• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

Tweeter at ear level when seated, that's a pretty significant height. Finally found a use for my Sound Dynamics 300Ti. Just wish they were a little taller and wider and they'd be a perfect Wharfedale stand! :beatnik:
 
Greetings fellow Wharfedale freaks!

Just arrived: Wharfedale W25s. Boy they sound magnificent. Handily beat out my previous office bookshelves: University by Altec Miniflex 3A with Mundorf EVO caps. I enjoyed the improvement in sound when I recapped my W60Ds with Mundorf Supremes and my W90Ds with in-spec Klipsch Oil Caps from a Klipschorn; yet I hesitate to open these cabinets up because they look untouched and aren't as easily opened (no obvious entry). Thoughts?

I'm currently driving them with a Stromberg Carlson ASR-433 integrated and Empire 598 II with Shure M97xe. With the loudness contour on, they really sound great.
 

Attachments

  • IMG_6615.JPG
    IMG_6615.JPG
    72.1 KB · Views: 122
Agree with GT's recommendation about getting them higher. Putting my W60's on a pair of AR stands(one of my 3's is presently under the weather, so perfect opportunity to experiment) has done of a nice job of improving the overall soundstage and tonality. They sounded very nice on stands that had them 8" up, but now they're 12". A very positive difference.


0
 
Greetings fellow Wharfedale freaks!

Just arrived: Wharfedale W25s. Boy they sound magnificent. Handily beat out my previous office bookshelves: University by Altec Miniflex 3A with Mundorf EVO caps. I enjoyed the improvement in sound when I recapped my W60Ds with Mundorf Supremes and my W90Ds with in-spec Klipsch Oil Caps from a Klipschorn; yet I hesitate to open these cabinets up because they look untouched and aren't as easily opened (no obvious entry). Thoughts?

I'm currently driving them with a Stromberg Carlson ASR-433 integrated and Empire 598 II with Shure M97xe. With the loudness contour on, they really sound great.

I would bet those are front-access, through the woofer hole. That's how my W60E's are.

Boy, those W*5 models all get raves. It's really-true what I had read about the company's greater commitment to research and development during that '69-'74 period. Lots of sleepers out there from their "all-mid-fi" era. I read where some reviewer said the Dovedale 3 (1969) sounded better than the W3 (1959), especially in the crucial upper-bass/lower-mids frequencies.

What are you using to power your W90D's?
 
Agree with GT's recommendation about getting them higher. Putting my W60's on a pair of AR stands(one of my 3's is presently under the weather, so perfect opportunity to experiment) has done of a nice job of improving the overall soundstage and tonality. They sounded very nice on stands that had them 8" up, but now they're 12". A very positive difference.


0
Height and placement are everything with those, for sure. A great speaker for tube guys (and goils) who like to crank classic-rock. Gilbert Briggs and Raymond Cooke both had their hands in that design.

In 1959, after listening to a bunch of US-made large-bookshelf-type speakers at a meeting with Leonard Carduner (who was co-owner and head of BIC), Gilbert Briggs was convinced that the W3 could not compete in the bass department, and the W60 grew out of that. He wanted a model for the US market that he felt could hold it's own against it's US competitors (I know several of the speakers he auditioned were AR's, plus I believe one or two KLH's as well, among other brands). People in the US, at least in those days, generally preferred more bass in their speakers than people in the UK. Who knows why..

I moved my left speaker about two inches to the left, and I got the ratio very-close. It got better too. Not slide-rule-perfect, but I think it's right on both sides. My soundstage is solid for sure. Nice, strong center and bass-foundation. The W90's, despite having six drivers spread across a very-large, wide baffle, can have a seamless, coherency and cohesiveness that I suspect is not unlike the better FR-type drivers. I knew the W70 was like that, but it's surprising what the W90's can do when they're in the zone. I'm liking this tonight. They sound awesome. It's hard to figure out the Cardas/golden ratio nethod when you're using speakers that you have to toe in. I simply used the center-baffle point for the ratio and disregarded the sides (I put the sides equal distance from my head, and also equal to the other speaker).
 
