• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Turntable on receiver?

Raise it by at least 2 inches if you do to allow decent airflow out of the vents. A hole saw in a drill and some mdf or 7 layer plywood make good equipment risers.

Had no other option but to stack in my workspace system so had to improvise..:D Not keen on replacing any bulbs in this Aiwa relic so added a cheap fan to keep things cool.
 

Attachments

  • free feet (2).jpg
    free feet (2).jpg
    48.6 KB · Views: 31
  • akai.jpg
    akai.jpg
    81.3 KB · Views: 60
Heat is the enemy. Putting the TT atop the receiver holds heat in the receiver and cooks the innards of the turntable- not good for extended periods- reduces component life and rubber component flexibility.
 
I used to have a PL-L800 TT placed on my 2385 for months at a time and never had any kind of issues whatsover involving heat or whatever so it can be done.Not saying that it should be done but just that it can be done!Maybe different outcome for other types/brands but it can work:)
 
Commonly called "stacking", looks cool, convenient and uses less space, that's the plus side. On the other hand the receiver will overheat from having the vent blocked by the turntable. The turntable will cook sitting on the receiver and there's a good chance of electrical interference from the receivers transformer. One of the biggest enemies of electrical components is excessive heat build up. Bottom line at least from me it's not recommended.

+1:thmbsp::yes::smoke:
 
As long there is adequate room between the two to allow for proper air circulation, I wouldn't see a problem. But, it's not always the best if you goal is to isolate the table.
 
Mythless that was another issue I didn't touch on and thanks for bringing it up re the isolation of the turntable which is critical to its performance. Out of the gate if the turntable is on shaky ground you'v lost the battle, proper placement is key and I highly recommend a wall shelf or very sturdy audio equipment stand designed for a turntable that's segregates the turntable from other components.
 
I think it's a great idea and why not feed the cat from the platter of the tt and let it use the speakers for sharpening the claws.
;-)
 
A lot of systems were made for stacking - the receivers/amplifiers usually doesn't have a ventilation grille on top. Some models extended a bit farther to the back so the heat sinks could dissipate without it getting to the turntable.
 
Back
Top Bottom