• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

Went ahead and recapped my W60's with the Jantzen's and to my surprise they sound fantastic! So I guess it just depends on the type of poly.

Still planning on putting in the PIO's when they get here, but in the meantime I'm extremely satisfied. These are great speakers.
 
Went ahead and recapped my W60's with the Jantzen's and to my surprise they sound fantastic! So I guess it just depends on the type of poly.

Still planning on putting in the PIO's when they get here, but in the meantime I'm extremely satisfied. These are great speakers.

Where did you get your PIO caps, enquiring minds want to know!
 
Went ahead and recapped my W60's with the Jantzen's and to my surprise they sound fantastic! So I guess it just depends on the type of poly.

Still planning on putting in the PIO's when they get here, but in the meantime I'm extremely satisfied. These are great speakers.
I'm glad you went ahead and did that. Perhaps those alnico Wharfie tweeters just hate the usual Dayton and Solen suspects. Sometime I'll have to try a few rounds of cap-rolling (Mine have those quick disconnects I showed you, so swapping caps in and out would not be that difficult, plus you can even leave that upper rear panel open on the W90's without it really affecting the sound, mainly because the mids and tweeters are free-air-mounted to a wooden crossbeam that also isolates those drivers from that upper-rear compartment, so leaving the upper-rear panel off/open is negligible at best).

I should ask Crestwood23 which W90's he felt sounded better, his pair with vintage oil caps or the pair that his friend has with the Mundorf oils (I seem to recall them being the Silver & oil ones, but I'm not 100% fa' shizzle on that.
 
Last edited:
finished the restore work and custom build on stands for the W70's I picked up a while back... replaced the old caps with Sangamo Paper In Oil caps, old caps were reading 25% out of spec... still have to move them up to the house and hook 'em up when I pull my KEF's out for recap work...View attachment 629196

index.php


Those look sweet... Those alnico Super 3's (which I assume those W70's have, judging by the baffle) definitely like the Sangamo oils. My W90's and Crestwood23's W90's both have those, so get ready to say hello to sweet horn instrument sounds. :D

I'm amazed that those original caps were only 25% off spec. Were they oil caps or just the typical metal can electrolytic ones that I see in most Wharfedales from the '60's? There WERE a few W70's that came factory-equipped with British oils, but only the earliest ones from like '60-'61. The rest have those early electrolytic-type ones.

Be precise with the placement. It's worth the effort. Once you hear them really start goin' all seamless and 3D-sounding, that's when you know you're getting close, but it's a very-small margin of error, so keep at it until you really get them locked in.

What kind of amp/receiver are you planning to run?
 
Last edited:
I'm glad you went ahead and did that. Perhaps those alnico Wharfie tweeters just hate the usual Dayton and Solen suspects. Sometime I'll have to try a few rounds of cap-rolling (Mine have those quick disconnects I showed you, so swapping caps in and out would not be that difficult, plus you can even leave that upper rear panel open on the W90's without it really affecting the sound, mainly because the mids and tweeters are free-air-mounted to a wooden crossbeam that also isolates those drivers from that upper-rear compartment, so leaving the upper-rear panel off/open is negligible at best).

I should ask Crestwood23 which W90's he felt sounded better, his pair with vintage oil caps or the pair that his friend has with the Mundorf oils (I seem to recall them being the Silver & oil ones, but I'm not 100% fa' shizzle on that.

I've never opened up the tweeter boxes so I don't know for sure that my W60's have alnico tweeters. Only 1 of my woofers are alnico(designated by the red border). Also, ultimately what I hear from my speakers in my room with my amp with my ears could be something pleasing to me while someone else might hear it as not. Subjectivity, the cornerstone of this great hobby. So who knows?
 
If that one W60 has an alnico woofer, it would, by factory standards, also have an alnico tweeter. The one with the ceramic woofer is probably an early W60B with a ceramic tweeter. It COULD have an alnico tweeter, but probably not. If it does, then it's one of those transition models where they had just started slipping ceramic woofers in the W*0 models but hadn't yet begun adding the updated tweeter yet (I'm talking late '63 to early '64, just before the '64 catalog was introduced... That's the logical point where any transition-type W60's, W70's, and W90's would likely have been made... Crestwood23's W90's are an example of this... Ceramic woofers, but alnico mids and tweeters up top).
 
If that one W60 has an alnico woofer, it would, by factory standards, also have an alnico tweeter. The one with the ceramic woofer is probably an early W60B with a ceramic tweeter. It COULD have an alnico tweeter, but probably not. If it does, then it's one of those transition models where they had just started slipping ceramic woofers in the W*0 models but hadn't yet begun adding the updated tweeter yet (I'm talking late '63 to early '64, just before the '64 catalog was introduced... That's the logical point where any transition-type W60's, W70's, and W90's would likely have been made... Crestwood23's W90's are an example of this... Ceramic woofers, but alnico mids and tweeters up top).

