• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

I have a general question about Wharfedale’s internal wiring. My W25’s, and W35’d use removable spade clips on the speaker side internal wiring. The W45 is soldered on the speaker side. Is the also true for the W60’s, and larger models?

I am going to replace the 50 year old internal wiring on the W45’s nothing wrong with it but I want to increase the length of the wire by no more than 6” inches to facilitate servicing in the future. It presently has 18 gauge strained, I am going to go to 16 gauge strained.
 
I have a general question about Wharfedale’s internal wiring. My W25’s, and W35’d use removable spade clips on the speaker side internal wiring. The W45 is soldered on the speaker side. Is the also true for the W60’s, and larger models?

I am going to replace the 50 year old internal wiring on the W45’s nothing wrong with it but I want to increase the length of the wire by no more than 6” inches to facilitate servicing in the future. It presently has 18 gauge strained, I am going to go to 16 gauge strained.
My w70ds are soldered.
 
I was looking over one of my spare W45 crossovers and I have decided to do some upgrades on the installed pair. I am going to change out the solder lugs/tabs to start with, and add some nylon washers. The speaker binding posts on all of my Wharfedale’s have a habit of loosening up forcing me to remove the woofer to stick in screwdriver to tighten it back up. The replacement tabs are locking type fix this problem. The tabs are also setup for larger gauge wire. The nylon washers are to protect the 50 year old plastic frames on the inductors. I have not made the decision to rewire the crossover. The only reason to do it is the 18 gauge wire I have have has better insulation and is physically thinner than the 18 AWG sold installed which will clean up the wiring.
 
Just took possession of my second pair of Rosedales. Look to be in good shape with the exception of some missing veneer on one side. Grill cloth and badge are perfect. These are an earlier version as entry is from the back side of the speaker cabinet. I'm crossing my fingers that all the drivers are original and good. I won't know that until I get them home after work. Anyone here ever stacked two pairs of W70E's ?
 
If you stop and think about it that is what a W90 is.
View attachment 1676854
View attachment 1676853
The W90's have two 12 inch woofers. Two W70s would have two 15 inch woofers. It might make a difference. I brought them in the house for a cursory test. Not hearing any mid or tweeter out of either and the woofer sounds like it;s passing up to 8KHz. I'd say most all the caps are dry. The good news is the woofers seem to be in great shape. No buzzing or rubbing, and capable of producing house shaking bass.
 
If you put the top one upside down, the tweets will be together. Bottom one upside down, woofs will be together.
Interesting you should talk about putting the top one upside down. As it turns out someone - a long time ago - rotated the badge on the grill and these have spent the majority of their lives with the tweeter on bottom. Not ideal for high end dispersion. I took the backs off last night and found all drivers read good. Speakers look and sound pristine with the exception of some tired capacitors.
 
Ah, so it’s a three way with a passive radiator. I didn’t know that.

My W70E is just a three way and I really love it.
Its really just an open back 8 getting pushed around by the 12. Im listening to a pair right now while testing an old garrard at60. Damn good sounding w70ds!
 
Ah, so it’s a three way with a passive radiator. I didn’t know that.

My W70E is just a three way and I really love it.
I agree with you. I love my W70Es. The bass just feels effortless. I found the second pair of W70E's by accident on ebay of all places. They weren't posted in the correct category so most people never saw the listing. I can't wait to get them restored so I can stack them and shake the house:)
 
Can anyone ID these beasts?
 

Attachments

  • 5524A979-6B60-42A3-8F19-C0513CBF3770.jpeg
    5524A979-6B60-42A3-8F19-C0513CBF3770.jpeg
    100.1 KB · Views: 25
  • 4FAB4E83-E076-4B5B-BCC8-C90E403832FC.jpeg
    4FAB4E83-E076-4B5B-BCC8-C90E403832FC.jpeg
    124.7 KB · Views: 21
  • 4B0286FB-C9D9-4DF3-9606-9F774CAF544D.jpeg
    4B0286FB-C9D9-4DF3-9606-9F774CAF544D.jpeg
    66.2 KB · Views: 23
Back
Top Bottom