• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Air Guns

I found some more pics.

Custom Theoben pistol .25 made from MKII action. This beast does 55 Joules of erergy.

FFB03987-F37-A-4772-8-BCA-3551-FD8295-E4.jpg


2593-FE89-3-B67-424-A-B0-FD-8-ECB650-FCDEA.jpg


79-DE4-F6-C-15-E3-437-D-9407-34-A0-E0-D7-D715.jpg


3-C3-BAFA5-527-D-4-AF3-9-B04-3-C76138-CA234.jpg


9979-C69-A-1-B85-4291-AA80-8-E8982-FF6-FDC.jpg




FX Ranchero .22 30 Joule.

D3-FD8-CBB-136-F-4-DDF-B6-CC-B93-A9388-AA4-F.jpg


D46-E8-A36-C874-4344-93-BB-2-CBA096-C47-FF.jpg


D9-A90038-651-F-4-FB0-B9-C5-04-BCDB111-BF1.jpg


D176-AD5-D-447-F-4302-8-BEA-19-EBB7-F4-D884.jpg



Air Arms Pro Sport springer with Leupold 6.5-20x40 EFR

E8-A1641-E-595-E-438-F-A251-57351-A7-E372-A.jpg


D25-AB838-2-B19-4-AA7-9-BB6-A3222635-E8-CB.jpg


A9-E3905-B-9425-40-FC-9431-B055-B2-C39235.jpg
 
Haven't read the whole thread but I got to use a Gamo break-barrel with a scope on it last weekend that my friend's son bought at a pawnshop. I don't know the model but it was an impressive unit and I was doing way better (as a very infrequent/rookie shooter) hitting pop cans than I ever did with other rifles. He said this one retails for $260 something and he bought it for sixty bucks. Got half a mind to troll the pawnshops. It was some cool fun.

Edit: May have been the Gamo Whisper, I know it had some kind of silencer on it.


Yeah, that's a Whisper. I'm glad he's got a scope on it - the sights are atrocious. I had one for about 2 years and it's a good shooter, if you get a optic for it.
 
I diddled around with the P-shooter yesterday (Beeman P17 pistol). I determined it was time for an o-ring overhaul. And, while i was at it, I did a modification to the pump piston with some JB-Weld slow dry epoxy.

I did so after shooting at this guy, and, just denting it. It is stamped sheet metal steel of some form.
Brand new:
DSCN7497.jpg

So, to start, I gauged the amount of clearance within the compression tube by putting a piece of loosely crumpled aluminum foil into the pump cylinder, and, compressing the piston (no o-ring on it for ease of compressing). I did two of these, and, they measured the same, so, I made a blue masking tape perimeter barrier, and, mixed some JB-Weld
DSCN7508.jpg DSCN7513.jpg

I thinned the JB-Weld, with dentaured alcohol, for flow ability, which works perfectly as a solvent.

And, this is the new face of the piston, and new o-ring. The whitish band ring is the JB-Weld after having been lightly crowned with sandpaper, and shows the thickness of the modification.
For ease of measurements, and because I didn't take any,... the thicknoss of the Al. foil could be thought to be 3 units thick. I added two units, 2/3 of that thickness in JB-Weld, just to be safe.
DSCN7516.jpg

The results??
First shot:
DSCN7517.jpg DSCN7518.jpg
 
So, that basically shrinks the volume available for the air to be compressed into, which increases the pressure? Amazing results.
 
@toxcrusadr
Yep. It worked really well!
I don't know if you're familiar with the design, or not. It is a single stroke pneumatic pressurizing pump, with a cylinder and piston and sealing o-rings.

In my last o-ring replacement on it, I did a similar thing to the piston face with Al. duct tape. I added four layers of the tape. The tape adhesive was being pushed outward by the internal pressure, and I didn't want it to gunk up other passages and mechanisms. So, it got peeled, and the JB-Weld went back in place.
I used the compressed Al. foil balls as my gauging for the thickness of the perimeter boundary, moving them around the piston face, as I was taping. The new epoxy face is just the tiniest measure thinner than that cavity.
The o-ring replacements are simple. There are two crucial ones to building and holding/releasing pressure. One is extremely simple to replace; the main piston o-ring. The other is within the valve, and is the main valve seal; easily replaced, but a bit deeper of a dig.

I understand that these little plinkers went on sale at Amazon, for $7.50 each.
Some folk bought literally dozens of them. Let the tweaking begin. One guy has already converted one to .20 caliber.
 
