• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

mgb1985

I tested a lot of different 12AU7/5814 tube sets when I was experimenting with a Line Magnetic DAC last year. To my ears the consistently best sounding and quietest were the Raytheon Black Plates from the 50's - early 60's. They can be had for less than a third of the cost of Amperex tubes. Another inexpensive good sound alternative is the RCA Clear Top. I tried and still have all the usual European suspects (Mullard, Amperex, Siemens, Telefunken) as well as the American brands. The combo of the Odyssey amps and the Candela is a good one but when Alex and Klaus test them it is with their speakers which have sensitivities in the mid-80's not the high sensitivity of the Tekton's. The combination of a 14db gain preamp and a 1 volt sensitivity amp can be a bit much with 90+ db speakers.
 
mgb1985

I tested a lot of different 12AU7/5814 tube sets when I was experimenting with a Line Magnetic DAC last year. To my ears the consistently best sounding and quietest were the Raytheon Black Plates from the 50's - early 60's. They can be had for less than a third of the cost of Amperex tubes. Another inexpensive good sound alternative is the RCA Clear Top. I tried and still have all the usual European suspects (Mullard, Amperex, Siemens, Telefunken) as well as the American brands. The combo of the Odyssey amps and the Candela is a good one but when Alex and Klaus test them it is with their speakers which have sensitivities in the mid-80's not the high sensitivity of the Tekton's. The combination of a 14db gain preamp and a 1 volt sensitivity amp can be a bit much with 90+ db speakers.
Thanks, Seminole54! I'd love to try some of these less expensive options to hear the differences. I've never really pursued tube rolling, although I know it's a popular pastime among audiophiles. My new arrangement with the Emotiva solid state gear is absolutely silent, but I thought it would be fun to try using the Candela on the home theater bypass inputs of the XSP-1 preamp. That would give me the option to add in that wonderful tube sound whenever the mood strikes! :)
 
Though I am sure you are enjoying the "silence" of the SS combo, my preference is to use a tube preamp with a SS amp. The Candela is not inherently a noisy design but rather I think you have a combination of noisy tubes and high gain. One way to find out if it is tubes or gain is to buy a set of inexpensive "'modern" tubes like the Tung Sol 12AU7's from a reputable dealer who checks for noise and try them. They are about $15 each.
 
Woody

Even if you get a "quiet" set of tubes in the LS-100 you may still find out you need the Rothwells to have more flexibility with the volume control. I have to use them now with the PS Audio BHK amp and it's input sensitivity is closer to 1.5 volts.

I have a set of the Rothwells on the way for the U.K... they must be on the slow boat.

I talked to Dan Wright and he made several updates to my preamp. There are some adjuster pots inside that he said can become noisy, he replaced them with fixed resistors. He also updated the standoffs and replaced some diodes. So it for sure wasn't 100%. He let it play in their showroom for several hours using EH Golds and said he was very pleased with it. He popped in my Black Treasures and said he was like "WHOA!" With how noisy they were.

I have three sets here on loan to try, but I think I'm going to order a couple new production tubes with warranties also. Maybe Northern Electrics.

Okay — now back to Tektons.

- Woody
 
Though I am sure you are enjoying the "silence" of the SS combo, my preference is to use a tube preamp with a SS amp. The Candela is not inherently a noisy design but rather I think you have a combination of noisy tubes and high gain. One way to find out if it is tubes or gain is to buy a set of inexpensive "'modern" tubes like the Tung Sol 12AU7's from a reputable dealer who checks for noise and try them. They are about $15 each.
Now that's a great idea. Cheap troubleshooting step to see if the tubes are the problem. I want to rule out any other possibilities, such as a cold solder joint, that could produce the anomalies in sound with the Candela. By the way, I have been using combinations of tube preamps with SS amps for the last few years, with great success. Most of these noise "issues" are more recent occurrences that have been showing up as I have been relocating equipment and pairing them up with higher sensitivity speakers. It's likely that my previous Magnepan 3.6R speakers were hiding some of these problems, due to their lower efficiency.
 
