• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

If it sounds as good as it does on my Fisher 400/W60 combo, I can only imagine how great Alan Toussaint's(RIP) fantastic "The Bright Mississippi" lp would sound through the W90's. Super warm mastering, just luscious. Bet ya early Ry Cooder would also sound super.

Sunday thoughts...

I bet the 400 and the W60's make a really-nice combo. They're only rated for 30wpc, whereas the W90 is rated for 40wpc, so the 400 could very-well be a better fit in an average-sized room. Back in the day, it was common to pair the alnico W60's with 18-20wpc amps. People who bought W90's would have paired them with something like the 500C or 800C. The W60 is super-sensitive. A wonderful speaker for horn instruments, same as the W90.

Along with the usual Wharfie-friendly music ('60's and early '70's, W90's like wide mixes that really show off the dual tweeters, especially the outer-left (on the left speaker) and outer-right (right speaker) tweeters. The dual woofers add a lot too. The W90 doesn't have the rock-bottom bass-extension of a speaker like the IMF RSPM (which has incredible extension), but it does have that 'big speaker' bass and dynamics. With two cast-framed 12" woofers in subdivided enclosures with sand-filled rear panels (both of those woofers being true, moving-magnet drivers and not those bass-radiator-type drone woofers), it would be inexcusable if they DIDN'T have that dual-woofer punch and dynamics. The bass response is tighter and better-controlled compared to the W60. They can't do Klipschorn-style low-bass acrobatics, but the W90 DOES NOT need a sub.

But it's not just the extra woofer. The dual-mid/dual-tweeter array does some amazing things. I say this a lot, but the Temptations' "Psychedelic Shack", which is a wide, airy, well-mixed recording, that's a perfect example of the kind of sound that really sets the W90's off. And those old RCA Living Jazz and Living Strings LP's are especially-good. Old Dr. John stuff from the early to mid '70's is also noticeably-W90-friendly. Part of it is the clavinet. W90's love clavinets. Plus, you have the Hammond organ, the funky drums & bass, and the fat-sounding horn instruments like the baritone sax (Anybody who truly-appreciates the baritone sax definitely owes it to his or herself to try a pair of W90's... They own that instrument... Fans of Gerry Mulligan and Doc Kupka take heed... I listen to the Mulligan/Baker Carnegie Hall concert, quite a bit as well as lots of Tower Of Power).

By the way, for those who've PM'd me recently, I apologize. Got some problems on my end.
 
Last edited:
This weekend put my Heathkit W-5 mono blocks back in the mix with the 60's. Now that really is a match made in audio heaven. 25 push pull watts combined with a Dynaco Pas 3 pre(Van Alstine modded) singing through the 60's. The W-5's are from the late 50's, so tons of synergy flowing through them drivers. This is a combo I could really live with for a long time.
 
index.php

hey guys, which cap is the tweeter cap? I am hoping its obvious to someone here because I find it tricky to figure it out by tracing its leads, plus the pots on the back aren't labeled. Thanks!
 
hey guys, which cap is the tweeter cap? I am hoping its obvious to someone here because I find it tricky to figure it out by tracing its leads, plus the pots on the back aren't labeled. Thanks!

It's been a while since I've been inside mine but, I would think it's the cap with the smaller value. Blocks more low frequencies, only allows higher ones through. That will tell you which L-pad is which too (so you can mark'em on the back of the cabinet. ; )
 
I would think it's the cap with the smaller value

Absolutely true, yet unfortunately both of these caps are 25uf instead of the proper 24uf for mids / 8uf for tweets. Appears to have come from the factory this way as I bought these W90s from the original owner.
 
That was a great tutorial GT re. what music the W90's like. Looks like I will have to find me a 500 or 800. (Have always wanted one of them anyway)
Good luck Joel on finding out which one is which.
 
This weekend put my Heathkit W-5 mono blocks back in the mix with the 60's. Now that really is a match made in audio heaven. 25 push pull watts combined with a Dynaco Pas 3 pre(Van Alstine modded) singing through the 60's. The W-5's are from the late 50's, so tons of synergy flowing through them drivers. This is a combo I could really live with for a long time.
Really? ... Hmmm..... I'm looking for something that's a step up from the Fisher 800C pre section... Taking my time though... I want to do it right. Money tight and all. I might try rolling some Russian 2% caps in there. Not sure. I get shopping ADD sometimes. Need to stay focused.
 
