• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

I'm running a Cary SLP-05 all tube preamplifier with an ATI 2007 solid state amp. I really like the combination. I had switched all the tubes on the Cary out for vintage, with the exception of the 5AR4 rectifier tube. Today I got in a 1960 Mullard 5AR4. I'm debating on waiting until the Double Impacts get a 100 hours on them, before swapping out the tube. I'd like to know what improvements belong to what upgrade.

I never head back from Eric about the 'ding' on the Double Impact speaker. On one hand it's not a big deal, on the other, I'd like $3000 plus to get me an undamaged speaker. Not sure if there is anything he can do without me sending it back...and it's just not worth it.
 
Sounds like I'm going to have to try an all tube preamp with a solid state amp down the road. I could switch back and forth between the tube and SS amp depending on my mood.

I also like vintage tubes.....especially my matched quad of RCA black plate 6L6GC's from Vintage Tube Services.

Jimbo, looks like you'll have to either live with the ding or send it back for replacement. Don't think I'd want to bother with sending it back unless the ding was painfully obvious so I wouldn't blame you if you just lived with it.
 
Just meaning that I'm upstairs and not on the stable ground floor. Which I've come to find is the worst mistake an audiophile could ever make.:(
As a side thought...would it be possible for you to determine which direction the floor joists are running...and drill holes at one end of the room and blow cellulose insulation into those cavities to fill them ? I had a similar problem with my master bedroom and when I was done it made a HUGE difference in the sound....as an added bonus it significantly lessened the amount of sound heard downstairs....just gotta make sure you pack em tight.. i used a peice of 2' vinyl hose i threaded down between the joists and pulled out as i backfilled...WELL WORTH THE EFFORT..
'
 
Sounds like I'm going to have to try an all tube preamp with a solid state amp down the road. I could switch back and forth between the tube and SS amp depending on my mood.

I also like vintage tubes.....especially my matched quad of RCA black plate 6L6GC's from Vintage Tube Services.

Jimbo, looks like you'll have to either live with the ding or send it back for replacement. Don't think I'd want to bother with sending it back unless the ding was painfully obvious so I wouldn't blame you if you just lived with it.

I'm going to live with the ding. I'm just extremely picky.....to a fault. The important thing is that the speakers are amazing.
 
You have every right to be picky with brand new speakers Jimbo. I'm sure Eric would make good on it, but like you I wouldn't want to deal with the hassle of shipping them back.

On a good note, they must really move some air driven by your amp! You rattling the walls with all my that bass? It's amazing how they can deliver such brute force yet be so refined and delicate when needed. Just close your eyes and enjoy the sound and you'll forget all about that ding in no time.

Btw, I just made an offer on Proceed HPA 2. A 250 watt SS amp that is a trickle down product from Marc Levinson. I owned one years ago and it's a beast and sounds great. I'll use it in my home theater until I get an all tube preamp. This forum is costing me too much money! lol
 
Thanks mac for the name of the compound. I may not need it but in case I do I have the name of it. Jimbo I have a friend who has a Cary slp-05 preamplifier. That is a very fine product, he really likes his.
 
You have every right to be picky with brand new speakers Jimbo. I'm sure Eric would make good on it, but like you I wouldn't want to deal with the hassle of shipping them back.

On a good note, they must really move some air driven by your amp! You rattling the walls with all my that bass? It's amazing how they can deliver such brute force yet be so refined and delicate when needed. Just close your eyes and enjoy the sound and you'll forget all about that ding in no time.

Btw, I just made an offer on Proceed HPA 2. A 250 watt SS amp that is a trickle down product from Marc Levinson. I owned one years ago and it's a beast and sounds great. I'll use it in my home theater until I get an all tube preamp. This forum is costing me too much money! lol

I only bought the Cary SLP-05 preamp because I got it for a little over $3000 from my friend who is a dealer. It is a dealer demo but looks brand new. I figured if I didn't like it I could easily get my money back out of it. The ATI is a nice amp that leans more towards the warm side than other solid states I've owned. It doesn't seem to have the low bass slam that my Passlabs Aleph 5 did. I don't crank the volume up too much, though the Double Impacts do invite it.
 
As a side thought...would it be possible for you to determine which direction the floor joists are running...and drill holes at one end of the room and blow cellulose insulation into those cavities to fill them ? I had a similar problem with my master bedroom and when I was done it made a HUGE difference in the sound....as an added bonus it significantly lessened the amount of sound heard downstairs....just gotta make sure you pack em tight.. i used a peice of 2' vinyl hose i threaded down between the joists and pulled out as i backfilled...WELL WORTH THE EFFORT..
'

Very interesting idea..and I'm just desperate enough to try it. I might PM you for some info on that. Thanks very much!
 
