• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

Maybe. 150 watts into Impacts seems appropriate and I don't listen particularly loud.
It does depend on what you listen as you noted above.

My OB Tektons are about the same sensitivity ( at 94 dbs ) and I've never powered them with more than 3.5 watts. High efficiency speakers like Tektons can reach a good listening level with a fraction of the first watt.
 
My OB Tektons are about the same sensitivity ( at 94 dbs ) and I've never powered them with more than 3.5 watts. High efficiency speakers like Tektons can reach a good listening level with a fraction of the first watt.

Have you ever powered them w more juice?
 
My OB Tektons are about the same sensitivity ( at 94 dbs ) and I've never powered them with more than 3.5 watts. High efficiency speakers like Tektons can reach a good listening level with a fraction of the first watt.

Curious here, how loud were your OB Tektons at 3.5 watts? I listen to a wide range of music, but some genres (according to, moi) just require higher listening levels. Probably shouldn't admit this, but the other day I was listening to a rock track and was listening at a volume that, if someone had been sitting next to me (my wife was out shopping leaving me to listen at "my levels"), we wouldn't have been able to hear one another.
I have no idea how much power I was applying, except that the speakers/track sounded awesome!
 
Curious here, how loud were your OB Tektons at 3.5 watts? I listen to a wide range of music, but some genres (according to, moi) just require higher listening levels. Probably shouldn't admit this, but the other day I was listening to a rock track and was listening at a volume that, if someone had been sitting next to me (my wife was out shopping leaving me to listen at "my levels"), we wouldn't have been able to hear one another.
I have no idea how much power I was applying, except that the speakers/track sounded awesome!

My sound meter has registered 100 dbs without audible distortion but that was too painful for any extended listening. I doubt I was using much more than one watt and still had headroom. 2 watts driving 96 db speakers will play as loud as 70 watts driving 84 db speakers. The first watt is where the power and dynamics lie and after that things go downhill fast. As Steve Deckert puts it, " there is 10 times the dynamic range in the first watt as in the second watt and it dwindles from there."

The goal is to reach a good listening level within that single watt so you hear all of what is happening in that all important first watt. More often than not that requires efficient speakers like Tektons. It's always watt quality over quantity which is illustrated by the common audiophile expression of "if the first watt sucks why continue".

Nelson Pass was so consumed with the "First Watt" he used it in his company name.
 
Last edited:
My sound meter has registered 100 dbs without audible distortion but that was too painful for any extended listening. I doubt I was using much more than one watt and still had headroom. 2 watts driving 96 db speakers will play as loud as 70 watts driving 84 db speakers. The first watt is where the power and dynamics lie and after that things go downhill fast. As Steve Deckert puts it, " there is 10 times the dynamic range in the first watt as in the second watt and it dwindles from there."

The goal is to reach a good listening level within that single watt so you hear all of what is happening in that all important first watt. More often than not that requires efficient speakers like Tektons. It's always watt quality over quantity which is illustrated by the common audiophile expression of "if the first watt sucks why continue".

Nelson Pass was so consumed with the "First Watt" he used it in his company name.
Please refresh my memory...what amp(s) are you using?
 
Without a crossover AND mid 90s efficiency is the best scenario for the tiny watt amps IMO. I wonder if the Perfect SETs incorporate a crossover and if they do, how it differs from other Tektons.

Deckert also mentions how crossovers, if complex, can muck things up.

Running the Se84 2 watt with the Pens would get to 80db, with peaks over 100. Any louder and it would break up. Thing is, at about 70db it's a VERY, VERY nice sound...but it eggs me on to turn it up a little, little bit more...crap...out of gas or distortion. Conversely, I also tried a 360w Carver with the Pens. Meh, it sounded cold and lacked dynamics, narrower soundstage but the low end slammed with impact.
 
Running the Se84 2 watt with the Pens would get to 80db, with peaks over 100. Any louder and it would break up. Thing is, at about 70db it's a VERY, VERY nice sound...but it eggs me on to turn it up a little, little bit more...crap...out of gas or distortion. Conversely, I also tried a 360w Carver with the Pens. Meh, it sounded cold and lacked dynamics, narrower soundstage but the low end slammed with impact.

