So I just started work on a pair of Rosedales which appear to be a very close relative of the W70E. All of the speakers are in pristine condition which includes the purple dome tweeters. Access is through the back, and the crossovers was scewed to the back. I pulled the crossover out and measured all the caps, and also measured the one inductor that was unmarked and made a schematic. This model has a simpler crossover that has no LPads, just a fixed 3.3 ohm resistor in the tweeter path. The woofer has a 4.0 mH inductor in series to roll off high end at 6 db/octave. Everything makes sense EXCEPT the phase of the woofer appears to be reversed!? I'm not sure if this was a mistake or if they did this intensionally. I am going to investigate further to see if perhaps they soldered the wrong color wires onto the woofer (I'll perform a battery test to determine the posive connection). One thing I know for sure, if these were intentionally out of phase that aren't going to stay that way. I want to run these with my W70Es, and they have to be in phase with them so they don't null out the bass. I'll post pictures of this restoration as I get further along.