• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

SET amps do seem to be more popular these days. Personally I've never had the opportunity to hear them first hand, in the correct system they are supposed to be pretty amazing.

You can always try swapping in a tube powered preamp into your existing system to experience what they may or may not do for you. Some believe its a way to balance the magic of tubes with the low end control of solid state. Always comes down to correct matching, synergy, and personal preferences.

Amazing if you like distortion :D
 
Amazing if you like distortion :D

Have you ever heard a SET amp driving HE speakers? I'd say most folks on this forum have not.

Walk into a boutique audio store and you'll see high power amps galore which are necessary to drive low efficiency panels but it's highly doubtful you'll encounter a SET. In all my years of visiting high end shops in major cities I've yet to see one.

It's the oldest and simplest amp circuit and with fewer parts.

Other amps require negative feedback for increased power whereas SET's do not use negative feedback which is a major advantage. All SET amps operate in class A and don't require biasing like push pull tube amps.

If you only need a few good watts and enjoy detail resolved at low levels there's nothing better.
 
Personally I've never had the opportunity to hear them first hand, in the correct system they are supposed to be pretty amazing.

Trust me, they are. I have a Bottlehead Stereomour 2A3 that is hard to beat if your other components compliment it properly. OTOH, I also have other higher powered SS state amps, both modern and vintage. I mostly use them for a second system. For some reason I always seem to go back to the SET :scratch2:
 
Have you ever heard a SET amp driving HE speakers? I'd say most folks on this forum have not.

Yes, I have. I heard the Stereomour driving some Fostex's several months ago and I've heard their older stuff as well; can't recall the names. Plus some of their preamps...Bee with stepped attenuator was one and that battery powered one was the other.

Also, used some tube stuff from Music Reference (Ramlabs) to demo some speakers I designed; again can't recall the model.

Tubes are fine with me but I don't prefer them to SS or class D. To each their own. ;)
 
Last edited:
Yes, I have. I heard the Stereomour driving some Fostex's several months ago and I've heard their older stuff as well; can't recall the names. Plus some of their preamps...Bee with stepped attenuator was one and that battery powered one was the other.

Also, used some tube stuff from Music Reference (Ramlabs) to demo some speakers I designed; again can't recall the model.

Tubes are fine with me but I don't prefer them to SS or class D. To each their own. ;)

I don't disagree with you. I like SET In a small room and not with just a pair of 4.5" Fostex full range drivers. Now add in a couple powered subs and some Heil tweeters and the world gets much better. In a large room I'll take big speakers with SS power and a good tube pre like an ARC or VTL. That is why I have both. I really don't like my Tektons with flea power any where near as much as I do with 100 SS watts a side or more. I prefer my GHH's for flea power. :smoke:
 
I liked the APPJ/Miniwatt SET driving the Omen's and I would expect it to sound good with the Lores.

picture.php
 
Could someone describe the sonic differences between single, full driver speakers and whatever the Lore 2.0 design is? I know the former does not have a crossover, while the latter ought to have a 'benign' one to still make it very sensitive. Tradeoffs?

If the crossover issue could be overcome and still keep the coherency of single, full drivers, I guess that would be the best of both worlds, presumably presenting no actual recess in the frequency distribution tails and at the same time offering the specific transducer behavior for the high frequencies through a second separate (tweeter) transducer.

If the transducers are light enough and very dynamic to allow for speed and high sensitivity (i.e., Eminence 10"?), would the trick be designing a breakthrough crossover device that would be sonically unnoticed under practical conditions ?

How close do you guys think the Lore's (or Pendragons, or Enzo's, for that matter), are to this apparent goal? What about the cabinet design to allow that large (10") transducer to recreate bass at the pace, SPL and depth that would be satisfying, without recurring to a Sub (down until 35-40 Hz, of course)?

Don't mind my sounding-board imposition if you are totally freaked out by this post. Sorry and thanks for any insights.
 
My bias is full range single drivers but if a super tweeter is used then the simplest crossover makes the most sense.

Many such examples like the Omens really should be called 1 1/2 ways as the tweeter comes in so high it's almost an after thought.

How much of a part does the tweeter play in the sound of the Lores? I don't know but the super tweeter in the Omens was often difficult to hear. Maybe someone can disconnect the Lore's tweeter and take a listen.

My question is would any of you have considered the Lores if it only used a single driver? I doubt you would.

With many of my DIY speakers I try to use just a first order single cap on the tweeter. In order to do this you need a good match between full range driver and tweeter. It allows the FR driver to run full range unimpeded by a passive crossover in the signal path.
 
Could someone describe the sonic differences between single, full driver speakers and whatever the Lore 2.0 design is? I know the former does not have a crossover, while the latter ought to have a 'benign' one to still make it very sensitive.

I'm not sure I'd consider the crossover in the Tekton's to be "benign" Based on pics, it looks like a fairly standard two way crossover. For me, a benign crossover would be a single cap on a tweeter which will only come into play at a high frequency. Anyone know what the crossover frequency is on a Lore 2.0 is?
 