I would bet those are front-access, through the woofer hole. That's how my W60E's are.

Boy, those W*5 models all get raves. It's really-true what I had read about the company's greater commitment to research and development during that '69-'74 period. Lots of sleepers out there from their "all-mid-fi" era. I read where some reviewer said the Dovedale 3 (1969) sounded better than the W3 (1959), especially in the crucial upper-bass/lower-mids frequencies.

What are you using to power your W90D's?

Thanks for the info, G-T! I'll give it a crack tomorrow. I drive the W90Ds with the same SC ASR-433, because it has 4 ohm taps, unlike the HK A300 and ST35. I've read others (maybe you) suggest the Fisher 400/500/800 C, I almost picked one up to pair with it but got sidetracked by the Dynakit. It sounds good but I have them in my little office (little house is already too crowded) so I can't even get more than about six feet away from them.
 
Thanks for the info, G-T! I'll give it a crack tomorrow. I drive the W90Ds with the same SC ASR-433, because it has 4 ohm taps, unlike the HK A300 and ST35. I've read others (maybe you) suggest the Fisher 400/500/800 C, I almost picked one up to pair with it but got sidetracked by the Dynakit. It sounds good but I have them in my little office (little house is already too crowded) so I can't even get more than about six feet away from them.

I hear that. I had to eliminate a few things in order to put my W90's where they should be (It's a 14x12 room). It did wonders for the focus and coherency though, and it smoothed out the remaining bumps and dips in the response. The bass is noticeably-easier to hear now. It's kinda' like the driver dispersion is a car, and all the roads in town were re-paved.

I'm still trying to decide how I should set up the Denton reissues, which are pretty-small, roughly the size of the KEF LS50. I'm still shopping for an amp for those, so I've got time, but I would love to pair them with a good sub and make it a low-volume system for modern electronic music.
 
Last edited:
index.php


Those look great. So do the amps. Love the table. I always figured those would go well with Wharfedales (My Wharfies always loved vinyl). Those speakers are pretty-low-power, so I get why they're so-tube-friendly. With that placement, you might try sliding them out to the left/right, to the point where they're about to touch the inner sides of the cabinets (the kitchen cabs, not the speaker cabs). There's a little room there to experiment. Not much, but some, so you can see where they sound best. Normally, I wouldn't bother mentioning it when you're talking about such a small area for adjustment, but knowing now just how much difference an inch or two can make, I wanted to bring it up. Plus, it'll add width to the soundstage anyway, so why not. It's tough though because they look so perfect in the center like that. Wharfedale made an awful lot of speaker models designed for horizontal placement, it seems. The W25, W35, W45, W40, W60, and quite a few others. I always liked that.
 
Last edited:
Those look great. So do the amps. Love the table. I always figured those would go well with Wharfedales (My Wharfies always loved vinyl). Those speakers are pretty-low-power, so I get why they're so-tube-friendly. With that placement, you might try sliding them out to the left/right, to the point where they're about to touch the inner sides of the cabinets (the kitchen cabs, not the speaker cabs). There's a little room there to experiment. Not much, but some, so you can see where they sound best. Normally, I wouldn't bother mentioning it when you're talking about such a small area for adjustment, but knowing now just how much difference an inch or two can make, I wanted to bring it up. Plus, it'll add width to the soundstage anyway, so why not. It's tough though because they look so perfect in the center like that. Wharfedale made an awful lot of speaker models designed for horizontal placement, it seems. The W25, W35, W45, W40, W60, and quite a few others. I always liked that.

I'll try pushing them out today! These speakers have little rubber feet in the corners, do you know if that's original? I will also try putting them up on some cheapo spikes I have. I can also rearrange so the speakers are on the counter. There they can be further apart and at ear-level when I sit -- although I am trying to encourage myself to stand more. I'm going to be unloading some gear soon, do you recommend something more affordable than the Fisher tube amps for the W90D? I love SS as much as tubes.
 
