• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

mounting

  1. Isaac C.

    Kenwood KD 500 and Sumiko MMT Setup Question

    Hello everyone, I just acquired a Kenwood KD 500 for which I will be mounting a Sumiko MMT. I have a friend making a blank armboard for it. The Sumiko has a spindle to pivot distance of 221.7mm. On the stock armboard the pivot to spindle distance is 222mm to the dead center of the armboard (I...
    • Isaac C.
    • Thread
    • kd 500 kenwood mounting sumiko tonearm
    • Replies: 5
    • Forum: Turntables
  2. nickdinatale

    Gray 212 / 216 transcription arm mounting instructions

    Since this info doesn't seem to be readily available and I have one of the original instruction "manuals" (actually just a stapled packet), I figured I would upload it for anyone who needs it. Hope this helps someone out!
    • nickdinatale
    • Thread
    • 212 216 gray gray research instructions mounting specs tonearm transcription
    • Replies: 2
    • Forum: Turntables
  3. J

    Refoaming Advent 2W question

    I just got a pair of Advent 2Ws at a flea market and am about to attempt my very first refoaming job. When I took the speakers out, I realized that one of the previous owners had made a mess of them. The back of the mounting bracket has Silicone caulk around it. The other substance on the back...
    • JakPetrov
    • Thread
    • advent 2w mounting refoaming
    • Replies: 1
    • Forum: Speakers
  4. airIck

    Hanging / Flying Speaker DIY Hack

    And I do mean "hack". I've been meaning to post this for a long while but keep forgetting. A couple of years ago I needed to get my Drum Room speakers up in the air due to space limitations. As the room is unfinished storage cosmetics weren't a concern and placement wasn't a huge concern...
    • airIck
    • Thread
    • flying hanging mounting
    • Replies: 5
    • Forum: Speakers
  5. Ram_Air_Intake

    Energy ESAT-2 Repair

    Hi, I have had a pair of Energy ESAT-2 speakers with rotten foam surround for a while. I ordered a surround repair kit for them as well. My question is upon disassembling the speakers there was a significant amount of glue holding the speaker basket to the front of the enclosure and some glue on...
    • Ram_Air_Intake
    • Thread
    • basket energy esat-2 foam glue mounting repair surround
    • Replies: 1
    • Forum: DIY
Back
Top Bottom