Yes, I read that paper even before I acquired my Mini Torii from the author. I was tempted by Omega's full (single) driver approach, but two things prevented me from doing it:

1. Price, for the soon to be available 8" driver speaker at USD 1,850 (8", 98 dB @ 8 Ohms) which was the only one capable of satisfying my sensitivity and 'slam' needs

2. Roll-off at frequency extremes ... a moot point, as many people cannot hear those extremes anyway ...

Then, I read about Tekton's new Lore and decided to give it a try. I hope I did right, as I cannot feasibly return these heavy devices back for a refund (logistics would make that prohibitively expensive).
 
Well, a single Cap on a tweeter (or even cone whizzers), are not really crossovers ... more like pseudo-crossovers, so I agree those would be the best alternatives (1 + 1/2 way). But, depending on design, a true crossover does not have to be a significant burden in the signal path between audible frequency ranges ... I agree the pictures showing a standard artifact as a crossover on Tekton's design seem complex, but I'm hoping the results for many current users show there are no real issues with it. Time will tell ... mine are about a week from getting here (already in Miami since yesterday!)
 
Could someone describe the sonic differences...

I've heard and owned a number of single driver designs. The big difference to me is that instead of getting a really good slice of the frequency range you're getting the whole pie (a good one too).

This "coherency" you're speaking about is really just phase shift and most crossover designs address this. BTW, a bigger transducer like the Eminence is usually faster in it's bandwidth since is doesn't have to move (excursion) as much to reproduce the frequencies its intended to handle.

I don't think the goal was to recreate a single driver experience because most of them suck (at bass for sure). The goal was to create a really live sounding speaker that reproduces all genres well.

Since you appear interested in speaker design I'd check out PE Tech Talk or DIY Audio. They are great resources for questions like yours.
 
In the case of my Zu's it really was about the single driver experience as that super tweeter added just a tiny cymbal shimmer on the very top end and not much else.

So how much of the Audax tweeters can you hear with the Lores? Cup your ear over one and listen.

The Omen's bass was one of it's strong suits.

I've used other large Eminence drivers that were very satisfying run full range. The Beta12LTA, being a favorite, can be as entertaining as any high dollar Lowther. It was the basis for the legendary Hammer Dynamics Super 12 which mounted a small monocle tweeter. There's nothing like size for a grand sense of scale which is not possible with the smaller although more detailed wide banders.
 
Thanks guys. So, at the end of the day, is the tradeoff slam vs detail? I know Omega claims all the details are there with their 4.5" and larger single-drivers, but even Louis Chochos is coming up with a new 8" driver for the basis of his 2015 line-up. I guess I won't be missing any slam with my Lore 2.0, but what about details?

Could any original Lore owner give some feedback regarding detail mining from their speakers? (I'm of course assuming the original and version 2.0 are more or less equivalent, as per Eric's own statements.) Has anyone here listened for a while to an Omega 4.5" full driver speaker and also a Lore or similar Tekton design? I would love to learn about those differences/tradeoffs. Reason I ask, I have a tube amp which is literally a tube rolling platform, so I can get, for example, an expensive pair of NOS E80CC Tungsram tubes in place of the 12AU7 which will surely further open up the sound, compensating for any warmth or potential lack of finer detail projection in the Lores. If this is not the case, my current driver/output tube complement could remain in place.

Thanks again for all your input guys.
 
Last edited:
Of these three the Omens were less detailed but made up for detail loss with a wonderful big sound. The Lores/Omens are not your little girl with a guitar speaker. While no slouch with acoustic jazz I really enjoyed how the Omens sounded playing Dire Straits most. They literally filled my entire house with music.

The Fostex Tekton 4.5 over H-frames are my favorite of the lot as they have both detail and that big sound. Without the H-frames they lose at least an octave.

The Fostex Frugal Horns with bass augmentation are not far behind. But without bass support you'll get the fine detail but with a thinner overall sound. You'll hear more of the spit in Miles trumpet with the 4.5 Fostex vs the Omen's 10" Eminence but it's likely you won't need bass support with the larger driver.

P6130005-1.jpg
 
Thanks guys. So, at the end of the day, is the tradeoff slam vs detail?

No. You are still getting the details but they are accompanied by other frequencies that a single driver does not reproduce well. The tradeoff you speak of doesn't really exist. If single drivers were the solution then most, if not all, high fidelity systems would use them. The reason they "seem" more detailed is because they are reproducing a specific bandwidth that your ears are very sensitive to.

Multi-driver systems are capable of greater detail because instead of asking one driver to do it all you can parse out the frequency spectrum to specific drivers that are engineered to reproduce those specific frequencies. Some people like single drivers, but there's nothing magical about them and they can always be beat out by a proper multi-driver system.

If you're really curious about them (single drivers) though, I recommend picking up the Fostex Kanspea kit for like $150. It uses a FE103en which can be used in many different enclosures. So one can really experiment away...even with cardboard baffles :)
 
Last edited:
Actually I would argue that one of the reasons single driver designs can provide more detail is that you don't have an output that's run through all the extra wires, inductors, capacitors etc. that crossovers entail. When you then add to this the fact that multi way speaker designers have to figure out how to get completely different driver designs (the tweeters, mid range drivers and/or woofers) with different colorations and efficiency specs, often tied together out of phase, attempt to sound identical to each other, you are affecting the output in ways that can detract from the illusion of detail.
 
If a speaker is perceived to be more detailed then what more could you ask for?
One's perception is really all that matters.

Full range speakers certainly aren't for everyone and neither are SET amps.

Few start there compared to the many that end there.
 
Back
Top Bottom