• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

removal

  1. JSMATT

    Another Molex Q

    The attached photos are from a B-2101, the 4-pin molex from transformer to the 4-caps array. I cleaned these female ends with a toothpick and stretched them just enough to make me concerned. Yes, a bit of a dumb#$@ move. So, this post is to see if anyone has successfully removed these and, if...
  2. L

    How Remove Speaker Grille from Bose Model 21

    I've seen a couple of threads asking how to remove the grille from Bose Model 21. The simple answer is: you aren't supposed to do that. Bose doesn't want you to remove it and doing so will surely void your warranty. They would rather you buy a new speaker from them. But as "luck" would have...
  3. Moonwatcher

    Removing a Marantz 1515 faceplate

    Hi, I'm replacing the lamps on this unusual model and was wondering, does anyone know how to remove the faceplate on these later Marantzes? I removed all the screws on the bottom of the plate and knobs, including the tuner's with its 1.5mm set screw. It is sliding out at the bottom, but I can't...
  4. Zack Sainz

    KLH 5 knob removal

    Hello gang! I’m trying to get this crossover out so I can work on it. I can’t for the life of me get the knobs off the back. Any tips?
  5. D

    Anyone know how to remove the bottom cover of the Pioneer PL-560?

    Need help removing the bottom cover of a PL-560 to get to some of the components not reachable from the top. Thanks.
  6. R

    Repairing Kef B139 SP1044 Woofers

    I've found that the glue between the spider and the middle cone has deteriorated and resulted in a total separation. The spider is still in great shape so I don't really want to replace it. However, there is still a fair amount of old glue left on it. The way I see it, I have 3 options: 1...
  7. Y

    HELP!! Teac 6010 Pinch Roller Arm Removal

    I have that classic problem of a stick/sluggish pinch roller. I want to remove the pinch roller arm and clean it and re-lube it. The photo shows how far I have gotten with the tear down. I have read many other threads about this issue and none of them seem to outline how to remove it. I...
Back
Top Bottom