Anyone using a or has used a Rega Brio-R integrated with their Tektons? I'm exploring/researching other options to drive my Lore Reference. I'd like it to have a good phono stage and provide good strong low end. From reviews the Rega seems to check these boxes even with only 50w x ch.
Also been eyeing vintage like Accuphase E202, Kenwood higher end models, maybe Marantz, but only looking st ones that have been serviced or restored, so prices can be as much as a good modern day amp.
Thanks
 
Anyone using a or has used a Rega Brio-R integrated with their Tektons? I'm exploring/researching other options to drive my Lore Reference. I'd like it to have a good phono stage and provide good strong low end. From reviews the Rega seems to check these boxes even with only 50w x ch.
Also been eyeing vintage like Accuphase E202, Kenwood higher end models, maybe Marantz, but only looking st ones that have been serviced or restored, so prices can be as much as a good modern day amp.
Thanks

I used a Brio-R with my Lores for a short time and thought the combo was terrific. Some of the first gen Brio-R's had him issues according to some users, but both of the ones I had were quiet.

The new 2017 Brio-R is probably even better and I think you'd love it with your Lore Refs.

Depending on your budget I'd also consider looking at a Croft Phono Integrated, or a used Sonnetteer integrated. I think mid-powered British integrateds would be great with the Tektons.

- Woody
 
I used a Brio-R with my Lores for a short time and thought the combo was terrific. Some of the first gen Brio-R's had him issues according to some users, but both of the ones I had were quiet.

The new 2017 Brio-R is probably even better and I think you'd love it with your Lore Refs.

Depending on your budget I'd also consider looking at a Croft Phono Integrated, or a used Sonnetteer integrated. I think mid-powered British integrateds would be great with the Tektons.

- Woody

Thanks Woody. Good thing is that most of the reviews on the Brio-R are pretty consistent across the board with how it sounds. The Croft and Sonneteer seem fairly obscure and hard to come by, but i'll keep an eye out.

One integrated I was also considering was a used Krell KAV300i from the mid-late 90's. A friend of mine has been using one since new with his ProAc Response towers and it sounds fantastic, of course his speakers also have something to do with that. The Krells are so well made, they are built to last for sure, just not sure i want to drop $1k-1,200 on a 20 year old amp, plus it doesn't have a phono stage.
 
Hey guys, well I'm back after being away for a week and have made some changes to our library system with the Double Impacts. I have two tube preamps, an Antique Sound Labs MG OTL 32 DT (all tube headphone amp/preamp) and an Odyssey Candela (tube front end). Both have audible issues with their current tubes. I was using the Candela with the DIs and playing some music with strong bass at an elevated volume. When the song ended, I noticed a very weird sound in the left channel. My first thought was that I had damaged one of my Emotiva XPA-1L monoblocks. However, after further investigation, it appears that the heavy bass has exacerbated an issue with the Candela. I previously spoke with Klaus about the occasional turn on noise I was getting with the preamp and he suggested replacing the two 12AU7 tubes. So for now, I thought I would try the ASL preamp. However, it has a very noticeable hum and noise with the volume at minimum. I ended up going with all solid state by adding the Emotiva XSP-1 G2 preamp. This preamp is so quiet that I have to put my ear right up to the tweeters to tell they're actually on! Now, I am running a full differential balanced signal path from the Music Hall 25.3 DAC to the amps, so that definitely makes a difference. I realize that Emotiva gets a bad rap on a lot of "audiophile" sites, but for me, I now have the sound I was looking for, minus room issues. By the way, even in a crappy (sound wise) small room, the Double Impacts sound stunningly real and live! :D
 
Great to hear mgb. I had noise issues with the Candela/Kismets with my Enzo's even though everything was brand new. I didn't have the noise with Magneplanars so I attributed it to the high efficiency of the Tektons exposing the amp or preamp noise that didn't come through the inefficient Maggie's. My Raven tube amp had some background noise also. Both Odyssey and Raven are ultra high current designs, maybe they're more noisy? I don't know, but it's a frustrating issue to deal with and I'm glad you found a solution and are enjoying the Double Impacts.

I've been tempted to try Emotiva for my home theater system but they seemed too good to be true. You're the second audio nut ( I say that in the most complimentary way!) that has praised them. I think I'll have to try their processor and amps. I know Eric recommends them.
 