Great to hear mgb. I had noise issues with the Candela/Kismets with my Enzo's even though everything was brand new. I didn't have the noise with Magneplanars so I attributed it to the high efficiency of the Tektons exposing the amp or preamp noise that didn't come through the inefficient Maggie's. My Raven tube amp had some background noise also. Both Odyssey and Raven are ultra high current designs, maybe they're more noisy? I don't know, but it's a frustrating issue to deal with and I'm glad you found a solution and are enjoying the Double Impacts.

I've been tempted to try Emotiva for my home theater system but they seemed too good to be true. You're the second audio nut ( I say that in the most complimentary way!) that has praised them. I think I'll have to try their processor and amps. I know Eric recommends them.
Hey Mac...just picked up an Emotiva balanced xpr gen 2 preamp about 6 weeks ago.....so far....LOVING it.....worth giving them a try..AND its made right here in the good ol USA....NOW to save up for those D.I.speakers.....
 
Good to hear dylster and I'll definitely give their stuff a try. I'm thinking the XMC-1 with an XPR 4 channel amp would make a nice theater system with two pair of Lores. I prefer a 4.1 configuration especially since the Lores image so well.

Are they making all their stuff in the US now? I thought only the XMC-1 was. I do prefer made in the USA products but would still try their amp if it's made overseas.
 
Good to hear dylster and I'll definitely give their stuff a try. I'm thinking the XMC-1 with an XPR 4 channel amp would make a nice theater system with two pair of Lores. I prefer a 4.1 configuration especially since the Lores image so well.

Are they making all their stuff in the US now? I thought only the XMC-1 was. I do prefer made in the USA products but would still try their amp if it's made overseas.
Im not sure they have moved ALL their production to Tennessee but I believe all the amps and preamps have been moved...Nice to see a "made in the USA" label again....After I get the Double Impacts I plan on checking out their new offerings..I've heard whispers of both a new tube amp and newly designed monoblocks utilising the gen 3 architecture....We shall see....
 
Emotiva designs and engineers all their products in Tennessee but only manufacture the XMC-1 there, everything else is made in China. Hopefully they'll switch to producing more products over to Tennessee as I have a hard time not supporting products made in the USA. For now I'll stick with my Outlaw 975 processor and my old Proceed amps. I do like the look and pricing of their stuff though.
 
If you look at the XPA Gen 3 you will see this statement- "Designed, Assembled, and Tested in the U.S.A.".
Of course the components are imported but at least they have better quality control over the final assembled product.
 
I see that now butchgo, thanks for pointing that out. They list the XMC-1 as made in Tennessee and the Gen X amps as assembled in Tennessee. I'm not sure what the difference is exactly but I like that they're building more products here. They should promote the fact they are building more products here, it's something well worth promoting. In their "About Us" section they only list the XMC-1 as made here. Their Tennessee facility is very impressive looking and I'd be much more likely to purchase something made there. Their XMC-1 with the Gen X amp along with my Oppo 105D and 4 Tekton Lores would make the a nice home theater system.
 
Anyone using a or has used a Rega Brio-R integrated with their Tektons? I'm exploring/researching other options to drive my Lore Reference. I'd like it to have a good phono stage and provide good strong low end. From reviews the Rega seems to check these boxes even with only 50w x ch.

I am running a Brio-R with my Lore Reference. You can click on my system thread in my signature for my thoughts. I think a posted some thoughts in this thread. Short answer, it's a nice combo and definitely has some boogie at 50w/channel. I also ran them with a Teac AI-2000 that puts out 125w/channel. It had less energy at low volume, but could really wake up and control the drivers when cranked a little. I could see why Eric likes the high wattage SS amps for his speakers.
 
I see that now butchgo, thanks for pointing that out. They list the XMC-1 as made in Tennessee and the Gen X amps as assembled in Tennessee. I'm not sure what the difference is exactly but I like that they're building more products here. They should promote the fact they are building more products here, it's something well worth promoting. In their "About Us" section they only list the XMC-1 as made here. Their Tennessee facility is very impressive looking and I'd be much more likely to purchase something made there. Their XMC-1 with the Gen X amp along with my Oppo 105D and 4 Tekton Lores would make the a nice home theater system.
Hey Mac...just left the Decware site...you have both a Decware Zen Tori and a Raven Blackhawk (if i remember from an earlier post ) ...which of these amps to you prefer with the D.I"s ?
 
