• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

4400

  1. Kelly62

    Pioneer VSX 4400 Display went dark

    So as I was sitting back listening to my Pioneer VSX 4400 The display faded to black, came back on and faded to black again and remains black. The audio was not interrupted. Just curious if anybody has had the same issue and how you resolved it? Caps, fuse, failing solder connection? I do not...
  2. ocdecio

    Marantz 4400 - broken PS connector

    Just got this 4400, and was about to work on it. However the connector is broken and someone patched pin 2 directly to the board. Would anyone have suggestions on the best way to fix this? Ideally I think I should look for a new connector.
  3. PooPoo

    Marantz 4400 Scope Harness

    Hi can anyone be so kind and tell me what color wires goes to what number in the scope harness. I took it apart to try to do a conversion but now I lost track of which wire goes into which number on the harnesss.??
  4. goldswimmerb

    Add flyback Diodes to Marantz 4300/4400

    Hey, I would like to add flyback diodes to my Marantz 4300s amp boards, there's a few pics around showing the 4400 having them, but I'm not able to discern how they're wired up. Anyone either know how they are, or would be willing to post pictures of the 4400s flyback diodes? For reference...
  5. T

    4400 balance control RG03 potentiometer- dump question

    Hi, I have this 4400 on the bench and have a really dumb question. the slide potentiometer - 4 x 50Kohm - RG03. seems like a strange potentiometer to me. seems that channels 1 and 2 have resistance going from 0-50K from side till the middle - then constant 50Kohm channels 3 and 4, going in...
  6. Richs_Trains

    4400 Transformer Hum

    Just curious as I am new to my 4400. It has a noticeable hum, quiet but there, coming from what seems is the main transformer and I was just wondering if someone else with a 4400 could let me know if they hear a quiet hum when it is on and not playing? Of course, when the sound is on, you...
  7. Richs_Trains

    Newest Member of the Family...

    Fully restored 4400....
  8. G

    Bizarre 4400 melted relays

    Dear colleagues, nice to meet all of you. Prior to writing this post, I searched all the internet - including Audiokarma - but with no success. I bought an untouched Marantz 4400 made in 1976 with wooden cabinet and with a few common issues. I managed to fix all of them and all channels are...
  9. C

    4400 Mixing Speakers? Is this a problem?

    I know it is quite a basic question but it's beyond me. I have a Marantz 4400 with which I've been pushing 4 X 12 ohm Zu Omen MkII speakers through the four Main front & rear speaker connections. Set, of course to 50W X 4 mode. I wish to also connect 2 X 8ohm FMI 80 speakers to the Remote...
  10. My mostly Marantz quad system

    My mostly Marantz quad system

    Spinning "The Best of The Doors" in CD-4! "Hey Philadelphia, Do you feel alright?" JM
    • WMF2
    • Media item
    • 3800 4400 cd-4 jvc marantz
    • Comments: 0
    • Category: Member Galleries
Back
Top Bottom