Well I purchased the caps this eveni. ng to redo the crossover networks. I went with 6 x KBG 8uf 400V 5% PIOs from fleabay for the mids and 2 x Rike Audio S-Caps 8.2uf 600V PIOs for the tweeters.
This weekend I plan to start giving the W90s some love. I also want to open them up and inspect each driver and inspect the surrounds. I need to clean the pots and fix one of the knob on the back that is cracked.
I'll share pics as well.
Well, they sure as heck don't sound muddy any more!
So I must say after setting up the speakers on the vibrapoded and felt footed stands and dialing in the placement these are sending out the Best sound I've ever experienced in my system. I can't believe how amazing it sounds. Spinning some MFSL Santana Abraxas and I'm in heaven. Threw some daft punk vinyl on and it sounds unbelievable! Old and new these speakers are no joke! Can't wait to recap them and hook them up to a restored Scott 299. Right now I'm using an H/K 730. Got to admit my Klipsch Cornwalls never sounded this good.
![]()

Nice... I've seen that jawdrop smiley before... W90's have that affect.
Boy, I may have to try a pair of those Rikes sometime. The surrounds on your woofers are "a molded, resin-impregnated cloth, rubber-treated to damp resonances". That's straight from the brochure page. The mids and tweeters have woolen surrounds. I saw what looked like a rip on one of the woofer surrounds. Or was that just the light playing tricks in the picture?
Yeah, you have the same type of W90's that I do. Dual 3-way, with dual ports and dual sand-filled rear panels. Alnico magnets throughout. Nice, huh? Now, wait 'til you really get the placement dialed in perfect. You need to measure from the left and right sides of the baffle, not the center (And you measure from those two points to the centerpoint of your listening spot). The W90 has a baffle that's almost 28" wide, plus the dual mids/dual tweeters are impedance-matched, so it's important to measure from two points instead of one, and those two points must be equal (That's how you know the speaker is aimed directly at you). And that's not even getting into that complicated "golden ratio" business on the Cardes' website. Hope you're not busy for about a month.
Give "Let It Bleed" a try. If ever there was a speaker for that album, the W90 is it. Late '60's rock in general will really shine with those.
By the way, do you happen to have a picture that shows the whole mid/tweeter panel? Those early ones with the tall, gold-painted alnico Super 3 look pretty-cool. Those Russian 5% oils will do wonders for the midwoofers. Good choice. You don't want to skimp on the midrange caps. That's what I was told. But with two high-flux alnico cone-tweeters, I imagine those are very-important as well. Glad they turned out well.
Oh wait, you haven't even RECAPPED them yet??? Oh wow, are you in for a treat.
Love the stands by the way. And good job pulling those apart. Did you have any trouble pulling the mid/tweeter panel out? I haven't done that with mine.
My preferred setting for the mid and tweeter levels is 3:00 for both. Gives me the best combination of bass, midrange, and treble. Yours have one pot for the woofers, don't they? What does it do? Mine only have two pots. Your W90's are VERY-early ones.
Someone else said the same thing about Cornwalls. Anyone who has had problems with their Cornwalls will probably be wild about W90's. It might be a room thing. Perhaps Cornwalls are very-finicky in that way, 'cause I know Cornwalls are very-nice, very-expensive speakers. Don't really know, but I've had at least two others say the same thing.
Mine have the "gnub" on the right woofer, yes.GT,
Does your W90s have a bunged woofer or is it like mine with 2 normal alnico?
I am NOT selling my Cornwalls. They are early models and in great shape. I have updated the tweeters and redid the crossovers. But there is no question at all. In my room with my equipment and the music I generally listen to the stock original W90s destroy the Cornwalls.
Yup. That's just what someone else said. He compared them to Crites-modded Cornwalls, and I think he even used the word "destroyed" as well. My guess is that Cornwalls need a much bigger room than W90's. I think those mirror-imaged mid/tweeter arrays play a BIG part in that. The W90 does not need a wide room, that's for sure. It does apparently help to deal with room nodes and all that other stuff I really have yet to understand, but you have them off to an excellent start for sure. I'm still fooling around with placement, but they've never sounded better. Those woofers have some speed to them for 53 year old drivers, and a lot of that comes down to placement. WHERE they are in the room can have as big an effect on the frequency response as you'd get by adjusting the bass and treble knobs on your receiver (or the midwoofer & tweeter volume knobs on the backs of the speakers for that matter).
I forgot to post the brochure before.
![]()
Hi GT,
Getting the mids/high array out was a little bit of a pain. There are 10 flat head screws that need to be removed to pull out the boardboard. It's alot heavier than I was expecting. Quality little drivers for sure.
I have both pots turned to 3:00 as well. After experimenting that is what sounds right to me. Much lower and upper frequency detail is lost. Any higher and it gets fatiguing. I'm not sure if the pot is for mids or woofers. Once I recap them it may become more apparent.
Did it feel like it was wedged in there, or did it slide out easily-enough once all the screws are removed? I've talked to a few people about this, but I never did it myself, so I'm trying to get an idea of what to expect if I ever have to do it.
Yeah, that driver panel must be heavy. Just the magnet structures alone on each Super 3 tweeter are 4lbs apiece, so you can bet that panel probably weighs like 20lbs or more. Those drivers are heavy. Cast-frame construction throughout.
I found that I get the best sound when there's a clear line of sight between me and the drivers, woofers included, and I keep the floor area uncluttered, as even low objects can affect the woofer dispersion. The W90's have a lot of potential, as you're sure to discover over the next couple years (Those aren't going anywhere for a while... I've seen this movie before, so I know how it plays out).
Really the only issues I encountered were related to removing the screws. They have a small flathead and on one speaker they were not lined up perfectly. Getting the top center screw out was a small chore.
Once the screws are removed I was able to lift out the panel relatively easily. It was not wedged in nor adhered to the cabinet.
I would definitely take a look at them at least once. Pretty neat thing to do.
I will absolutely snap you a pic of the full array when I open them back up to recap.
I'm glad you know how this movie ends even though I'm not really in any rush to get to the end of it. I'm enjoying all of it right now!
EDIT: Thanks a million for posting those ads. I couldn't sleep last night so I spent the better part of the night reading the ads and the old high fidelity W90 review. Great stuff.
Don't look like foam to me.
What Drugolf said. Those surrounds look like doped fabric. Wharfedale seems to have used both kinds of rolled fabric surrounds on those 12" drivers: treated and plain.