• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

Hi GT,

Dunno about W60Bs, but my (early) Canadian W60s have the ceramic mag woofers, and red banded alnico (PST4) tweeters. If I recall, my woofs had an October '63 build date (JFK was still alive). So maybe they're your hypothetical "Bs". Mine had (mostly dead) "Hunts" electrolytic caps, looking like the second cabinet in davidflas's post (#606) above.

Figured we should sort this out now to avoid confusion. This is the typical alnico tweeter from an early W60. The book I have simply refers to this as "a variation on the Super 5", which is the same thing they said about the tweeter in the original W2 model from 1959 (The old Super 5 was originally their TOTL tweeter back in the early '50's prior to the introduction of the Super 3 in 1955... The Super 5 may even have been introduced in 1949 for use in an early version of the 3-way Omni-Directional Corner Speaker, but it's first availability as a loose driver is listed as 1951 as far as the book I have is concerned).
attachment.php


attachment.php


I too recall a few early pairs with ceramic woofers and alnico tweeters. I wasn't sure if this was the W60B or a kind of transition model between the original, all-alnico W60 and the W60B, and considering that Wharfedale in England had to ship drivers (and parts) in large bulk loads to the distributors (where they would basically pick from and install said drivers and parts in cabs THEY built from regionally-sourced wood materials), I figured there must be a few transitionary examples BETWEEN the launch of each new catalog.

I have heard others call it a PST/4, but the PST/4 I see in the book has a thin, white layer of polystyrene on the cone's front surface. The W60 tweeters I've seen do not, so I had to ask if your W60 tweeters DO have the white polystyrene layer (PST stands for polystyrene). Anyway, this is what the PST/4 looks like: http://www.thegreatbear.net/ebay/wharfedale_pst_4/wharfedale_pst_4_pair_above.JPG

And here's a page from the '64 Wharfedale catalog that shows the PST/4: http://audiokit.com.br/das/alto-falantes/wharfedale-manual-original-de-uma-serie-fabulosa.html
 
Last edited:
To further add to the confusion, here is another tweeter I have seen in W60's before. As far as I can tell, this is what the actual Super 5 looks like, but this tweeter was in a W60, so either this was a very-early W60 tweeter, or some flipper substituted an ACTUAL regular Super 5 for a blown W60 tweet. And notice the metal dustcap. The early Super 3 tweeter examples had a metal dustcap as well, but this was eventually eliminated, I think because of the RS/DD-type updates, although I'm not 100% sure on the "why's". I bet the tweeter in the link was just a standard Super 5 chosen by some W60 owner (or flipper) to replace a blown W60 tweet that looked like the upper one in my last post.
http://www.beartrappr.com/test/images/WharfedaleW60_WebPhotos/WharfedaleW60_Tweeter1.JPG

Anyway, I updated a few things in this post and the above post, so you might want to doublecheck them, but this is the extent of what I have seen in the 2-way, ported W60's. Mine have alnico magnets throughout, and I believe the tweeter is the type seen at the top of my first post (the post BEFORE this one). I assume the PST/4 is a 4" driver rather than a 5" like the Super 5, but I need to see what I can dig up in the book I have (The catalog seems to show it as 4 & 3/8"). The Super 5 is a 5" as far as I know. The Super 5, however, is not listed in the 1964 driver catalog, so it was not available as a loose driver at that point (Doesn't mean they weren't using a Super 5 "variant" in the W60 at that point... It just means it wasn't listed as a loose driver by then).

Who the hell knows... I need some chow, goddammit... I'm frigging starving. :D
 
Last edited:
To further add to the confusion, here is another tweeter I have seen in W60's before. As far as I can tell, this is what the actual Super 5 looks like, but this tweeter was in a W60, so either this was a very-early W60 tweeter, or some flipper substituted an ACTUAL regular Super 5 for a blown W60 tweet. ................I assume the PST/4 is a 4" driver rather than a 5" like the Super 5, but I need to see what I can dig up in the book I have.

