Hi everyone. I am fairly new to AK and this is my first post to this thread. I just finished reading all 151 pages for the second time. It is great to have this much knowledge and experience available in one place. Many different roads taken but all arrive at the goal of incredible audio. I first discovered Tekton when researching some BIC America speakers. I had never heard of Tekton so I thought it was worth a look. That was about 8 months ago. Now I think I have read every review and article available and they seem to be just what I was looking for, based mainly on your posts.
I am almost ready to pull the trigger. Still figuring out which set. I plan of calling Eric before I order them. Probably going with the Double Impacts but Eric may have a better recommendation. I have zero experience with tubes so I will probably go the SS route. Currently using a Yamaha R-S202 2 channel receiver and, in my opinion, sounds pretty good. I was going to purchase an Emotiva amp and preamp but decided to get the Tektons first, see what that sounds like, then go from there.
Thanks for all of the information in this thread. It is a fun ride!!!
On the Tekton Website they do show a flat hardwood floor foot as an option. Probably padded or rubber on the bottom. Is there a sonic advantage to using the spikes?The DI's come with spikes for feet, not sure about the other models. I put hockey pucks under mine as to not destroy the floor, and they are very stable and will compensate for slight variations on the floor heights.
You will need 8 but they sell them in bags of 8 for not much money.
View attachment 2443307
Bob in WI, I noticed your speakers are located in a basement?. Concrete floor and block walls. It looks identical to my basement which is one of my two options for a pair of Tektons. (Not ordered yet). Has it been difficult dealing with the acoustics of all that block and concrete? I am assuming there is a wooden floor above that space? Rafters etc. I am just trying to get an idea if that is a doable environment. From what I have read here, it seems like the worst place to put speakers but...man cave! Your experience with this would be appreciated.View attachment 2435234 I made these using just a saw, hammer & screwdriver. The stands are on wheels as the Impacts are pretty heavy. I like the platforms you posted. Prolly help keep the speakers stable. The big ones can be a bit top heavy.
I don't know. I would think that it would make the speaker more stable, and having it move around could absorb some of the cone driver movement. The spikes that came with the DI's are very sharp and would go right through carpet.On the Tekton Website they do show a flat hardwood floor foot as an option. Probably padded or rubber on the bottom. Is there a sonic advantage to using the spikes?
According to Eric's videos, 4 ohm is the way to go performance wise. Most Emotiva and SS in general have no problem with 4 ohm. From what I have read here, some tubes can handle it and some cannot.Emotiva makes some of the best “bang for dollar “ stuff.
Bob in WI, I noticed your speakers are located in a basement?. Concrete floor and block walls. It looks identical to my basement which is one of my two options for a pair of Tektons. (Not ordered yet). Has it been difficult dealing with the acoustics of all that block and concrete? I am assuming there is a wooden floor above that space? Rafters etc. I am just trying to get an idea if that is a doable environment. From what I have read here, it seems like the worst place to put speakers but...man cave! Your experience with this would be appreciated.
Emotiva makes some of the best “bang for dollar “ stuff.
I have the speakers about 3.5' from the closest walls. From the listening positions, there is all kinds of space to the left & behind the listeners.
I have home made absorbers & hanging rugs to tame reflections. There is carpet on the floor between the listeners & the speakers. The carpet is on a decent pad.
I have isolated (sonically) the furnace & central vac canister. I figure big hollow metal cans will do the sound no good at all. I have not isolated the ductwork but it does not seem to cause issues.
Attached a few pics. You'll see the area rugs hanging from the floor joists & beams. My mashup seems to work pretty well but I'm sure theres much opportunity for improvement.
The concrete seems to absorb bass some. I need to have the volume at about 80db to get some punch (depending on the recording of course) and I'm not a monster bass lover.
There's a lot more info in the listening spaces forum here on AK. There are experts who frequent there.
Hope this helps. In my experience, its a lot easier to tame the basement than a moderate sized drywalled room.
Good luck. Let me know if I can assist further. Cool project - have fun w it.
Bob, thanks for the pics and the info. Looks like a place that any music lover would spend a lot of time. I'd call "shotgun" LOL. Somebody in an earlier post was using a sound insulation product in between the ceiling rafters. I think they got it at Lowes. Another post said that their ceiling modifications didn't make a difference. I will check out that listening space forum. Every situation is different. As they say, if it was easy, everybody would do it.I have the speakers about 3.5' from the closest walls. From the listening positions, there is all kinds of space to the left & behind the listeners.
I have home made absorbers & hanging rugs to tame reflections. There is carpet on the floor between the listeners & the speakers. The carpet is on a decent pad.
I have isolated (sonically) the furnace & central vac canister. I figure big hollow metal cans will do the sound no good at all. I have not isolated the ductwork but it does not seem to cause issues.
