• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

I did, Macassar ebony veneer. Eric told me the cabinets were done a few months ago.
Then the Seas drivers used in the 2.0s were discontinued or unavailable so he had to find new drivers to use and had to do some redesigning. Last i heard "he should be done in 2 days." That was 3 weeks ago. :dunno:

I had 2.0s coming in cherry since April, would hear they'd be done "in a couple days" every couple weeks. I guess Eric has been going through some stuff. Sadly the veneers are the bottleneck. I switched to the standard black and they're shipping tomorrow.

Eric definitely has the drivers. As others have noted, they aren't Seas drivers. The bass driver is an Eminence B102 and the tweeter's identity isn't published but Eric will tell you if you insist on knowing (as I did).

Eric is a great guy, if not the most on-top-of-it businessman. Calling works better than emailing in my experience.
 
I had 2.0s coming in cherry since April, would hear they'd be done "in a couple days" every couple weeks. I guess Eric has been going through some stuff. Sadly the veneers are the bottleneck. I switched to the standard black and they're shipping tomorrow.

Eric definitely has the drivers. As others have noted, they aren't Seas drivers. The bass driver is an Eminence B102 and the tweeter's identity isn't published but Eric will tell you if you insist on knowing (as I did).

Eric is a great guy, if not the most on-top-of-it businessman. Calling works better than emailing in my experience.

I too am going to go with just a standard black finish, decided that I wanted to save the money and time and just get the satin black. Now I just have to decide which model to go with. What made you go with the 2.0 over some other models? I am leaning towards the 2.0 due to listening to a lot of rock and industrial/alternative like Primus and NIN and so on. I am sure the Reference would do just fine but the 2.0 looks like it would be a real winner with that kind of music. I have been reading up on that Eminence B-102 driver, and it seems to be a real nice driver.
 
I too am going to go with just a standard black finish, decided that I wanted to save the money and time and just get the satin black. Now I just have to decide which model to go with. What made you go with the 2.0 over some other models? I am leaning towards the 2.0 due to listening to a lot of rock and industrial/alternative like Primus and NIN and so on. I am sure the Reference would do just fine but the 2.0 looks like it would be a real winner with that kind of music. I have been reading up on that Eminence B-102 driver, and it seems to be a real nice driver.

I have similar music needs as you and Eric pushed me towards the Lore 2.0 for the deeper bass response. I usually need to try before buying audio equipment, but you really can't do that with Tekton speakers, so I went leap-of-faith mode and decided to trust Eric 100%. Obviously that means listening to his advice, but I'm also pleased because the big Lore seems to be the most fully realized version of the Tekton philosophy of high-efficiency, pro-sourced drivers and simple design. As far as original vs 2.0, I was a little skeptical of the significantly less expensive tweeter in the 2.0 but I trust Eric's ears. He said the two models sound similar but he actually prefers the implementation with the cheaper tweeter. Also it's temporarily the less expensive speaker, so that's a plus too.
 
Last edited:
I have similar music needs as you and Eric pushed me towards the Lore 2.0 for the deeper bass response. I usually need to try before buying audio equipment, but you really can't do that with Tekton speakers, so I went leap-of-faith mode and decided to trust Eric 100%. Obviously that means listening to his advice, but I'm also pleased because the big Lore seems to be the most fully realized version of the Tekton philosophy of high-efficiency, pro-sourced drivers and simple design. As far as original vs 2.0, I was a little skeptical of the significantly less expensive tweeter in the 2.0 but I trust Eric's ears. He said the two models sound similar but he actually prefers the implementation with the cheaper tweeter. Also it's temporarily the less expensive speaker, so that's a plus too.


So is there any difference besides the tweeter with the Lore and Lore 2.0? What does the Audax tweeter do that the 2.0 tweeter doesn't do?
 
So is there any difference besides the tweeter with the Lore and Lore 2.0? What does the Audax tweeter do that the 2.0 tweeter doesn't do?

