• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

2330b

  1. tutor_turtle

    2330B Driver board dilemma.

    I have 2330B in for blown outputs. The customer was driving two 4Ω speakers and fried the driver board. I identified the many, many damaged parts.. Some transistors are unavailable so I used the recommended On-Semi replacements. I even managed source original output transistors. I could not get...
  2. AZBiker

    What type of wire?

    Hello, I'm working on a 2330b. I found that one of the wires that connects to the P700 board through a connector, broke at the connector. It's a two-conductor wire that goes to the Power Amp In RCA jacks on the back. It appears to be simple 2-conductor wire but it could also be shielded; it's...
  3. jFF_Bulbo

    2330b help!

    hello AK'ers I´m working on a 2330b. previously repaired without succes. power supply recapped, new transistors, new relay, single diodes an double diodes as well preamp, phono recapped power amp recaped BUT after changed capacitors, transitors, new mj´s 95/96 output.... one chanlles refuses...
    • jFF_Bulbo
    • Thread
    • 2330b dc offset help p700 q710 repir restoration upgrade
    • Replies: 10
    • Forum: Marantz Audio
  4. K

    Marantz 2330B LED Light Kit

    I've been looking all over at kits for my recently acquired 2330B. I've been running it for about a week now without any issues except a few bulbs behind the tuner dial is out. Looking at options all over the place and I'm not sure what to buy. Anyone have recommendations?
  5. A

    MARANTZ 2330B Power Board P700 Choke induction

    Hello i need to replace the 2 Choke induction (L701/L702) on my Marantz 2330B P700 Power Board . For the manual the value are 2,2uh. Seems a small value compared to the size. I hope it is not a mistake in the Manual. Can someone advise me where to find an alternative component for the L701 /...
  6. T

    Marantz recap and restoration service near me

    Hi, I'm looking for an audio repair/restoration shop preferably near Puyallup or Tacoma, Washington area that does full recap/restoration service for vintage Marantz receivers. I own a Marantz 2330b stereo receiver. I appreciate any recommendations from this group. Thank you.
  7. klamsoss

    A 2330B rebuild

    I have this monster of a receiver on the bench now (still need to tidy up the clipping on the 1060, but it's pretty much good to go) and am preparing to tear into it. My goal is to replace all the electrolytics, set whatever levels need to be set for best performance within the pre and power...
  8. rpeter46

    Marantz 2330B resurrection thread

    My co-worker recently mentioned that he had some 'old' marantz gear lingering in his garage. He wanted to know if I was interested in buying. I told him "YES!" Bring it in, and we'll probably get a deal worked out. It was too heavy for him to lift, so I went to his house and brought home a...
  9. S

    Marantz 2330 B Filter Capacitor help please

    I have 4 , 6800uf 100v Rubycon capacitors. They have 4 solder lugs, 1 neg and 3 pos. My 2330 B has red ,white and a ground plate. The red goes to pos, the white goes to neg as neutral but I don't know where to solder the ground plate . I need a common wire. Can someone please help me? Maybe a...
  10. Marantz 2330B

    Marantz 2330B

    • vonriess1
    • Media item
    • 2330b marantz
    • Comments: 0
    • Category: Marantz Gallery
Back
Top Bottom