• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

Sure, that is why I thought about the caps' wiring. If it is wrong on one speaker, it is probably the same with the other. As I just messaged Eric, the issue has a common cause, affecting both speakers.

The chances of my amp or DAC to fail exactly when hooked to the new speakers is even more remote, but I guess possible. I will have to unpack my older speakers (packed them tidily today to make room for the new ones) and test that out (I was hoping not having to do that for a while before making comparisons between the two).

Thanks!
 
Sure. Try a different source first like a cdp, tuner, etc with your amp. Play with different inputs. Use headphones with the amp to verify the source is good etc. There are lots of ways to troubleshoot. The other reason I kind of doubt the caps is because even when I've screwed up a crossover it's still usually worked. I might just not get highs or low etc. To bugger up both hi pass and low pass means the power or ground aren't wired correctly. Anyway, good luck.
 
Yes guys, thanks. The funny thing is, I only swapped the speaker cables from my older speakers to the new ones, other things being equal, so this is kind of weird. I'm tired now, but tomorrow I'll unpack my older speakers and see what happens. My only source is my laptop, as older gear has been stored years ago and I don't use iPod (I'm from the old school, mind you).

Thanks again for all your suggestions.
 
Last edited:
As others have said it's unlikely that both speakers would be defective.

Swapping one component for another will by process of elimination find the problem.
 
I added a pair of Heils to my M-Lore's just to see how it would sound. The Heils totally transformed this speaker. The soundstage is up where it should be now, the highs are way better and they actually gained in efficiency. I also noticed increased resolution. This is a great combination!

P1020378_zps1d0e83bd.jpg

Excellent :thmbsp:
 
I'd bet anything the problem is not with the speakers. There is no way both speakers could be defective. The problem has to be with the connections. You'll get it figured out. :thmbsp:

cubdog
 
I added a pair of Heils to my M-Lore's just to see how it would sound. The Heils totally transformed this speaker. The soundstage is up where it should be now, the highs are way better and they actually gained in efficiency. I also noticed increased resolution. This is a great combination!

P1020378_zps1d0e83bd.jpg

Way trick, man. :thmbsp:
 
Hi guys, sorry I alarmed you on this one. I unpacked my old speakers and everything worked fine as usual, so I gave it another try with the Lore's and voilá, sound from them for the first time!

To this minute I still don't have a clue what went wrong yersterday, as I used exactly the same connection and configuration today and the Lore's have been working flawlessly for about two hours now.

Thanks to all for the support. I'll be reporting on my impressions by the time these babies settle down.
 
glad to hear they singing as they they should. U'll luv em.
Im gonna write Eric to see if I can get grills for mine.
 
I did not think I would use them, so I declined on the grills. I cover the speakers overnight with clear plastic bags to prevent humidity ... Other than that, these look just fine without the grills.
 
Lores are starting to open up, with great bass. The initial midrange veil is gradually vanishing. I have them on spikes over a rug and I'm starting to enjoy the beasts ... The sound coming out of these larger cabinets with a 10" driver has more body and weight. It's still too early, though. I'll post definite impressions in a couple weeks or so. Thanks!
 
VERY good, Fireblade! Also good to hear that you're liking them. I look forward to a future report. Enjoy!
 
There are some used M-Lores (SE Michigan) and Lores (Buffalo) for sale on US Audio Mart (not mine and no relation). Just passing this on.

(Mods: please move to D&S if not appropriate for this forum.)
 
Back
Top Bottom