• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

channel out

  1. M

    Dual 1229 - One Channel not working

    HI, I recently purchased an old dual 1229 (as is condition) which I cleaned up, replaced worn plastic parts, and got working mechanically. Once finished, I noticed that only one of the two channels works at any time. At first, it was the right channel, now it's the left. Sometimes, it's both. I...
  2. D

    M-50 Lost Right Channel

    I bought a used M-50 in Europe (Dual Voltage) and I've had right channel issues from the beginning. A little tap on the top would bring the channel back. The tap became a slap and now the channel is out for good. I'm not a tech and don't know how to check resisters etc. I see nothing damaged...
  3. goldswimmerb

    C-60 dropping one (or both channels)

    Hey, so I'm looking for some advice here regarding a frustrating yamaha C-60, long story short, after a period of being idle, at low volume it will drop on or both channel, sometimes sounding fuzzy (like a dirty control). I would assume the controls are dirty, however, aside from the sealed...
  4. 93SCMax

    Teac CX-400 3-head deck with output problem

    Original owner, deck purchased in 1981. Great recorder and playback, gave me many good years of service, the last 18 in my garage workroom. Last year I replaced all the belts and cleaned some of the switches. I lost the right channel on playback (pic 1). When running a source to the deck for...
  5. 66BigBlue

    Pioneer SX-525 channel issue - newbie needs help

    I’ve got a pioneer sx-525. The left channel has almost no sound coming out of it when it is in stereo but comes on in mono. I have cleaned all pots with deoxit and have checked all fuses. Are you able to guess what the issue might be? Based upon what I have read it seems like it could be bad...
  6. C

    Harman Kardon 430 Twin: Left Channel out in Aux, Phono. Works in Tape Monitor

    Grabbed a well-loved HK 430 Twin recently. It sounds perfect when I hook up a device to tape monitor function, but when I try phono or aux I get silence from the left channel. Same results with headphones. The Mono button, when pushed, silences the sound entirely. I de-ox'ed everything...
  7. Dan887217

    Sansui 8080 Pawnshop Special.

    Well last week I paid off the layaway on my new to me Sansui 8080. One lamp is out for a meter but that’s not my worry. The sound is grainy muffled/distorted slightly. On all inputs/ sources. Dolby board when engaged using aux turns all sounds off. Dolby fm am is fine. I don’t see any...
  8. mrwood

    Technics SL-D3: One channel out.

    I just bought this turntable today. Dirty, but looks like it's in decent condition overall. It came out of a guy's basement where it's been living for a few years, and cost me $35. It is heavier and better constructed than any deck I've had so far. The tonearm suspension looks substantial. The...
  9. copezone

    Channel out until i power down..MARANTZ 19

    I'm sure there is no quick explanation to this, but. The left channel is completely out until i power of. The channel kicks in instantly after the power button has been depressed. The usual suspects have been addressed (deox/caps/trans..) I feel like I'm overlooking something very simple...
Back
Top Bottom