I'll try pushing them out today! These speakers have little rubber feet in the corners, do you know if that's original? I will also try putting them up on some cheapo spikes I have. I can also rearrange so the speakers are on the counter. There they can be further apart and at ear-level when I sit -- although I am trying to encourage myself to stand more. I'm going to be unloading some gear soon, do you recommend something more affordable than the Fisher tube amps for the W90D? I love SS as much as tubes.

Hey Dr!!!

Those W25s look great!!! I am sure they sound awesome as well. I would try to start by pushing them as far to the right and left as you can on the shelves. Then if that doesn't give you the sound you are looking for try them up on the counter. My W90s I have on stands with isolation feet. I find they do make a difference in the sound. I would definitely try the cones/spikes to see if it makes a difference.

If you are looking for something more affordable how about something like an H/K 730? I bought mine for about $120 or so on ebay in nice condition a couple of years back. Its a really warm SS receiver. The H/K is what I am currently using with my W90s. Prior to the W90s it was driving my cornwalls and did so admirably. I think its a GREAT SS receiver for sensitive speakers like the W90s.

Yeah, the pictures online don't do them justice. Hand-made, just like the Duelund oil caps (Duelund and Rike are the top two companies making oil caps these days. Duelund, for several years now, has been making them in-house (I think Jensen in Denmark had been manufacturing them initially [to Duelund specs], but now Duelund has it's own facility in Germany... I believe Rike is a fairly-new company, also located in Germany... Supposed to be VERY-nice stuff... I was a mouse-click away from buying a pair of those 8.2uF's, but fate intervened that night... I'm jealous :D ).

Yeah, those alnico 3's are something, huh? When it comes to vintage cone-tweeters, it's hard to think of a better one. I found that mine react extremely-well to tone-knob changes. With my Fisher, I sometimes add a notch of treble to open up the sound at low volumes (The Fishers are voiced well for that), and the Super 3 lets you add as much as you want without losing that natural sound. But I think their biggest strength is their musicality. I've said it a million times, but I can't envision old Stones albums through any other tweeter. The Super 3 gets out of the way of the music, and yet it flaunts it's personality. Or better yet, the Super 3 does an amazing job of conveying the EMOTION of the music (You want emotion? Put on "You Can't Always Get What You Want" or the Temptations' "Psychedelic Shack" through the W90's at a good volume... You'll be emoting all over the place... Try Roy Ayers' "Love Will Bring Us Back Together"... That'll get you twerking in the middle of the room, right there in front of everybody... And for classical music, try Penderecki' "Polymorphia" or any of his pieces that were used in "The Shining"... Downright-freaky).

I have mine VERY-close to the golden ratio placement that George Cardas recommends. It's complicated when you're already dealing with a furnished room. The right speaker is perfect. Right where it should be, The left one is close. It's only off by two inches at best (Still the right distance from me though, and aimed straight at my head, measured from both sides of the baffle... It just needs to go an inch or two to the left, and maybe a fraction of an inch towards me after that), and I plan to sort that out, but I can't figure out exactly how far left and forward it needs to go to put it at the right ratio AND the same distance from me as the other speaker. I'm a fairly-intelligent guy, but algebra, calculus, etc. were never my strong points. Originally, I thought it was at least four inches off, but now I see that it's only a difference of one or two, so I'm leaving it where it is until I know for sure. That placement is no joke though. Emphasis on coherency and linearity, and that includes the bass, which is tighter, more-coherent, and seems to extend lower.

I'd love to hear more about the Rikes for sure, especially with you having the same version tweeters I do... Cmon, man... We need details.

You're gonna' be knee-deep in those speakers for at least the next six months to a year. I know that addiction. You hit the nail on the head there. You scored a nice pair though. They were made with all alnico drivers and dual sand-filled rear panels for only about a year, MAYBE 14 months at best, so they don't show up often. I love those alnico W12's. They sound good on their own, with the mids and tweets dialed completely-out.

