• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

I put a micrometer on the Tinsel wire on the Wharfedale speakers I have and they all had tinsel wire of .88mm diameter. The tinsel wire from Lord of Bass is far higher quality than anything I have seen on vintage speakers.
 
Last edited:
My caps are here tomorrow. I figured out how to get the backs off without cutting any leads. Cant see any ATTACH=full]1648287[/ATTACH] 20191018_200023.jpg date codes but things look great!
 

Attachments

  • 20191018_200157.jpg
    20191018_200157.jpg
    35.7 KB · Views: 3
Look for something like this on the speaker cone.
40813DAC-D982-4BB1-AFC5-96B4EE49025C.jpeg

Wharfedale was so poor in it’s documentation. I am not really sure if Wharfedale paid any attention serial number pairing. There is a single W70D in each box. Two were ordered so two boxed W70D were shipped. My W25’s, and W35’s have no serial numbers at all. My W45 do and they are not consecutive serial numbered and I know for a fact they were purchased new together in 1970 and have never been apart. There is another thing I think was going on the crossovers they were assembled by hand. The label was affixed when the crossover after assembly and testing than they were sent to the assembly floor. I am fairly certain the W25,35,and 45 were assembled in New York State. These 3 models are nowhere mentioned in the UK. There is a vage reference to “the American Wharfedales”, The crossovers were stiil made in the UK, as were the speakers. The cases might have been made in Missouri. I am just finding hints of this nothing I can document.
 
Last edited:
I saw 9 68 on a woofer and 7 68 on a midbass. Extremely hard to make out! Also the chalksmanship is a little rough. So these are probably from the end of 68. Which is cool because my bozaks are from 67.
 
Well, I recapped and apparently one of the tweeters was bad. On the upside, with the new caps the other one sounded amazing. The room i was in i was comparing with a set of polk monitor 5s. The w70ds were louder, and at least as well balanced. The one good tweeter was very smooth. I've ordered a pair of the purple tweeters.
 
Well, I recapped and apparently one of the tweeters was bad. On the upside, with the new caps the other one sounded amazing. The room i was in i was comparing with a set of polk monitor 5s. The w70ds were louder, and at least as well balanced. The one good tweeter was very smooth. I've ordered a pair of the purple tweeters.

There are also the drop in replacements at
https://www.simplyspeakers.com
You will want to do what I have done purchase spare drivers. You know the rule of St Vidicon of Cathode; If thou has it’s replacement the original shall not fail.”

Simple Speakers has a repair kit that might work on the purple tweeters.
 
Last edited:
There are also the drop in replacements at
https://www.simplyspeakers.com/

Simple Speakers has a repair kit that might work on the purple tweeters.
Thats a nice link but with shipping i got a pair of the originals for 60.00. Listened a little more and i definitely want them both to sound like the the good one with the dayton caps. Its a great sound. Not gonna say the will replace my bozaks but i will enjoy having two rooms with terrific vintage speakers in them.
 
I have 3 of the 6 Wharfedales introduced in late 1969. i intend to at least get a set of the W60E, and W70E. The W80A Veriflex is so rare that I can only hope. But before that I want a integrated Tube amp of 40-45 Watts per channel.
 
I have 3 of the 6 Wharfedales introduced in late 1969. i intend to at least get a set of the W60E, and W70E. The W80A Veriflex is so rare that I can only hope. But before that I want a integrated Tube amp of 40-45 Watts per channel.
I used to have dynaco tube stuff and it sounded wonderful but nowadays im happy with adcom 535s. The vintage speakers though make me really happy. Its funny i got polk m7s and thought i was done. Now every speaker i find is more fun. I love having things i couldnt afford when i was young.
 
If you want to be amazed check out the Dayton DTA120BT. I have 2 of them one powering the W35, the other is on the W45. They are a Class “D” switching amp. They have the sonic characteristics of a Class A, but are over 80% efficient. 60 watt’s per channel into 4 ohms. You cannot loose considering the price, $98.80.
https://www.parts-express.com/dayto...N5vXA6sjM00SZ-Oev0YsBXYhkhz2RvzkaAl2lEALw_wcB
Ive got a smaller stereo amp in class d that my son is using in his studio. Fun stuff.
 
Sorry, it was a Chicago area post for a pair of w70. The price was 150. Glad it went to someone, I was tempted but I am running out of room.
 
Got lucky the W25, 35, 45 use the BIC 8983 tweeter, while the W35, and W45 use the BIC 413 midrange. They are not easy to find. I have a watch set on eBay for vintage Wharfedales. Picked up a set if these speakers that were in a W45 speaker. Great price too. Now I have 3 of each of these 2 drives in the parts stash I am good to go.
8E42F321-6AE6-432D-B184-9AF6195E9FC2.jpeg
A360CC04-B691-42FB-AC82-5A33402C21AC.jpeg
 
Back
Top Bottom