• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

"I also thought outriggers would add a nice touch." You taking your speakers deep sea fishing?

I'll take both...

125-outriggers06_zps05c5e790.jpg


3_7outriggers_zps5ac4f074.jpg
 
New Tekton Reference

Just unboxed them!
Really red and bigger than I thought.
Sounds good but needs break in
 

Attachments

  • image.jpg
    image.jpg
    82.8 KB · Views: 158
They didn't replace any speakers. Been doing headphones for quite a while due to condo constraints.
The paint is like Ferrari red. High gloss!
 
It's an Eddie Current 445 amp. Only 3 class A watts at 8 ohms so not too loud.
I live in a condo so it avoids temptations.

I'm not familiar with that amp. It does look very nice. Is it considered a headphone amp first, speaker amp second or was it designed to handle both equally?

cubdog
 
My new Lore 2.0's are really starting to open-up tangibly now, and so far I'm really digging them.

What is curious and something new for me, is that on top of the usual multi-variables involved in the fine-tunning of a sound setup, the new speakers are also demanding changes in what I thought were pretty stable conclusions regarding the tube complement in my amp.

I have been able to 'resurrect' a couple of tube choices I had discarded because these could not mate well with my previous speakers. With Tektons, those tubes are really creating synergy in my system, as the speakers are more robust when it comes to beamy and somwhat edgy but quite accurate preamp drivers, making enjoyable most other output tubes in my stable.

By now, I've only put some 18 hrs on them, and these babies keep improving. Presumably, this will stop, at least at this accelerated rate, by the 20th hour, and then gradually but slowly continue improving until the 200th hour mark.

We'll see. I'll report my impressions at 25 hours or so, just to be sure the speakers have achieved the first 80% of all the potential they offer by design.
 
Last edited:
I'm not familiar with that amp. It does look very nice. Is it considered a headphone amp first, speaker amp second or was it designed to handle both equally?

cubdog

It is marketed as a Headphone/Speaker amp. The company's other models are all Headphone Amps.
I think the Lore Reference though could use more power as I have to run it at about 70% to get it where the volume to the levels I Like.
I would have loved to get the Lore 2.0 because of higher sensitivity but they are too large for my space.
I had gotten a wife permit for bookshelf speakers and the Lore Reference were quite a stretch!
 
I also thought my Lore 2.0 would be too much for my smallish listening room, but I was wrong. It can be played at relatively low volumes and still get good sound. I was suggested the Reference or the 2.0 by Eric for my setup and I definitely went for the bigger 'oomph' of the larger ones. Still in break-in.
 
Based on some posts earlier in this thread, I tilted my Lore S back so they fire more towards the listeners head. I'm sure my knees were really enjoying the music before but my ears much prefer this way. Don't ask me how I failed to think of something so obvious. I'll have to make or procure some more permanent stands. Sometimes the simple things make a big difference.
 
I tried Poultrygeist's method of using lag bolts in the front to provide the tilt. It is a good idea and improved the sound, but not as much as when I added the Heil tweeters. Now that was a HUGE transformation.

On another note, I have tried a lot of different types of amplification with the Tektons and I keep going back to the hot rodded Bottlehead Stereomour with the JJ 2A3-40's as the best overall sound. Not the loudest or with the most headroom, but man it is HARD to beat a 2A3 directly heated single ended triode (SET) for the highest in sound quality!!!!
 
Back
Top Bottom