Absolutely true, yet unfortunately both of these caps are 25uf instead of the proper 24uf for mids / 8uf for tweets. Appears to have come from the factory this way as I bought these W90s from the original owner.
I don't think the cap values ever changed on the W90. Isn't the W90D even the same? With 24uF's on the midwoofer pairs?

Two 25's is weird. For all the highboy W90's I've seen, it's been 24uF (mids) and 8uF (tweeters). Check the wiring tree inside the upper-compartment. I mean the one on the back side of the mid/tweeter panel? I remember it being labeled as to which wire goes where, at least on some W90's. See if yours is labeled too. You can trace the tweeter wires from that if it is (Bce22 has a picture of his, I think... And with that mid/tweeter arrangement being the same as in yours, I would think that they would put the wires through the back in that same order, only reversed because you're viewing it from the back).

And those are W90C's, right? I would recommend grabbing a pair of 8uF oil caps and hooking them up to the tweeters to see if there's a monumental change in SQ. If yes, then from there you can worry about whether or not to change out the 25uF's on the mids.
 
Last edited:
Really? ... Hmmm..... I'm looking for something that's a step up from the Fisher 800C pre section... Taking my time though... I want to do it right. Money tight and all. I might try rolling some Russian 2% caps in there. Not sure. I get shopping ADD sometimes. Need to stay focused.

If you're not getting what you want from the 800C I would take the easiest step and roll some tubes. That pre section once rebuilt(which I believe yours is) is killer, and can easily be modded for personal taste with different 12AX7's. I did that with all my Fishers(4 of them so far) and it's one of the reasons I love Fisher receivers/integrated's. You can really tailor the sound.

Of course, I'm pretty sure you already know this:)
 
That was a great tutorial GT re. what music the W90's like. Looks like I will have to find me a 500 or 800. (Have always wanted one of them anyway)
Good luck Joel on finding out which one is which.

Thanks. You'll find that certain bands/artists stick out. Hendrix, Stones and Zeppelin stuff on vinyl for example. But don't be afraid to scour the limits of your music collection. Tito Puente's big album from the late '50's is great. Can't remember the name, but it was huge back then. Oh, "Dance Mania Vol. 1". That's it. Latin percussion really sets off those midwoofers.

I also like the old Lalo Schifrin theme music (He did "Mission Impossible", "Bullitt", "Dirty Harry", "Magnum Force", "Starsky & Hutch", etc... Sometimes you find magic in the strangest of places). I love Isaac Hayes' movie soundtrack work, stuff like "Shaft", "Truck Turner", "Tough Guys", etc., plus all the other great soundtrack stuff from that period by Curtis Mayfield, Bobby Womack, Willie Hutch, Donny Hathaway, Herbie Hancock, Bill Withers, Roy Ayers, etc. That's all W90 material (The W90's may have British drivers, but they were designed for the US... Assembled in NYC, at least those that were sold in the states... Not on 110th Street though... Port Washington, over on Long Island :D ).
 
Last edited:
Mystery solved, I went ahead and removed the stops so I could take the mid tweeter array out and trace the leads. You guessed it, the wiring panel on the back of it wasn't labeled. I honestly don't see any reason to keep the 25uf on the mids so I'll be swapping them out for 24uf and and grab some of those huge, but cost effective 8uf kbg PIO caps for tweets. Or a total of 4 of them per cabinet.
 
GT, if w90c means ceramic speakers then yes this pair is that from June 1965. Amazingly only 1 month off in parts from the July 1965 radio people pair I acquired first!

I still haven't listened to my W40s. I finally opened them and can tell you they are 2 way with port. No date stamp anywhere.

Anyone know where to source felt surrounds? They are crumbling on these old tweets.
 
If you're not getting what you want from the 800C I would take the easiest step and roll some tubes. That pre section once rebuilt(which I believe yours is) is killer, and can easily be modded for personal taste with different 12AX7's. I did that with all my Fishers(4 of them so far) and it's one of the reasons I love Fisher receivers/integrated's. You can really tailor the sound.

