• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

xlr

  1. tutor_turtle

    Luxman MB3045 with XLR input?

    My Luxman MB-3045 monoblock amplifiers are 16 feet (4 meters) from the preamp in order to have short speaker cable runs. Single-ended RCA's are really not up to the task at that length, without spending an exorbitant amount of money. My BAT preamp has XLR outputs as well as RCA Has anyone...
  2. Jeromeof

    Blafili B3 - Bluetooth (and USB) DAC with XLR

    I thought I would post a short review of this item might be of interest here for those wanting to add a Bluetooth DAC (with all the codecs including LDAC and AAC) into their stack via various output options (including XLR and digital outputs). The USB input also works well but it does not...
  3. O

    Audioquest Water XLR Interconnects

    Hi all - Just installed a pair of Audioquest Water XLR Interconnects between my preamp and my monoblocks. They are replacing a pair of Cardas Quadlink 5-c XLR Interconnects. I'd like to hear what difference I should be experiencing, then I will tell you what I am finding. Please let's keep...
  4. VonDrake

    Velodyne ULD subwoofer Servo Cable Question

    I am currently using a vintage Velodyne ULD-15 subwoofer from 1986 in my home theater setup. More or less happy with it, although I suspect the 5-pin servo cable has a short in it somewhere. The cable works well, but If it's moved, it sometimes causes the driver to pop, or worse - so I don't...
    • VonDrake
    • Thread
    • servo subwoofer velodyne xlr
    • Replies: 34
    • Forum: Speakers
  5. C

    Mic for Sony DSR-PD150 camcorder?

    I've acquired a Sony DSR-PD150 camcorder without a microphone, and I'm wondering what my options might be for a suitable affordable new or used microphone. I tried my Audio Technica AT9100, and it can barely be heard, even with the gain turned all the way up. I'm guessing this is because it's a...
  6. GearHead454

    connecting equipment with XLR: mixing balanced and single ended

    Long title sorry about that. I have a Modwright preamp (LS100) that has XLR inputs that are specifically noted as being "wired single ended". I am about to get a Lumin D2 DAC/streamer that has XLR outputs noted as being "balanced". I did a little reading to understand the difference in how...
  7. aabottom

    Multi room audio system, XLR balanced cables

    Anybody run XLR balanced cables for a single source multi-room 2 channel audio system? I’m looking for advice on a music distribution systems. If there are big advantages for using wireless, some sort of optical links, or other methods, I will consider those options. I guess I’m hard core ol’...
  8. Mrs. Henry

    Connecting XLR to Standard Speaker Wire Jacks

    Hello, Are there speaker cables available that would enable me to connect a Luxman R-1050 (standard speaker wire jacks) to the XLR input on Spendor BC 3 speakers? Much appreciated. Thanks!
  9. R

    Help: Accuphase XLR pin 3 hot into XLR pin 2 hot? (no unbalanced avail)

    I'm picking up an old Accuphase G-18 equalizer to offset my hearing loss. My research shows that the G-18 has pin 3 hot. How do I resolve this hook up anomaly, as the Accuphase has pin 3 hot, and my Boulder 865 has pin 2 hot? There are no unbalanced inputs on my Boulder. Thanks, a befuddled Ken
Back
Top Bottom