I will definitely provide more subjective information about how the Rikes sound. I just need to spend more time with them. So far I've only listened for 30 minutes. Enough to most assuredly state there is a massive improvement over the original 53 year old caps. I will have much more listening time over the weekend and will share my thoughts with everyone for sure.

Also, a package came in the mail today. I noticed when I first got the W90s setup, one of the woofers wasn't moving. I opened the back and touched the cone and it immediately started playing. It hasn't "gone off" since, HOWEVER, a couple of weeks back I opened up the woofer compartments to inspect the woofers and to rotate them 180 degrees. On this particular woofer i realized that it has a rubbing voice coil. Its very minor, but it is there. Truly I can't be sure it has impacted the sound from the woofer but I'm OCD about this stuff and want the speakers to be perfect functioning as well as good looking. So I found a pair of 2 Alnico W12 woofers pulled from W60s. They were manufactured in 11/1960 making them exactly 2 years older than my currently installed woofers. My intention is to pull the woofer with the voice coil rub and see if I can fix it. Ultimately I would like to have it working again and the blown Super 3 tweeters repaired as well. Having spare parts around is NEVER a bad thing!!!

Below are some pictures of them right after unpacking. By the way I tested them with my DMM and both are reading 5.5 Ohms.













 
Can someone post or make a diagram of the ideal listening position for the W90s? I'm not sure what point on the cabinet you use to measure, and tips on toe-in versus straight-line positioning? Thanks guys!
 
Oh and look what's on its way to Blackstone, MA and being delivered on Monday! Truly better than Christmas!!!!!:yikes::banana::banana::banana:

Now I will have the opportunity to see what sounds better with the W90s. A restored HH Scott 299b or a Fisher KX-200. It better be the Scott I tell ya (for the money put into it) as the Fisher isn't restored though is in really really great condition. The W90s get first dibs on the amps while the Cornwalls get sloppy seconds. ;)

Here are some pics from the seller:







 
Can someone post or make a diagram of the ideal listening position for the W90s? I'm not sure what point on the cabinet you use to measure, and tips on toe-in versus straight-line positioning? Thanks guys!

The best program in the world is Techsmiths Snag-It! I will mock up a picture of my W90s and show you were I measure from. Give me 2 minutes!
 
As promised here is a mocked up photo of my measuring technique. Works wonders!!! Having the W90s on stands makes it easy to move them around. Also, once I get the positioned dialed in I mark the front legs positions with painters tape on the floor. That way when I move them around I can compare the sound to a "home base".

PS. It's supposed to say either "All Distance are equal" or "All distances are the same". Definitely NOT "All distances are the equal" oh well ;)

 
Now I will have the opportunity to see what sounds better with the W90s
My $$ is on the Scott. From the research Ive done they are superior in others' minds. Plus, I am waiting on my 222D to come back from the tech so I can share in your bliss.
 
Brad, you are the man! thanks! that makes so much sense visually. Just to be sure, is the distance between the two speakers the same as well?

No, they are not. I just measured them to be certain. My speakers are placed about 7 feet 2 inches from each other while measuring from the center of each speaker. They are about 8 1/2 feet from my listening position. My room is a tad under 12 x 12 (maybe 12 x 11 1/2).

In regards to the distance apart I find the BEST way to start is to bring them closer together until the center image is perfect. Focus on vocals for this. The vocals should be crystal clear and directly in front of you in the center of the speakers. The soundstage will most likely seem narrower than you would like. At this point I start pushing them apart until the soundstage opens up while the stereo imaging stays focused.

Try this, you will understand what I mean pretty quickly.
 
My $$ is on the Scott. From the research Ive done they are superior in others' minds. Plus, I am waiting on my 222D to come back from the tech so I can share in your bliss.

