Another A-700 repair thread

[guac]

Alright, this time it really should be correct. Turned the voltage all the way down to zero while on the DBT and adjusted it to 15.5mV on mains power.
Checked the DS offset at both channels, around 1mV.

I did put all the caps in my basket ready to order. Inspired by your post on the thread by Scottfer55.
All from Mouser, depending on the availability. I couldn't find the proper Nichicon caps for all values, but I tried to get at least other Audio caps as a replacement:

2x Elna RFS-50V102MK9#5 1000uF, 50V
2x Elna RFS-25V102MJ8#5 1000uF, 25V
2x Chemi-Con EGPD800ELL751ML30H 750uF, 80V
4x Nichicon UKA1H331MPD1TD 330uF, 50V
1x Nichicon UKA0J221MED 220uF, 6.3V
4x Nichicon UFG1E101MPM1TD 100uF, 25V
2x Nichicon UES1H470MPM1TD 47uF, 50V
3x Nichicon UKA1A330MDD 33uF, 10V
3x Nichicon UKT1V100MDD1TD 10uF, 35V
4x Nichicon UFW1H4R7MDD 4.7uF, 50V
4x Nichicon UFG2A2R2MDM 2.2uF, 100V
6x Wima MKS2C042201K00JO00 2.2uF, 63V
1x Nichicon UFG1H2R2MDM1TA 2.2uF, 50V
8x Elna RFS-50VR47ME3#5 0.47uF, 50V

​

i hope thats all of them

 

[Semanon]

i hope thats all of them

I never get away with only one order...

I like to replace electrolytic caps 3.3uF and below with film caps. IF THEY FIT. Smaller ones almost always do. 2uF and above need to be measured carefully.

 

[Semanon]

BTW, good work. With a recap it should be good for another few decades!