New profile posts

Hello - were you ever able to locate Baldwin schematics? I have a power transformer and it looks identical to the one in your third picture - 003.jpg. I know the voltages, but not the current ratings. Any information would help. Thank you!

one of the 47 uf on the relay board are backwards according to the schematic and other techs.

Need help, I need to purchase new cross overs for a pair of Dalquhist DQ 10, I live in Mexico with makes it more dificult to find someone. Thanks for the help

Hi Dave,
Hope you are still sending out lights, etc. I'm looking to relamp my Marantz 2285B with incandescents. I also need a dial pointer light. Can you let me know what this runs and shipping dets.
Thanks,
Steve

Looking to buy the "STK-0050-II,60,70,80 replacement Modules(2), complete kit with all parts & docs" off eBay, but there is a no ship to Maryland, US issue. I messaged you about it. Do you sell here? I can do PayPal or Venmo.

I have a Fisher SA 880 I can't seem to part with that needs "restoring".

Thanks again!

David Heikamp
717 Giuffrias Avenue
Metairie, Louisiana 70001-4814

The regulator current draw is from the feed resistor through the 0D3's.

Should not affected by the drivers or grids. According the original schematic...

RIP sansui au719 - 2026. This member's memorial information can be found here: AudioKarma's Memorial Wall

Hello. I am an audio enthusiast living in Japan. I can provide information on the DS-3000, specifically the crossover network diagram and component values that I have analyzed.

Hi, My name is Dan and although I have mostly collected, restored, and sold racked studio gear, I have a few pieces that really fall into the audiophile catagory. I will be listing them but I am not familiar with this system...Yet! Its coming. A few things I have, McCurdy transformer discreet broadcast quality phono preams(pait, Altec model 9842 (grey) same as Altec model 14, and all original Kenwood Model 700m.

I'm here

Here's hoping you are OK Seth. I haven't seen you posting for a few months now.

Hello there! We are reviving the Open Reel Tape Rotation/Swap and I was wondering if you want to participate. We have 5 members taking part at the moment and would love to have you if you are interested still. Check the latest post for info - https://audiokarma.org/forums/threads/any-reel-guys-interested-in-a-tape-swap.80487/page-232

Hi Dave. Restoring a Sansui 5500. My original fuse lamps measure 23.1mm overall. Looking for warm white LED replacements. Do you have the correct lamps or know the proper replacement? I found an eBay kit but wanted your opinion before ordering. Thanks, Paul @ PHD Vintage Audio Services

RIP Catrafter - 2025. This member's memorial information can be found here: AudioKarma's Memorial Wall

Bozak B 4000, 2 sets of crossovers, N101, N104 w/ original capacitors.
Several options for amplification: Dynaco Stereo 70, Dynaco 120, Pat 4, Hafler 200. Peachtree pre-amp w/tube, amp 200 watts? Carver amps, 1.5T, red diodes, 2 Carvers, w/view meters,

Dahlquist DCM 9 pair, DCM 7 pair, DQ 10. All need to have surrounds replaced.

Marantz Model 18 questions

Solutions to problems are better than complaining.

Hey! Do you know the technical specs of the Technics SE A100 VU meter light bulbs? In the manual it appears as XAMS19P. See attached photo:

Hello sir. I am in need of a volume control for my AU-717. I have read that you have a solution or spare parts for sale. Any help would be appreciated