OK, my W60s have the PST/4, which I understood was simply the regular 4" W60 tweeter, plus a thin layer of styro on the cone. So far as I can tell, the W60 tweet wasn't a Super 5 (or even a true 5"). I understood that the Super 5 had a flange on the side of the basket, and a ginormous gold magnet like the Super 3. Like the one on the right:

attachment.php


Also see, with ceramic magnet:

attachment.php


I know they were in the W90s, but don't know where else they were installed.
 

Attachments

  • Super5.jpg
    Super5.jpg
    7.3 KB · Views: 46
  • Super5cer.jpg
    Super5cer.jpg
    15.8 KB · Views: 45
I'd like to know this too, it's unlikely that 50 year old caps are in full working order, no matter what put they look like.

The only caps from those days that would still hold their value are oil caps, which Wharfedale stopped using around '60-'61. The W60's I've seen have all had that same 12uF metal can electrolytic in them. Kinda' looks like an oil cap, but much too small for that size.
 
OK, my W60s have the PST/4, which I understood was simply the regular 4" W60 tweeter, plus a thin layer of styro on the cone. So far as I can tell, the W60 tweet wasn't a Super 5 (or even a true 5"). I understood that the Super 5 had a flange on the side of the basket, and a ginormous gold magnet like the Super 3. Like the one on the right:

attachment.php


Also see, with ceramic magnet:

attachment.php


I know they were in the W90s, but don't know where else they were installed.

You make an excellent point for sure. I hadn't taken a good look at the Super 5 in a while and figured it was time. So, there WAS a ceramic Super 5. It's not listed in the catalog PDF's I've seen, but I do remember that old Ebay shot you posted that shows that the actual Super is indeed a noticably-more-robust tweeter than what is in the W60's. I'm in New England, and most of the W60 pairs I have seen came with the first example I showed with the red-banded magnet structure and a black cone like the Super 5 has ( but no metal dustcap).

Interesting. Yours, I would imagine, are from the Canadian/British Columbia distributor, right? And mine are from BIC/Wharfedale in Long Island, NY, so maybe they were doing it a bit differently. I have seen tons of BIC/Wharfedale W60's with that first alnico tweet I posted. Same as mine. Weird, huh?

Boy, that Super 5 must be nice. They were used as mids in the W4. I wonder what the various W2's out there are going to have in them. The Wharfedale/Briggs book I have lists it once again as "a variant of the Super 5". He should have written "I do not know". :rolleyes:

I'll post my W90 mids in a second. They are a lttle different, but close.
 
Last edited:
The only caps from those days that would still hold their value are oil caps, which Wharfedale stopped using around '60-'61. The W60's I've seen have all had that same 12uF metal can electrolytic in them. Kinda' looks like an oil cap, but much too small for that size.

Ok then, what about this cap?

IMG_1482 by davidflas, on Flickr

My 6/61 dated W60 has that one

And my other one, which I wasn't able to figure out a date on has this one:

IMG_1491 by davidflas, on Flickr

A much smaller cap.
 
If it helps at all, here's an old picture from when I first got my speakers. The one with the larger cap had it's sticker below the binding posts like this:

DSC_2726 by davidflas, on Flickr

Not sure if that helps with dating it.
 
If it helps at all, here's an old picture from when I first got my speakers. The one with the larger cap had it's sticker below the binding posts like this:

DSC_2726 by davidflas, on Flickr

Not sure if that helps with dating it.

Significantly lower serial then either one of mine, and your other one. Pretty early in the run so maybe that is an oil cap?
 
Sorry, guys... Was looking for something. My pair has the C-battery-sized metal can electrolytics. I'll post a typical oil replacement in a sec. And Sberger, I'll get back to you and Harvey as well. Got a flurry a' stuff goin' on at once here. :D

For PastTech: Here are the early W90 mids, best I can tell by what I've seen in mine. Different magnet structure from the old Super 5's, but the frame perimeter has the same shape, and they still have a big, fat alnico magnet (Mine have the same type of magnet structure and same-sized magnet as these here... Can't tell for sure if the part around the magnet on mine is red or white, looking through the grill with a flashlight, but it looks to be white... It doesn't matter though... Same thing... I've seen two different colors used for the band around the magnet on this driver... Most white, but I have seen pics of this specific driver with a red-banded magnet... Both are still alnico though.
$_57.JPG

DSCF6750_zps50272298.jpg


I've seen early versions of this driver with a red band around the magnet... Everything else was identical, and no gold, enclosed magnet structure like that picture of the Super 5 with the Super 3... Just the magnet structure I posted here, with a red band instead of white... I have not been able to prove 100% that they are the same drivers, and I don't know where they stand in comparison to the Super 5 examples I've seen, but both were much more-robust than the PST/4 or the W60 tweeters I've seen and more in line with the real Super 5's.