Great to hear mgb. I had noise issues with the Candela/Kismets with my Enzo's even though everything was brand new. I didn't have the noise with Magneplanars so I attributed it to the high efficiency of the Tektons exposing the amp or preamp noise that didn't come through the inefficient Maggie's. My Raven tube amp had some background noise also. Both Odyssey and Raven are ultra high current designs, maybe they're more noisy? I don't know, but it's a frustrating issue to deal with and I'm glad you found a solution and are enjoying the Double Impacts.

I've been tempted to try Emotiva for my home theater system but they seemed too good to be true. You're the second audio nut ( I say that in the most complimentary way!) that has praised them. I think I'll have to try their processor and amps. I know Eric recommends them.
Thx Mac, I have had a fairly good exposure to high end solid state electronics, since I used to repair McIntosh amps when I worked in the industry. I thoroughly enjoyed the C34V preamp and MC7270 amp I used to have, along with the KEF 107 Reference speakers. However, I am having to keep costs down these days, so I look for lower cost alternatives that I can be happy with. So far, I've been pleased with the Emotiva devices I've purchased. If I want variety, I can listen to my home theater system, which has a pair of Odyssey Stratos Extreme monoblocks running a pair of GoldenEar Triton Ones for the front channels. After assembling these two systems over the last few years, my wife sometimes needs to remind me that we're done with upgrades for the foreseeable future! Getting close to retirement and living on a fixed income...;)
 
I had noise issues with the Candela/Kismets with my Enzo's even though everything was brand new. Both Odyssey and Raven are ultra high current designs, maybe they're more noisy?

My Kismet mono's are DEAD quiet on anything I put them on... like I wonder if they are on quiet. Anytime I've had noise it's been from upstream. They are pretty high gain, so they do magnify noisy components. It's been an issue with my Modwright LS100 preamp (and never was with my Juicy Music) to the point that I sent the pre back to Modwright for a checkup. Dan Wright did bring a few things up to spec, but he also said my 6SN7 tubes are pretty close to shot from a noise perspective. I bought it used and have no clue as to hours... so I'm going to replace the tubes when I get it back this week and try it again.

All that to basically say that I would guess maybe the Candela's can be a little noisy with iffy tubes in them.

- Woody
 
My Kismet mono's are DEAD quiet on anything I put them on... like I wonder if they are on quiet. Anytime I've had noise it's been from upstream. They are pretty high gain, so they do magnify noisy components. It's been an issue with my Modwright LS100 preamp (and never was with my Juicy Music) to the point that I sent the pre back to Modwright for a checkup. Dan Wright did bring a few things up to spec, but he also said my 6SN7 tubes are pretty close to shot from a noise perspective. I bought it used and have no clue as to hours... so I'm going to replace the tubes when I get it back this week and try it again.

All that to basically say that I would guess maybe the Candela's can be a little noisy with iffy tubes in them.

- Woody
Thanks Woody, I'll eventually try some replacement tubes for the Candela to see if I can get the background noise levels low enough to not be an issue with the DIs. It seems likely that when using high gain amplifiers, these speakers will let you hear any noise from the upstream components. I've seen recommendations for the Amperex Bugle Boys on the Candela, but they are running around $350/pr!
 
Thanks Woody, I'll eventually try some replacement tubes for the Candela to see if I can get the background noise levels low enough to not be an issue with the DIs. It seems likely that when using high gain amplifiers, these speakers will let you hear any noise from the upstream components. I've seen recommendations for the Amperex Bugle Boys on the Candela, but they are running around $350/pr!

Send a DM to byoungman1 here on AK and tell him what you need... he's always got sweet tubes and he is more than reasonable. You won't have to spend anywhere near that for a nice set of Amperex's (which are usually my favs in small signal tubes.) For $350 a pair they must be pinched-waist or something... that's nutty money.

- Woody
 
Woody

Even if you get a "quiet" set of tubes in the LS-100 you may still find out you need the Rothwells to have more flexibility with the volume control. I have to use them now with the PS Audio BHK amp and it's input sensitivity is closer to 1.5 volts.
 
Send a DM to byoungman1 here on AK and tell him what you need... he's always got sweet tubes and he is more than reasonable. You won't have to spend anywhere near that for a nice set of Amperex's (which are usually my favs in small signal tubes.) For $350 a pair they must be pinched-waist or something... that's nutty money.

- Woody
Thanks for the tip, Woody! I guess I'm not the only one who thinks those prices are crazy!
 
Back
Top Bottom