Last edited:
@toxcrusadr
Yep. It worked really well!
I don't know if you're familiar with the design, or not. It is a single stroke pneumatic pressurizing pump, with a cylinder and piston and sealing o-rings.

In my last o-ring replacement on it, I did a similar thing to the piston face with Al. duct tape. I added four layers of the tape. The tape adhesive was being pushed outward by the internal pressure, and I didn't want it to gunk up other passages and mechanisms. So, it got peeled, and the JB-Weld went back in place.
I used the compressed Al. foil balls as my gauging for the thickness of the perimeter boundary, moving them around the piston face, as I was taping. The new epoxy face is just the tiniest measure thinner than that cavity.
The o-ring replacements are simple. There are two crucial ones to building and holding/releasing pressure. One is extremely simple to replace; the main piston o-ring. The other is within the valve, and is the main valve seal; easily replaced, but a bit deeper of a dig.

I understand that these little plinkers went on sale at Amazon, for $7.50 each.
Some folk bought literally dozens of them. Let the tweaking begin. One guy has already converted one to .20 caliber.
I'll be very surprised if that epoxy holds up. When it fails double face tape a thin piece of metal to the end. ;)
 
In testing it, I probably shot it 50 times today. I just opened it up, and took the piston out, and, the head of it looked fine. There were two areas where the gloss had been reduced by what I assume might have been slight contact with the end of the cylinder. They were very slight blemishes, as opposed to the gloss that it started out with.
I took the piston out to the garage, and chucked it into my drill press, and, lowered it very carefully onto a sanding block, and those two area of blemish opened up a wee bit, but the overall face came out more even. I'm going to do this slowly, but, if it needs to be opened again, I'll keep an eye on it.
I've done some pretty incredible things with JB-Weld over the years. And, like they said, quoting Farmer John,... Its better than duct tape which I already tried.

If the epoxy fails,... we'll address it at that point.

i took more pics, but need to offload....

alright, before and after shots.

on removing from pump cylinder. sorry for the camera suck! At least you can see the extent of the original blemish:
DSCN7519.jpg

And, after the drill press "milling" on the sanding block:
DSCN7520.jpg
The scunge around the o-ring is fresh lithium grease for reassembling lubing ^
 
Last edited:
So far I'm really impressed with the 1322 w/steel breech. I bought a very inexpensive BSA red dot sight from Pyramyd Air to mount on it since it now had a 3/8" rail, and I'm pretty dang happy with that combo. I have Eotech and ACOG dots on firearms, costing many times what this little BSA cost ($32), and I can hit the end of a tin can across the yard every time with pretty rapid acquisition. I bought some unfinished walnut grips and pump forearm off eBay (Alchemy AirWerks, no prior dealings), we'll see how that works out. The punch this pistol packs is surprising, I'm having a blast with it. I never really shot much pistol, but I think this thing is about as accurate as I can shoot any pistol. I might be able to do better, I inherited a couple of .22 target pistols, but right now I'm satisfied with my accuracy.
 
I forgot about this little toy.
We had to go to Walmart yesterday. I wandered over to the Sporting Goods section, and, couldn't resist.
Since I've run low on the real thing around here,.. to keep my skills sharp, and, because Sarge has had a blast pinging it, regardless of hitting the target or not, the Crosman Squirrel on a Stick resettable target.
84c06658-9c66-4d98-8f0c-a0a9683f4424_2.adb0d158b78f180ac13f6ac74e0f2bff.jpeg
 
truth in advertising posting,... regarding the P17 mod.

I've had the piston out numerous times, and cannot detect any changes in the epoxy. What did happen, and, it is part of a continuing issue, ramped towards failure with this mod,....
The valve stem spring collapsed to a point of not being able to handle pressure. There was an obvious looseness in all of it.

This is the original valve stem and packing arrangement, in good condition.
You can see where there are no gaps between the individual component pieces.
With mine, I had a gap that was large enough that I tried to shim it by inserting two additional o-rings immediately next to the mid stem o-ring. It was quite a gap. The spring had crushed out that far; likely due to it being shot around 2500 times, and exacerbated by the newly added pressure.
Good condition valve stem and packings:
oe-valve.stem.JPG

The black nut at the end, the hammer interface, is actually a threaded nut, that has had the screw end peened over to lock the nut on.
I took it all apart by simply unscrewing it. I took it to Ace Hardware, and found a too long spring that was slightly stiffer than the OE spring, and I rebuilt the valve stem, and added a nylock nut to the end, so that I could possibly add even a stiffer spring, if necessary.