Whatever the case, the W60's still have very-nice tweeters. Compare them to their large-bookshelf-sized counterparts, most of which aren't packing that much alnico.
 
Last edited:
Significantly lower serial then either one of mine, and your other one. Pretty early in the run so maybe that is an oil cap?

No, the size is too small. A 12uF oil cap would be bigger than a deck of cards. That's an old metal-can electrolytic as far as I can tell, similar to what came in mine. Possibly a different brand, but I don't remember exactly what brand mine were.

And I saw these W60's on Eek!Bay earlier (http://i.ebayimg.com/00/s/MTI4NFgxNjAw/z/Y24AAOSwHjNWAtj1/$_57.JPG). You can see in the picture that one of the tweeters is like the first W60 tweeter I posted, but it's clear that the other W60 has a tweeter with the metal dustcap (that blue metal one). Now, it's possible that one of these W60's was purchased AFTER the other, as it often happened back in the early days of stereo (They buy the first one for their existing mono setup and then pick up the second when they convert to stereo... Seen that a lot with old W60's and W70's), but it's hard to be certain about anything without information from the original owner.
 
Last edited:
Not to interrupt this informative section on W60's, but here is a quick photo of the PIO caps that GT helped me track down last week for my W70's 4uF each.

pio10.jpg
 
Went ahead an ordered a couple of motor run caps, and a couple of Jantzen cross caps. Neither was very much, so at least I'll get the caps updated in the W60's until some decent oil filled caps come along. Really want to hear these speakers updated since I'm already digging them as is. Looking forward to my first soldering adventure!
 

Modern cheap motor run. Not an oil cap, I don't think, and maybe not even the kind with that waxy stuff inside. Maybe polypropylene-based combined with something else, I really don't know. Made in China most-likely. I would do the modern wax-type ones before that and the true oil ones before the wax ones.

It's complicated, you know?

Just got some free time and switched on the W90's. Whenever I'm looking at/thinking about acquiring another pair of speakers, something different, the W90's eventually pull me back into the fold, reminding me why I enjoy them so much. I like a FUN-sounding speaker, something very-musical and engaging, and that's the W90's all over. Just Fun City. I had a friend over here who I had not had over in several years. He saw the W90's, and he's like, "Whoa, dude... What are THESE?"... I gave him a demonstration, and I think I messed his mind up good. He dug the look too. He had never seen home speakers that big before and said they looked like big studio monitors from the '60's. He recently scored a pair of Vendersteen 2C's, but he hasn't heard them yet. Needs to get some banana clips (He's new to the banana-type connectors... I've never used that type myself, actually... Vandy 2C's are nice though... He'll dig those a lot once they're up and singin').
 
Last edited:
I'm a little scared about recapping my W-60's because as they are right now sounds so good. In theory I get and accept that the caps that are in there now are way out of spec at the very least, but it's amazing that these speakers can still sound so great (to me, anyway). In fact, I have to back off the tweeter control some otherwise they're almost too bright. I should get the Jantzen caps today and I'm excited about hearing these with some new caps in them so I'm going get them in there, but believe me there's some trepidation there.

In the next week I'll have some Russian PIO's coming, so if I don't like the Jantzen's I can look forward to that.

Oh, and such great synergy between the same era Fisher 500B and W60's. Gang-Twanger is completely on the mark with this. Fisher tube receivers and vintage Wharfedales really were made for each other.
 
finished the restore work and custom build on stands for the W70's I picked up a while back... replaced the old caps with Sangamo Paper In Oil caps, old caps were reading 25% out of spec... still have to move them up to the house and hook 'em up when I pull my KEF's out for recap work...W70.jpg
 
Back
Top Bottom