Of course, I'm pretty sure you already know this:)

I do, but good point. Right now, I have RCA's in all but one of the inputs, plus a GE in the last, but I think the RCA's occupy the AUX and phono spots, which I mainly use. Maybe I can try a Westinghouse or some other warmish tube. I already have WH 7591's in the power section, so no point in changing those. Basically the best 7591 ever made, which makes sense (They invented the 7591, I think). But I can always tweak the AUX section. I think what it's time for is a new DAC. My system has outgrown it, I think, although I give it credit for taking my system as far as it has. I've owned that thing for like 4 years. I want a few things though. I want SFB's, E90's, a preamp/power amp combo that is a clear step up from my 800C, a full refurb for my Akai 1710W reel-to-reel, some stands for my Denton reissues, an AMP for my Denton reissues, and let's see, maybe a relube for a couple of Dual idler-drive tables I have (Those are a perfect match for W90's... 1019, 1219, 1229, etc.).
 
Thanks. You'll find that certain bands/artists stick out. Hendrix, Stones and Zeppelin stuff on vinyl for example. But don't be afraid to scour the limits of your music collection. Tito Puente's big album from the late '50's is great. Can't remember the name, but it was huge back then. Oh, "Dance Mania Vol. 1". That's it. Latin percussion really sets off those midwoofers.

I also like the old Lalo Schifrin theme music (He did "Mission Impossible", "Bullitt", "Dirty Harry", "Magnum Force", "Starsky & Hutch", etc... Sometimes you find magic in the strangest of places). I love Isaac Hayes' movie soundtrack work, stuff like "Shaft", "Truck Turner", "Tough Guys", etc., plus all the other great soundtrack stuff from that period by Curtis Mayfield, Bobby Womack, Willie Hutch, Donny Hathaway, Herbie Hancock, Bill Withers, Roy Ayers, etc. That's all W90 material (The W90's may have British drivers, but they were designed for the US... Assembled in NYC, at least those that were sold in the states... Not on 110th Street though... Port Washington, over on Long Island :D ).
I also really like Lalo Schfrin. Enter the Dragon is one of my fav's but all those others you mentioned are great as well. Can't wait to try your suggestions. Thanks.
 
GT, if w90c means ceramic speakers then yes this pair is that from June 1965. Amazingly only 1 month off in parts from the July 1965 radio people pair I acquired first!

I still haven't listened to my W40s. I finally opened them and can tell you they are 2 way with port. No date stamp anywhere.

Anyone know where to source felt surrounds? They are crumbling on these old tweets.

In the W40's? Or the W90's? Or both?

The W90's have woolen surrounds. The W60's too, I think. That cone has no real excursion of sorts, so standard thick felt ones will do fine. I don't know the thickness, but I know people have bought replacement felt ones before. I think there's a guy on Fleabay that does, but I don't know his name (One of the other Wharfedale/W90 owners must know... I've seen mention several times of the Fleabay seller who supposedly has them, but I'm drawing a blank on the name.

And there's one or maybe two AK'ers that sell every surround under the sun. I haven't tackled the refoam hurdle yet, so I haven't had to buy any yet.
 
Last edited:
I do, but good point. Right now, I have RCA's in all but one of the inputs, plus a GE in the last, but I think the RCA's occupy the AUX and phono spots, which I mainly use. Maybe I can try a Westinghouse or some other warmish tube. I already have WH 7591's in the power section, so no point in changing those. Basically the best 7591 ever made, which makes sense (They invented the 7591, I think). But I can always tweak the AUX section. I think what it's time for is a new DAC. My system has outgrown it, I think, although I give it credit for taking my system as far as it has. I've owned that thing for like 4 years. I want a few things though. I want SFB's, E90's, a preamp/power amp combo that is a clear step up from my 800C, a full refurb for my Akai 1710W reel-to-reel, some stands for my Denton reissues, an AMP for my Denton reissues, and let's see, maybe a relube for a couple of Dual idler-drive tables I have (Those are a perfect match for W90's... 1019, 1219, 1229, etc.).

Aux and phono. Those are the ones that will realize the most noticeable effect from rolling. Everything else leave as is. What is it about the 800C that you think would be improved with something else? I really like my Heath separates, but I don't think they're better than my all in ones. Just offer a different flavor.
 
Fortunately the woolen surrounds on the w90s are fine. Just the w40s that have the issue. I wonder if simply applying a thin layer of the white surround glue will do the trick! Otherwise thanks for the fleabay suggestion.
 
Back
Top Bottom