Would it be possible that the early W60B would have a sticker in the back that id it as a "W60"?
 
index.php


Those look sweet... Those alnico Super 3's (which I assume those W70's have, judging by the baffle) definitely like the Sangamo oils. My W90's and Crestwood23's W90's both have those, so get ready to say hello to sweet horn instrument sounds. :D

I'm amazed that those original caps were only 25% off spec. Were they oil caps or just the typical metal can electrolytic ones that I see in most Wharfedales from the '60's? There WERE a few W70's that came factory-equipped with British oils, but only the earliest ones from like '60-'61. The rest have those early electrolytic-type ones.

Be precise with the placement. It's worth the effort. Once you hear them really start goin' all seamless and 3D-sounding, that's when you know you're getting close, but it's a very-small margin of error, so keep at it until you really get them locked in.

What kind of amp/receiver are you planning to run?

yeah GT, the caps were the metal can electrolytic type... right now running a CJ PV-12 preamp with a SS B&K ST2140 amp... eventually plan on moving to a tube amp, but need something with enough juice to drive the KEF 105.1's... the KEF's are power hungry at only 86 dB and I'm not sure if a vintage Fisher would be enough for them... maybe something with KT-120 power tubes like the Rogue Audio Atlas Magnum, dunno.
 
Would it be possible that the early W60B would have a sticker in the back that id it as a "W60"?
As far as I have seen, yes. I have seen W70B's that actually said "W70B" on that little backplate. But the gold sticker part doesn't always survive 50+ years, so it may still be a W70B and not say it on the back. Now, the W60 is a little more-complicated than that (and it's good that you brought this up too, 'cause their model/series naming practices got even weirder than any driver/magnet discrepancies).

Though there clearly was a Wharfedale W*0 series in 1964, different from those original W40/W60/W70/W90 models (There was also a W50 model as well), most of that second series (the second era of the W*0 series if you will) is not clearly-labeled as such. You will see lots of ported W60's and W90's from the same catalog year/s as the W70B that will simply say W60 or W90 on the back. But I don't think I've ever actually seen ANY "W90B-era" (for the sake of argument) W90's that actually SAY W90B on the back. However (and this is where it gets tricky), there ARE clearly-labeled W60C and W90C models, plus there are other W*0C models as well, so those second variation W60 and W90 models basically get the W*0B moniker, even though some/most are not technically-labeled as such. Besides, how can you have a W*0C series without there ever being a W*0B series? Even if it's not official completely-across the board in that series, it's really kind of necessary to give them all that label, otherwise it's confusing as hell. You COULD call them W60 MKII's or W90MKII's, but that would create even more confusion since the W70D HAS a MKII designation to describe the second variation of that particular model.

It's madness, isn't it?

Playing Muddy Waters' "Electric Mud" album through the W90NOTB's ( :D ) while I have breakfast. It's funny how the critics despised this album back in 1968 when it came out, but this is groundbreaking stuff. It's like psychedelic blues-funk, and thankfully, Muddy, who at the time was in his later years and was trying to update his image and sound, did not rest on his laurels and simply phone this one in, not in the least. He really gave it his all, and it shows. Ella Fitzgerald tried a similar approach in her later years, moving away from her jazz roots and exploring more-mainstream music styles, and considering her age at the time, she did a pretty-good job with it (She did a version of the Rare Earth hit "Get Ready" that ain't bad at all). But anyway, I'm rambling. This "Electric Mud" album is great though. It has that tube-recorded/mixed sound that really-shines through the old Wharfedales. Lots of fuzzed-out guitars and wah-pedal stuff.
 
Last edited:
Moved my W90's back about a foot or so, as I had been wanting to for quite a while (W90's weigh 125lbs apiece and I have them on stands, so it's not a simple thing, but I'm glad I finally went ahead and did it instead of talking about it... You can only stare at something for so long before you finally say **** it and get it done... The curse of obsessive procrastination).

Just as I had suspected, the bass response improved. Sounds tighter and deeper now, which also helped clean up the entire image. It already sounds great, and I haven't even done the measuring yet. Just eye'd them and tried to push both back equally, so I should get more improvements later. I just wanted to sample them for a little... I might push them back even a little more... They were pretty far out into the room... I may push them back a little farther and then I'll worry about final measurements).

Okay, I now have the measurements pretty-close. Big difference. I figured they needed some distance. I had been giving a little boost on the Fisher 800C's bass knob, but now I have the bass set at 12:00, and it's BETTER than it used to be with the boost. And not just the bass either. EVERYTHING is better. Also, I can turn them up just a little more with the speakers a little farther away. Very-nice all around.
 
Last edited:
I was curious if anyone has "refoamed" any super 3s or 5s. The flat "felt looking" foam is what I am inquiring about. Is the material used still available or does anyone have a suggestion as an alternative? The surrounds on mine have begun to disintegrate (they have holes), however, they actually still sound really nice (at low levels of course)! Thanks!
 
so, I grabbed one of my old ss receivers and hooked up the W70's... one speaker nothing from the tweeter, the other speaker nothing from the bass and mid... going to have to pull all the drivers to check them out... figured I would rewire everything so I could at least lay the back panel down behind the speaker to make any such work easier... wondering what the proper gauge wire I should be using and should I go with stranded or solid single conductor hookup wire... thanks in advance.

messed around a bit more and when turning the potentiometer I do hear some of the drivers scratching and cutting in and out, not very audible... should the pots be replaced, can they be cleaned with good results?
 