My repacked valve stem, rebuilt yesterday:
repacked.stem2019-12.jpg

The nylock nut fits exactly like the OE nut, which had quite a bit of hammering to it over the course of time. It fit perfectly.
After all of this, I'm back to a seriously cracking shot, where with the defective spring, it was more of a pffft shot. I took it out front, and bounced a fallen tangelo around at 50'. So, were back to where we began before the spring collapsed.
And, I'm hoping this allows the gun to be cocked, and loaded, and hold pressure for longer than it has before. Before, it was cock and shoot, because in a few minutes, it was going to lose pressure (before any of this has been modified. In it OE specs).
 
Dang me. There is a change a blowin' in the wind around here.
I awoke monday morning, and wandered out to get some sun on my back on a cold morning. I wandered out to that place, and I look up the hill to my west, and what do I see? A bulldozer sitting on the crest of the hill at the end of a dead end street at the top of the hill.
Our place is on the eastern upslope at the top of a tributary canyon. We look across to the western upslope, which for 8 years has been open land. It was also home to the motherlode of squirrel den holes of all time.
I was concerned that they'd use this dirt access road down my neighbors property line as their driveway, as he is about it; but it looks like they're using the end of the dead end road above us as their access. That dirt road is my long shot, so I'm glad to see them going away from us in that area.
We'll have to see how this plays out. Hopefully we'll gain some displaced rodents in the shooting gallery as a result? There were a ton of them up there, but, not so much in close, for a particular reason.
From what I can see, I have no view of the grading from the Western Outpost. The grading is probably 30' vertical from my highest elevation at this shot. And, there is now a 2:1 slope rise beyond the high point of that shot, a far steeper berm from the cut soil that has been pushed downhill (and over the motherlode hole) than the native slope angle.


> The white rectangle is the newly cut ground. The smaller attached white square is the driveway access.

> Marker A 425' is long shot that I succeeded in once, after probably 10 shots "walking it in". What blows me away, is that long shot has been left open for decades, and supposed to be in perpetuity, due to the inconvenient fact that the towns 24" water main flows up and over that canyon slope, in the exact area. And, they've had a bulldozer in there pushing large dirt around now for two day (the developer, not the water district). If that line is hit, 24", it will shut off a town of 50k, and present a new Niagara Falls off the side of that cut edge.

> The Western Outpost 325' marker is my maximum range. The native slope angle there was sharply rising, and it has been made steeper now with cut soil. So far that shot seems to still be safe, and, with a steeper backstop of soil now.

The Mother Lode copy.jpg

/ panicking rant

To the good stuff, the rodent plinking.
I got one of xmas eve along the line of 275' shot, at 225' I got a second one on xmas day near there, but along the 325' line at 250'. And then, on sunday, I looked down the 275' line, and spotted a rodent.
Problem: I'm a righty, but shoot left, due to my right eye being blurry.
This shot was so far left, that I lost the ability to see it with my left side. So, i had to change eyes. So, I found a blurry brown thing against the green background (we're wildly rolling into weed season again). I found it, but, was about half magnification, so I brought the magnification into full focus, 16x. This made the brown blur look more rodent-like, and I could make out motion, so I fine adjusted the AO, and, let one fly, fully expecting to watch a Sage Rat haippily bounding off into the distance. Then I heard a loud smack of a pop, and, watched the blurry thing just tip over wher e it was sitting, and, saw its tail do the death twirl of a fuse box shot disconnect.
So, perhaps my last rodent from there for a while?
I've asked if there is ever a point where you defeat the rodent. In the last two days, their stronghold got nuked,... what was left of them after my long sniper battle.
I declare, that I at least got the best of them.
 
Dang me. There is a change a blowin' in the wind around here.
I awoke monday morning, and wandered out to get some sun on my back on a cold morning. I wandered out to that place, and I look up the hill to my west, and what do I see? A bulldozer sitting on the crest of the hill at the end of a dead end street at the top of the hill.
Our place is on the eastern upslope at the top of a tributary canyon. We look across to the western upslope, which for 8 years has been open land. It was also home to the motherlode of squirrel den holes of all time.
I was concerned that they'd use this dirt access road down my neighbors property line as their driveway, as he is about it; but it looks like they're using the end of the dead end road above us as their access. That dirt road is my long shot, so I'm glad to see them going away from us in that area.
We'll have to see how this plays out. Hopefully we'll gain some displaced rodents in the shooting gallery as a result? There were a ton of them up there, but, not so much in close, for a particular reason.
From what I can see, I have no view of the grading from the Western Outpost. The grading is probably 30' vertical from my highest elevation at this shot. And, there is now a 2:1 slope rise beyond the high point of that shot, a far steeper berm from the cut soil that has been pushed downhill (and over the motherlode hole) than the native slope angle.


