• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

solved

  1. T

    low volume in left channel SANSUI 600L

    hello i have a problem in the left channel of my sansui 600l when i select FM radio the left channel is weak (volume lower) than right channel !!?? when i activate the mono button i get the sound ok right and left (same level) this problem is in FM radio (i cant check AM because i don't...
  2. granto

    Tascam 414 input noise, only on tape

    Hello, If I record to tape with no inputs plugged in, the resulting recording is quiet. But as soon as I plug in the outputs of my PC's audio interface to the inputs on the 414, even with no signal, each respective track of the recording becomes noisy. However, I do not hear this noise in my...
    • granto
    • Thread
    • solved
    • Replies: 11
    • Forum: Tape
  3. J

    Marantz 6300 auto function turns off power

    Hi- I see a lot of threads on the Marantz 6300 turntable- my issue is that not only does the auto function not operate correctly, but when it is engaged the table shuts off power, the strobe bulb goes out- it just shuts down. I have recapped the board and cleaned and deoxed everything. The led...
    • jackson
    • Thread
    • marantz 6300 turntable auto shutoff solved
    • Replies: 3
    • Forum: Turntables
  4. Mike1767

    Cr-2020 Troubleshooting

    I have recently brought home a 2020 from my parent's basement that I am hoping to bring back to life. Growing up, it was my Dad's pride and joy, but it has now been sitting unused for too long. I am half decent with a soldering iron and multimeter and can read a circuit diagram, but I can't...
    • Mike1767
    • Thread
    • cr-2020 protection circuit issues relay solved troubleshooting yamaha
    • Replies: 18
    • Forum: Yamaha
  5. O

    Akai 4000db motorboating

    Greetings! I picked up an akai 4000db on ebay a few weeks back that was cleaned but had some electrical issues otherwise it all functions normally. When I first got it the left channel wouldn't record until the machine had been powered on for awhile but it played back fine and there's this...
    • Oceanotter
    • Thread
    • 4000db akai motorboating popping solved
    • Replies: 10
    • Forum: Tape
  6. JHN272

    Inherited SS-TL5s - Need Help!

    Hey guys, new here, hoping I can get some help! I have inherited a pair of Sony SS-TL5 speakers (http://www.thevintageknob.org/sony-SS-TL5.html) from my late father. These have sat for years and years at my grandmother’s home (so dusty) and I finally got to take them home today. It was a long...
    • JHN272
    • Thread
    • help repair solved sony
    • Replies: 23
    • Forum: Speakers
  7. Golanr

    G-9000DB Distorted sound on left channel (Solved)

    I have this receiver for 6 years now and had no issues with it. Last week the left channel started sounding distorted, even on headphones only, which means this is happening prior to the amplifier side of the house. It starts getting distorted after 10-20 seconds. I did notice that without...
    • Golanr
    • Thread
    • 9000 driver f-2799 f-2806 f-2809 g-9000db recap restore solved speaker posts
    • Replies: 54
    • Forum: Exclusively Sansui
  8. A

    Sansui 210: buzz in audio output at work, but not at home

    I have a Sansui 210 that I purchased to use at the office. There's a buzz in the headphone output when I plug it in at work, but not at home. I have an EE friend who likes to mess with stereos. He wasn't able to reproduce the buzz at his home, either. He opened it up and couldn't see...
  9. Nick_the_'Nole

    Fisher BA-6000, help finding a transistor sub?

    So I'm finally getting around to working on a Fisher BA-6000 power amp that I picked up a couple years ago. Normally I wouldn't bother with 'Stupido Standard' gear, but this thing actually seems to be pretty decent quality... must be a fairly early example, from before the company completely...
Back
Top Bottom