Last edited:
I was curious if anyone has "refoamed" any super 3s or 5s. The flat "felt looking" foam is what I am inquiring about. Is the material used still available or does anyone have a suggestion as an alternative? The surrounds on mine have begun to disintegrate (they have holes), however, they actually still sound really nice (at low levels of course)! Thanks!
I did, see this thread. http://www.audiokarma.org/forums/index.php?threads/warfdale-id-and-info-wanted-please.534554/
My surrounds were originally some sort of foam so I cut some acoustic foam I had laying around and made my own. It seamed to work well.
 
I did, see this thread. http://www.audiokarma.org/forums/index.php?threads/warfdale-id-and-info-wanted-please.534554/
My surrounds were originally some sort of foam so I cut some acoustic foam I had laying around and made my own. It seamed to work well.
One thing to remember about the Super 3 and Super 5, the cone doesn't really travel in and out the way a woofer does, so felt is fine, and so is an open-cell foam.

The factory foam surrounds that Wharfedale used in the '50's might have been something called "isocyanate". That's what I got from one of the older AK members, although Gilbert Briggs simply referred to it as "a mixture of felt and foam". I'd be interested to know for sure if modern-type foam surrounds have the right characteristics for those '50's Wharfedale woofers and large midwoofers to accommodate them, but with the Super 3, Super 5, and other 3" and 5" drivers from that era, I think either the thick felt or open-cell foam would be just fine, since those drivers don't have to worry about any real excursion.
 
so, I grabbed one of my old ss receivers and hooked up the W70's... one speaker nothing from the tweeter, the other speaker nothing from the bass and mid... going to have to pull all the drivers to check them out... figured I would rewire everything so I could at least lay the back panel down behind the speaker to make any such work easier... wondering what the proper gauge wire I should be using and should I go with stranded or solid single conductor hookup wire... thanks in advance.

messed around a bit more and when turning the potentiometer I do hear some of the drivers scratching and cutting in and out, not very audible... should the pots be replaced, can they be cleaned with good results?
Try cleaning them first. Deoxit, and maybe the stuff they use to clean jewelry. I forget the name. When those pots get dirty, drivers start cutting in and out. Happens with my W90's. If you are able to handle taking the pots apart, check out the parts inside and see how corroded they are. I believe Dr. Biggles posted a thread (or a few posts WITHIN one of his threads) about cleaning/polishing the parts inside the pots, so you might want to look for those. He has a pair or two of the W70's.

And I didn't use stranded wire in my W90's when I recapped them. Just the single wire that you can bend to shape in whatever direction. Mine was thick enough to do that, but not stranded.
 
I did, see this thread. http://www.audiokarma.org/forums/index.php?threads/warfdale-id-and-info-wanted-please.534554/
My surrounds were originally some sort of foam so I cut some acoustic foam I had laying around and made my own. It seamed to work well.
Wow! Thanks for the info Tyeeslayer and Gang-twanger! I try to search these things out before posting, but I missed that one. It seems only fitting the magic and mysteries of Wharfedale is inherent right down to the foam used in their tweeters and mids!
 
Hey everyone. Really happy to say I'm about to join the Wharfedale W90 club. Should be arriving tomorrow. Being delivered to my door from an awesome, amazing AKer.

They are these: http://www.audiokarma.org/forums/in...l-90-speakers-3-way-w-alnico-reds-499.684216/

They are going to be replacing my cornwalls which sound really good but my listening room is too small to get the best of them. I'll be listening to 60s and 70s classic rock, prog rock, jazz, classical and funk with some newer music like Dave Matthews Band and even some daft punk. I have a thorens TD-165 with a Shure M91ed and SAS stylus. Right now I have an HK730 but within the next couple of weeks my Scott 299b should be coming home after a full restoration.

If they sound 1/2 as good as Crestwood and Gang-Twanger's W90s i'll be thrilled!

Cheers!!!
 
Hey everyone. Really happy to say I'm about to join the Wharfedale W90 club. Should be arriving tomorrow. Being delivered to my door from an awesome, amazing AKer.

They are these: http://www.audiokarma.org/forums/in...l-90-speakers-3-way-w-alnico-reds-499.684216/

They are going to be replacing my cornwalls which sound really good but my listening room is too small to get the best of them. I'll be listening to 60s and 70s classic rock, prog rock, jazz, classical and funk with some newer music like Dave Matthews Band and even some daft punk. I have a thorens TD-165 with a Shure M91ed and SAS stylus. Right now I have an HK730 but within the next couple of weeks my Scott 299b should be coming home after a full restoration.

If they sound 1/2 as good as Crestwood and Gang-Twanger's W90s i'll be thrilled!

Cheers!!!

Congrats! They were dangerously local to me, great price and appear to be in great condition, I was starting to invent reasons as to why I NEED another pair (hmm STACKED w90's?!?). They will certainly be different from the Cornwalls thats for sure. The w90s will for sure be better in your smaller room, and with that 299b you are definitely in for a real treat.
:music:
 
Back
Top Bottom