> The white rectangle is the newly cut ground. The smaller attached white square is the driveway access.

> Marker A 425' is long shot that I succeeded in once, after probably 10 shots "walking it in". What blows me away, is that long shot has been left open for decades, and supposed to be in perpetuity, due to the inconvenient fact that the towns 24" water main flows up and over that canyon slope, in the exact area. And, they've had a bulldozer in there pushing large dirt around now for two day (the developer, not the water district). If that line is hit, 24", it will shut off a town of 50k, and present a new Niagara Falls off the side of that cut edge.

> The Western Outpost 325' marker is my maximum range. The native slope angle there was sharply rising, and it has been made steeper now with cut soil. So far that shot seems to still be safe, and, with a steeper backstop of soil now.

View attachment 1715640

/ panicking rant

To the good stuff, the rodent plinking.
I got one of xmas eve along the line of 275' shot, at 225' I got a second one on xmas day near there, but along the 325' line at 250'. And then, on sunday, I looked down the 275' line, and spotted a rodent.
Problem: I'm a righty, but shoot left, due to my right eye being blurry.
This shot was so far left, that I lost the ability to see it with my left side. So, i had to change eyes. So, I found a blurry brown thing against the green background (we're wildly rolling into weed season again). I found it, but, was about half magnification, so I brought the magnification into full focus, 16x. This made the brown blur look more rodent-like, and I could make out motion, so I fine adjusted the AO, and, let one fly, fully expecting to watch a Sage Rat haippily bounding off into the distance. Then I heard a loud smack of a pop, and, watched the blurry thing just tip over wher e it was sitting, and, saw its tail do the death twirl of a fuse box shot disconnect.
So, perhaps my last rodent from there for a while?
I've asked if there is ever a point where you defeat the rodent. In the last two days, their stronghold got nuked,... what was left of them after my long sniper battle.
I declare, that I at least got the best of them.
You keep shooting those rodents the town will put a endangered species law on them. :rflmao:
 
Them be a bit like rats, my friend.
Nuke goes off, armageddon,... cockroaches emerge, along with mice, rats, and sage rats.
I was out back, yesterday, inspecting my sandbagging efforts up above my property, as it seems like the incoming stream found a gopher hole or ground squirrel tunnel complex upstream, and poured into it. ugghhh.
When this happens, it travels downstream, underground, through the tunnels, and emerges as what I refer to as Gopher Springs. Gopher springs suck, because they'll pop up in completely random places, and, flow until whatever the inflow is that feeds it, stops. /sidetracked
This is why I detest Sage Rats.

Yesterday, I hear the familiar chirping of a sage rat on alert, and i look up the hill above me, and, there is a huge one sitting on its haunches calling out an alert (probably for a hawk or coyote). I immediately recognize another huge den complex, and see the rodent trails up there,.... hmm, angles and long shots,... hmmmmm

And, the day after I lament about running out of them (above),... I spot one in close at Sarges bird feeding area, like 40' out. I stepped out, and, it hightailed it for the hill above us.
So much time spent out front in the Western Outpost, maybe the eastern perimeter has a crack?
 
Last edited:
I bought one of these after seeing your post. I set it up at about 35 feet from the back porch and the 1322 has no trouble cycling it at that range with 5 pumps.

I forgot about this little toy.
We had to go to Walmart yesterday. I wandered over to the Sporting Goods section, and, couldn't resist.
Since I've run low on the real thing around here,.. to keep my skills sharp, and, because Sarge has had a blast pinging it, regardless of hitting the target or not, the Crosman Squirrel on a Stick resettable target.
84c06658-9c66-4d98-8f0c-a0a9683f4424_2.adb0d158b78f180ac13f6ac74e0f2bff.jpeg
 
I bought one of these after seeing your post. I set it up at about 35 feet from the back porch and the 1322 has no trouble cycling it at that range with 5 pumps.

I stuck mine in a flower pot that I filled with gravel. It makes it easier to move around to different locations this way.
 
Here's the 1322 with the new grips and forend. The wood didn't match too well, and the grip on this side has a crack in the surface that doesn't go all the way through but looks worse now that it's finished. Overall the stuff was pretty nice - it was just roughed in, quite a bit of sanding to get it like I wanted, but not bad.

1322a.jpg
 
I didn't install the steel breech, Pyramyd did that, but I put the grips/forend/red dot on.
 
Back
Top Bottom