I was assured a replacement was on its way.
I set them up in place of my much smaller towers - Monitor Audio RS6's. I've had the Monitors for a long time and I love them, but I craved for more power handling, and because of all the rage about Tekton, I decided to go for the big Moabs to take their place.
At first listening, I noticed they have a definite sweet spot. A very defined one, actually. So defined that the soundstage just disappears a couple feet to the left or right - that is, only one person at a time can actually remain in 'the spot'. Another problem I noticed was the lack of upper mid-range and heavily muddied lower midrange.
So, like anyone who has spent thousand of dollars on something they really wanted, I changed some things around in the hopes I was just doing something wrong. Changed cables. Changed amps. Changed preamps. Changed media. Changed CDs. Changed beer. Nothing made any difference.
A week later, I had a client listen to them with me. I simply told them I was reviewing the speakers and to be honest. They had the same experience. Poor upper mid-range and terrible lower mid-range. Vocals were harsh, grainy, annoying. The soundstage was mostly incoherent, even in the sweetspot (which was the ONLY place you could hear the upper end with any detail).
So, I was confused. How could speakers this big, this talked about, this exposed in audio conventions be so absolutely terrible?
I shifted them around the room. Put them in a different room, listened to them at every conceivable audio level. Always the same problems.
1) The bass was nice and tight. Drum sounds and bass are in your face and powerful, exciting, but lack realism. Think, wedding DJ loud and in your face.
2) Vocals were harsh and annoying. There was no getting over this. Even at low volumes, vocals were disconnected from their intended presentation. The upper midrange in general lacked presence - vocals sounds far away, small.
3) muddy and incoherent lower mid-range. Guitars, strings, vocals - all generally sounded smeared, hollow. Although details are present, they are not authentic. You have to really listen for them, they don't jump out at you.
4) The high end for sibilance and symbol crashes and the like were choppy and harsh, heavy distortion. The distortion at this frequency range is present in all volume levels.
5) Since they were bi-ampable, I listened to the tweeters apart from the woofers and vica-versa. Turns out, the 12" woofers are forced to handle much of the lower mid-range. No wonder it sounded muddy. And the tweeters alone were just absolutely terrible. Harsh, distorted, annoying. Very small sound - even with 15 of them.
I found myself listening to only one or two songs, then just walking away. I just hated them, no matter how I tried to justify what I was hearing (or not hearing). I even gave them the benefit of the doubt and contacted Tekton. I detailed what I was hearing and insisted that something must be wrong with them. Eric chimed in and asked about my room and my amplifiers. I responded with providing a picture of my room and the various amps I used (my favorite being a fully restored Carver TFM-75).
After a couple weeks, no response. I followed up. I was told Eric was out of the office and would reply soon. After another week of no response I followed up again and said it was time to start the RMA process. Still no response.
So I called and finally got the return process started. I packed them back up and sent them. 3 weeks later, I followed up after not hearing anything. I got another 'out of the office' response form someone so I waited another few days. Nothing again.
So I followed up by asking for the results of the speaker tests. Finally, they stated there was nothing wrong. Their tests were all good, just as good as when the speakers went out. (The irony was amusing at this point, I must admit).
I politely asked for a refund, as the speakers did not work for me - and received a simple, 'will do' as a reply. I never received another reply. I finally called two weeks later and was assured it would be done that day. 2 days later I contacted again and was assured that it would be taken care of...
Scary...
Anyway, they finally did come through with the refund, as frustrating and concerning the process turned out to be. And I never did receive a replacement driver.
So, my take away is this:
Buyer beware. Not only are their speakers suspect in quality, but their customer service is faltering. Which is a shame since I have heard good things about the Pendragons from friends, but I'm telling you, with over 30 years experience in audio, those Moabs are HORRIBLE.