• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

low output

  1. waggs098

    Crown CE 1000, channel 1 low output, help

    So I have the above amp powering my mains. Thursday I came home from work and my son was listening to music and shortly after he shut it off. I turned it back on about 30 minutes later and channel 1 had low output and sounded slightly distorted. I didn't notice it when my son was listening...
  2. A

    Denon DL103S on MM Input?

    Hey all. Wondering if anyone can shed light on this. Purchased a Denon DL103S on eBay last weekend; output is 0.3mV, so needed to be into my MC input of my Nakamichi CA7 preamp. Manual says it set to "24" for gain. Cartridge impedence is 100ohm. Pre is factory-set to 100ohm. Except there's no...
  3. MisterDK

    Grado cartridges - low or high output - and why ?

    Considering trying one or two of the current Grado “woodie” cartridges and wondering if there’s a good reason to pick either low or high output version over the other. I can handle either with a very quiet phono preamp and/or SUT’s that I have. Have any of you tried - and compared both low and...
  4. MisterDK

    Low Output Grado questions -

    Hey folks! I’m curious about the low output Grados. Is everyone using these just at higher gain settings on their phono preamp? This may seem a foolish question but.. can a SUT successfully be used with them or would loading be all wrong? Thanks.
  5. klamsoss

    Fisher FM-100-B issues

    I've just picked up a Fisher FM-100-B tube tuner and it's a nice looking piece of equipment. I am pairing it with an X-100B integrated amplifier (and some Tekton Lore speakers). Cincinnati is lucky to have a good classical station, two stations which between them maybe equal ONE occasionally...
  6. viennadad

    A Little help with AX-900

    I picked up an AX 900 a few weeks ago. First thing I did was verify it powered on before I lugged that heavyweight home. It did. Got it home and hooked it up to a spare speaker set using the Aux input. Everything appeared OK at low levels besides the obligatory scratchy pots. Gave it 2 cleanings...
Back
Top Bottom