Attached a few pics. You'll see the area rugs hanging from the floor joists & beams. My mashup seems to work pretty well but I'm sure theres much opportunity for improvement.
The concrete seems to absorb bass some. I need to have the volume at about 80db to get some punch (depending on the recording of course) and I'm not a monster bass lover.
There's a lot more info in the listening spaces forum here on AK. There are experts who frequent there.
Hope this helps. In my experience, its a lot easier to tame the basement than a moderate sized drywalled room.
Good luck. Let me know if I can assist further. Cool project - have fun w it.
Thanks for the photos of your listening setup. I really like the way you've taken up the reins on making an unfinished basement and adding what's necessary to make an enjoyable music listening space. But I think the best part of your setup, besides the Tektons of course, are the BONGOS! I focused in on those right away. Priceless!
Another post said that their ceiling modifications didn't make a difference.
The concrete seems to absorb bass some. I need to have the volume at about 80db to get some punch (depending on the recording of course) and I'm not a monster bass lover.
Bob, nice setup. I have my listening space in the basement as well, although mine is finished. For me, the openness of unfinished seems to be more flexible when it comes to sound treatment. I have sound panels all the place and when not listening they sometimes get in the way. Anyhow, your comment above fired a neuron in my brain. Have you tried any type of bass “trap”? I’ve found shoving left over insulation, blankets, pillows really helps the bass. It doesn’t add bass, but more accurately reproduces the bass. Maybe take your paper towels and move them to the front corner and see what happens.
As for the ceiling, leave it open! I’ve got double hung drywall and 15 gallons of compound on top of that. Yes, 15 gallons. I remodeled the room and the ceiling wasn’t in good shape, but I didn’t want to gut it. So we “stippled” it. A nightmare! Anyhow my ceiling is like a trampoline for sound, I currently have strings strung across it holding up panels while I test what sounds best. While not a perfectly tuned diffuser, the open ceiling in your spot likely produces far less reflection than one solid flat surface I have.
Bob, your basement looks almost identical to mine. Block wall on right and front walls, open to the stairs and rest of basement on left. Biggest difference is that I will have a block wall behind listening area. Approximately 15' X 26'. I read that while doubled up drywall is the way to go for sound deadening, it is less then ideal for acoustics, just like Scorpio333 mentioned. I saw a different thread that talked about using a mirror to find your primary reflections and dealing with them first. Supposedly makes an audible difference. I couldn't quite tell from the pics if those were front or rear ported?The gray panels in the pics are bass traps, I just don't have them in the corners - maybe I should put them where they belong.
There definitely are spots where the bass is louder but its subdued at the listening position. Maybe its reflecting around & cancelling itself out?
If I finished the ceiling, I would use acoustic tile. To your point, drywall is very challenging.
My last house had paneling - that was awful. I ended up ripping it out - when I saw the wall behind the paneling, I realized why they put it up.![]()
Bob, your basement looks almost identical to mine. Block wall on right and front walls, open to the stairs and rest of basement on left. Biggest difference is that I will have a block wall behind listening area. Approximately 15' X 26'. I read that while doubled up drywall is the way to go for sound deadening, it is less then ideal for acoustics, just like Scorpio333 mentioned. I saw a different thread that talked about using a mirror to find your primary reflections and dealing with them first. Supposedly makes an audible difference. I couldn't quite tell from the pics if those were front or rear ported?
Bob, thanks for the pics and the info. Looks like a place that any music lover would spend a lot of time. I'd call "shotgun" LOL. Somebody in an earlier post was using a sound insulation product in between the ceiling rafters. I think they got it at Lowes. Another post said that their ceiling modifications didn't make a difference. I will check out that listening space forum. Every situation is different. As they say, if it was easy, everybody would do it.
I have owned the Electron SE's for about a year and a half now. I will be very interested in your experience. Forgive me if you mentioned it in an earlier post, but what are the electronics and cabling you are planning to use with them? I have been on an interesting journey with that. Glad you got to talk to Eric. Back in the day, I dealt exclusively with him and had several phone conversations, but I think it's a lot harder to get direct access now because of how busy he is.The final countdown (not the movie, though that was a fun flick) has begun. I talked with Eric, yesterday, and he told me my Electrons will be ready in 5 to 7 days. I had made a phone call to Tekton in the morning, but it wasn't answered after ringing a long time. After a few minutes or so, I received a call back, and started talking to the voice on the other end of the line, not paying attention to who called. After hearing him say that he designed the speaker, I asked for his name again, and he said it was Eric. Now that's pretty cool!
So, starting to get a little excited about the soon to be delivered speakers. I'll post updates, for sure.