I haven't listened to the Torri yet dylster, it arrives tomorrow. I did audition the Torii Jr on the DI's and definitely preferred it over the Raven Blackhawk which prompted me to sell the Blackhawk and buy the Torii. To my ears the Decware amp is very special. They are so transparent, liquid and dynamic which plays to the DI's strengths. The Decware with the DI's takes realism to a whole new level, more so than any amp I've owned. I also like that the Decware is all point to point wired, has only one capacitor and resistor in each channels circuit, is built in the US and comes with a lifetime warranty.
 
Guys-

I have Dali Helicon 400 speakers with 2 serious DIY subs (I can post the build thread if you want to see). I talked to Eric about Double Impacts and he said they were the best speakers he's ever built, and that someone who had Dalis and got the DIs were blown away.

Question is, do I go for the DI and consider ditching my subs or go with something like the Brilliance and keep them? Or go DI and tune in the subs and just have ridiculousness going on?!?!

Someone on another board said he didn't like his friends DI, but loves his Brilliance. Only negative of the DI I have seen so far and he refused to offer specifics.

Obviously this is all just opinion, conjecture, and bench racing (to use a car metaphor) but I wanted to hear it from actual Tekton owners. And it will never happen if I don't sell the Dalis.

Associated electronics: Odyssey Kismet Monos, Odyssey Candela Pre, AURALiC Altair streaming DAC.
 
I've had my Tekton Lores and Rogue Cronus Magnum II for about 3 weeks now. I've never been more pleased with a pair of speakers. The sound is wonderful from top to bottom. Best purchase ever.
 
I haven't listened to the Torri yet dylster, it arrives tomorrow. I did audition the Torii Jr on the DI's and definitely preferred it over the Raven Blackhawk which prompted me to sell the Blackhawk and buy the Torii. To my ears the Decware amp is very special. They are so transparent, liquid and dynamic which plays to the DI's strengths. The Decware with the DI's takes realism to a whole new level, more so than any amp I've owned. I also like that the Decware is all point to point wired, has only one capacitor and resistor in each channels circuit, is built in the US and comes with a lifetime warranty.
I showed my girlfriend the Torri with the black base and she said "My God that's BEAUTIFUL ! "......am def looking forward to hearing your impressions of the amp...CRAP I need a second AND third job.....
 
Does anyone out there have the gray finish on their Tektons?
The reason I am asking is that our little theater room is painted with two different shades of gray and I was curious what it mike look like.
 
Dobbler, while the DI's certainly don't need subs it would be quite interesting trying them with them. While I know I don't need to add a sub I'm actually considering getting Tektons new Brisance sub. Might be a waste of money or it might be something amazing and there's only one way to find out! I've not heard anyone disliking the DI's but I can see where some would prefer the Brilliance, just like some preferring the Seas Pendragons over the Pendragons. According to Eric the Seas drivers provide more of a refined audiophile sound whereas the Emminence drivers provide a more dynamic, live sound that emphasizes realism over minute detail. One sound isn't better than the other it's just what one prefers. I happen to love the dynamic realism of the DI's and they have plenty of detail. Lastly I used to own the Kismets and Candela, they would work very well with the DI's but you might have to strap yourself into your chair so that you're not blown back against the wall!

Congrats fsdaron. I have a pair of Lores on order and am looking forward to hearing the speaker that started things for Tekton.

I'll keep you posted dylster but I guess it takes 300 hours for it to start sounding good and 1000 hours to fully break in. I think you should order one for your girlfriend since she likes the way it looks......audio jewelry!
 
Butchgo, the Lores I have on order will be the BMW metallic mineral gray. Eric has pics of that color on his blog but I'll post pics when I get mine.
 
Back
Top Bottom