They are crossed over really high, so the tweeters are almost more like super tweeters and I think that's why the differences aren't at the forefront. They are only adding the highest bit of sparkle and detail.

- Woody
 
So is there any difference besides the tweeter with the Lore and Lore 2.0? What does the Audax tweeter do that the 2.0 tweeter doesn't do?

The Audax Gold tweeter is a very expensive tweeter, found on some very pricy speakers. One assumes it's a really great transducer. The tweeter in the Lore 2.0 is not nearly as expensive, but it's not a cheap part. It is notably more efficient than the Audax tweeter, rated by the manufacturer at 98 dB. Eric mentioned that there are only a few tweeters that can really go solo on such an efficient speaker, and this one is his favorite.
 
I wouldn't put much stock in either tweeter as they only add a bit of sparkle on the top end. The Lore driver is a wide band speaker and if you disconnect it's tweeter you might not notice any difference.
 
I wouldn't put much stock in either tweeter as they only add a bit of sparkle on the top end. The Lore driver is a wide band speaker and if you disconnect it's tweeter you might not notice any difference.

Yup. This is the point I was trying to make. You summed it up better than I did.

- Woody
 
They are crossed over really high, so the tweeters are almost more like super tweeters and I think that's why the differences aren't at the forefront. They are only adding the highest bit of sparkle and detail.

- Woody

But that is what I am looking for, that little bit more of high frequency sparkle and detail that I feel I am missing from my M-Lore. And of course a little more slam on the bottom end too.

So with that being said, is the extra $100 worth the Audax tweeter in the regular Lore?
 
But that is what I am looking for, that little bit more of high frequency sparkle and detail that I feel I am missing from my M-Lore. And of course a little more slam on the bottom end too.

So with that being said, is the extra $100 worth the Audax tweeter in the regular Lore?

I owned the regular Lore's, so I'll I have ever heard is the Audex. I can't give an opinion really. I would talk to Eric. If the specs of the two tweeters are close then I can't imagine that the difference is very much.

- Woody
 
I owned the regular Lore's, so I'll I have ever heard is the Audex. I can't give an opinion really. I would talk to Eric. If the specs of the two tweeters are close then I can't imagine that the difference is very much.

- Woody

So with that said, do you feel like the Audex gives you all the crispness and detail I am looking for?
 
So with that said, do you feel like the Audex gives you all the crispness and detail I am looking for?

It seems you've settled on choosing between the Lore and Lore 2.0. Why not just give Eric another call and tell him what you're looking for? He'd be the best person to give you an answer at this point as I assume there's very few people who have compared those two head to head.
 
If crisp & clean is your goal, just cut to the chase & get the Lore S with the SEAS drivers. They are crisp & clean, not sharp or harsh ... unlike any others I have heard. If you like a big bottom end, you'll want a sub. I still laugh when I hear a cymbol decay into silence on the buggers - great fun. Good luck with your selection.
 
Picked up new integrated. If you've been following along, I've been using a TPA3116 based SMSL-SA60 with a pair of Lore Reference. I'd been thinking of a Brio-R, but then a deal came up on this:
18880916864_223483e246_c.jpg


I'll post impressions later. Oh, it's a Teac AI-2000.
 
Picked up new integrated. If you've been following along, I've been using a TPA3116 based SMSL-SA60 with a pair of Lore Reference. I'd been thinking of a Brio-R, but then a deal came up on this:
18880916864_223483e246_c.jpg


I'll post impressions later. Oh, it's a Teac AI-2000.

Very nice! Is that the one they just reviewed in Stereophile along with the Sprout?
 
If crisp & clean is your goal, just cut to the chase & get the Lore S with the SEAS drivers. They are crisp & clean, not sharp or harsh ... unlike any others I have heard. If you like a big bottom end, you'll want a sub. I still laugh when I hear a cymbol decay into silence on the buggers - great fun. Good luck with your selection.

Heck, maybe I will just go all out and get the Seas Pendragon
 
Back
Top Bottom