I really hope your right. It will end up being about double the cost, but that includes getting the matching Scott 370 tuner restored as well. Gonna make a nice set. I bought them together for about 200 back in 2012 and haven't listened to them yet. Super stoked to be getting them back and really, really, REALLY hoping its this weekend!!!
 
Tweeter at ear level when seated, that's a pretty significant height. Finally found a use for my Sound Dynamics 300Ti. Just wish they were a little taller and wider and they'd be a perfect Wharfedale stand! :beatnik:

Hey El Cavano, You can also put a small riser on the front of the stand to angle the speakers up some. This will direct the tweeters up higher towards your ear level while allowing you to use a shorter stand.

When I built my stands I added a 1 x 2 board to the top of the front of the stands so they wouldn't have to be as tall.
 
I'll try pushing them out today! These speakers have little rubber feet in the corners, do you know if that's original? I will also try putting them up on some cheapo spikes I have. I can also rearrange so the speakers are on the counter. There they can be further apart and at ear-level when I sit -- although I am trying to encourage myself to stand more. I'm going to be unloading some gear soon, do you recommend something more affordable than the Fisher tube amps for the W90D? I love SS as much as tubes.

Experiment with them. Wharfedales are weird like that. They have a surprising amount of depth, but they make you work for it a little, which is a good thing, I think. And this true for all their box-type, direct-radiating models, from the W2 and W60 on up to the W60E and others from the early '70's. In my experience, they like being pointing at your head. If that requires toe-in, so be it, but the point is to have the drivers aimed right at your ears, whether it requires a lot of toe-in or barely any at all.

Yours is a unique situation (I'm talking about the W25's here). With that small room, if you have to put them in the little cubby holes where they are, it limits a few things, soundstage-width most of all. So, if that's the case, then I would put them as far apart as you can without actually having the speaker sides touch the inside of the cubby hole. But if you can put them on stands (or whatever) OUTSIDE the cubby spaces, I think the soundstage-width benefits outweigh the negative effects of having them a little closer. But if you leave them in the holes, just be sure to have the baffles far enough forward so the sound can spread out diagonally (If the speakers are set too far back inside the hole, you wind up with the sound dispersing straight out, but not to the left and right like it should).

For the W90's (and this should apply to the W90D's as well), the best thing seems to be golden ratio placement WITH toe-in (Just make your golden ratio measurements from (and in reference to) the center of the baffle and disregard the sides of the baffle until you have to deal with toe-in. Go on the Cardas website, find the golden ratio placement link, choose your room-type, and follow the instructions. I chose the Horizontal/Square Room link, since the front and rear walls are two feet longer than the sides. I think the ratio is different for each/some room types, but I think mine was 1 to 1.618. The ratio has to do with the speaker's location in regards to the rear (1) and side (1.618) walls. So, if you had your speaker a foot from the rear wall, you would want it to be 1.618 feet from the side wall. And if you wanted to put it 3 feet out (or whatever), you would just multiply 3 by 1.618 (or whatever the ratio is for your type of room).

I knew I should have paid more attention in algebra. It works though. At this point, I'm getting as good or better a soundstage and imaging than I do from my Grado RSII headphones (which run about $500US street price), plus the W90's are more-3D-sounding, and the soundstage doesn't have that L/R thing the way headphones do. And this is with modern electronic music too, which is saying an awful lot for a pair of 52 year old speakers with cone-tweeters. Until I locked in that placement, I thought my RSII's had a tighter, much faster bass. But now, they're not that different, the biggest surprise being the low-bass performance. I know for a fact that the RSII extends much lower than the W90, but I'll be damned if I can hear it. In fact, I PREFERRED the low-bass I was hearing from the W90's. It's weird. And the thing is, I really like the RSII's a lot. They're great headphones, no question. But that's the whole point, I guess. The W90's are good enough to beat them at their own game.

I think the leaves everywhere are affecting my allergies. I've been stuffy all week, my head pounding and all that. Definitely been feeling it.
 
Last edited:
Back
Top Bottom