Its a balancing act.
Also depends on your taste in music & the sound you prefer.
I'd like to hear a system like PGeists some day.
Only low watt tubes I've heard were old & very wooley - bass thru a blanket kind of thing.
Cool but not the sound I prefer.
 
More power never hurt in my experience.

I've run the Lore References off a number of amps and found they did better with more power behind them. It was a pretty big difference to me between the 6wpc single ended Musical Paradise MP-301 and a 300wpc Class D Audio SDS 470C. The little tube amp was great for low volumes and less complex music but would strain and make the music sound congested when I turned it up. The big amp just made the speakers sound clear and effortless at any volume; they were still a bit shouty though which the tube amp hid better.

It likely comes down to room size and listening preferences. I like having more power because I like to listen to demanding music at higher volumes. YMMV. :)
 
Last edited:
I'm not one for loud head banging music or exaggerated bass. That's one reason I sold the Omens which to my tastes were too much of a rock speaker. I started building highly efficient open baffles which offer fine detail at low levels. Too often folks crank their amps up higher and higher in order to hear more into the music but in reality what they are experiencing is insufficient resolution. The need for more SPL's nearly always signifies that.
 
My other interchangeable flea watt amps are a Miniwatt S1 ( 2.5 wpc ) and a Dennis Had single ended EL 84 ( 4 wpc ). I have a Decware ( 2 wpc ) on order.

Thanks for letting us take a peek at your setups! Always interesting seeing unique systems others have put together. Tube apparatuses, to me, are really fascinating and visually exotic. Appreciate you posting photos of them!
 
My first pair of full range single driver speakers were these Fostex Tektons. When Eric started his business that was pretty much all he sold. I remember speaking with him on the phone regarding my choice of placing the driver on the wide side of the baffle. Time flies as that's been a long time ago. I've owned and built many speakers since then but I still have these Tektons. I've probably posted this picture before but here it is again. It's not my listening room but the wife lets me take gear pictures there.

I think the Fostex Tektons were a hard sell for Eric as potential customers probably felt cheated with just a single small driver. But they wouldn't know all that's lost when stitching two dissimilar drivers together with a sounding robbing passive crossover.

This is what some call a FAST system ( Full-range ASsisted Tech) where the full range speaker plays full range sans crossover while the woofers provide bass support. The two Dayton woofer amps have built in low pass controls.

P6030003.jpeg
 
Last edited:
Tekton Electrons - A Report

I've been breaking in my Tekton Electrons for about 5 weeks now. The Electrons are my first tower speakers. I have been enjoying listening to them, and depending on what I listen to, the Electrons sound fantastic! And, like many have said about Tektons, and I am sure other high quality speakers, poorly/mediocre engineered recordings sound lifeless, or worse. I am finding that if I use equalization, I can bring these poor/lifeless recordings to a level of listenable enjoyment. Newer recordings that I've purchased, or streamed, sound wonderful without adding/manipulating EQ.

How I listen to music is mainly via streaming. I have Amazon Music HD, Apple Music (lossless), Radio Paradise (who stream lossless), and my personal flac/aiff files stored on an SSD attached to a Bluesound Node 2i. I haven't used EQ in decades. I was okay with accepting what the sound engineers put to the final release of an album/song. I do not have a physical EQ device yet, though I do have a Schiit Lokius on order (now at a 4-6 week shipping timeframe, 6-8 weeks when I ordered one). In the meantime, I've been using Apple Music's 10 band graphic equalizer, which surprisingly, is very effective at attaining the sound I prefer to those recordings that I feel need help. The use of Apple Music's equalizer is when I am streaming from my Mac laptop to Airplay2 (the Bluesound Node 2i, in this case). When I stream Amazon Music HD from my laptop, I use the onboard equalizer included with Rogue Amoeba's, Airfoil. Both equalizers, Apple Music and Amazon Music HD, are very effective.

My Tekton Electron's sound fantastic, however, not all music is engineered to my/our liking. When I read, from other forum members posts, that Tektons are very revealing of a recording's engineered sound, I knew what that meant, but now I really know how much those statement/s ring true.
 
Back
Top Bottom