• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Audio Karma Glossary

I spent a while today before I was able to divine the meaning of MTM (as in mid-tweeter-mid design for speakers). Maybe this and other speaker design designations could be added?
 
I take it is not a good thing to refer to speakers as Kabuki or kabukied but being fairly new here I don't know what it means and um wiki is no help either must be an AK term.........:scratch2::tresbon:

I took a shot at a definition and included it in the original glossary page. If anyone wants to offer suggestions, please post them.

Kabuki - A derisive term for speakers built with multiple drivers, one of which is usually at least 12" to 15." Such speakers usually appear to have been built for the impressive appearance rather than impressive sound.
 
I spent a while today before I was able to divine the meaning of MTM (as in mid-tweeter-mid design for speakers). Maybe this and other speaker design designations could be added?

If one of the speaker gurus is willing to speak up and describe a purpose for this design, it could be included in a definition. Please?

Regards,

D-Ray
 
Hmmm . . . I wonder if we need to include a definition of spam in the glossary. I do believe that the definition of thread-crapping fit the above. Home theater furniture. Who invited Martha Stewart? :nono:

Regards,

D-Ray
 
Hmm, I never saw this before, great thread. :thmbsp: May I add a couple/few, just in case others aren't familiar? YMMV= Your mileage (opinion or experience) may vary, ROTFL= Rolling on the floor laughing, TMI= Too much information, flipper= One whose primary goal is to resell gear for a profit, with no real appreciation for it. That's just a quick post, I can probably think of more later. :smoke:

Hey, I take offence to the flipper one.

drop the "with no real appreciation for it" part, and its ok, but with the amount of bills I have, I sometimes flip to bolster my income, and I have a strong appreciation for audio.
 
call'em "sharks"

Hey, I take offence to the flipper one.

drop the "with no real appreciation for it" part, and its ok, but with the amount of bills I have, I sometimes flip to bolster my income, and I have a strong appreciation for audio.

to flip in the singular occasionally np, consistently with only inflated $$ in your eyes makes you a shark.
 
Thanks for adding to the definitions. It certainly helped overcome a personal level of ignorance. For L-pad, I kept picturing an L-shaped device, but I had never seen one on a speaker. Now that I've seen the definition, I have a few.

I'll leave scroe in the definitions for now, because a there are plenty who will wonder what it is when they read a post, but maybe enough will read the thread to understand the concerns as well.

Regards,

D-Ray
Coming from an electronics background, I always understood L-pad to have come from the circuit diagram of it as a fixed-value atentuator. The series resistor is drawn across the top horizontally, then from the right a resistor is drawn down vertically, making an inverted L from the resistors. This circuit is often used in crossovers of multi-way speakers to reduce sensitivity of a midrange driver or tweeter to match the lower sensitivity of the woofer. The midrange or tweeter control on a speaker is just an L-pad implemented as a potentiometer/rheostat.
If one of the speaker gurus is willing to speak up and describe a purpose for this design, it could be included in a definition. Please?

Regards,

D-Ray
Here's my attempt. How long should an entry be? I think the first two sentences here should describe it enough so people will know it when they see it. The last is the reasoning behind it as I understand it.

MTM - a speaker driver configuration in which a tweeter is mounted in between two identical midrange drivers (or sometimes woofers) vertically, thus the Midrange-Tweeter-Midrange or MTM name. Also called the D'Appolito Configuration after its designer. The design theory is that the midrange sound "appears" midway between the two midrange speakers, at the same point where the tweeter emits sound, preventing phase change or cancellation between the midrange and tweeter when the listener is off-axis vertically.
 
This was one undertaking. I never could figure out ymmv. And a Troll I thought was someone in a thread looking to lure someone into an argument. Maybe I was close with that one guys.
Forgot one: FUBAR

It's an old Navy slang term. Can anyone guess or did I miss it in the OP?
 
This was one undertaking. I never could figure out ymmv. And a Troll I thought was someone in a thread looking to lure someone into an argument. Maybe I was close with that one guys.
Forgot one: FUBAR

It's an old Navy slang term. Can anyone guess or did I miss it in the OP?

F[ouled] Up Beyond All Repair. Similar to SNAFU - Systems Normal All F[ouled] Up.

Thanks for your contribution.

Regards,

D-Ray
 
Great thread! Used sparingly, the acronyms are convenient, but I hope they aren't over-used. In the old days of telegraphs/telegrams, one paid per letter, so abbreviations were common in "telegraphic English," to save money. In the early days of mobile phones and computers, memory was limited and expensive, and messages had to be shortened. It is still convenient to shorten text messages sent by phone and read on small screens.

However, for forum posts and email today, there is no need --neither technological nor economic-- to over-shorten things, and meanings are clearer when things are written out. Full-signal analog still trumps compression, when it comes to communication quality! :D So use the acronyms sparingly; please don't OVER-use them!

Similarly, PLEASE do not use non-words like "gonna," "kinda," and "prolly." It makes things ugly, less clear and distracting, for anyone who is literate. Not everyone even speaks that poorly, and no one should write that way, unless it is to deliberately show a particular accent or speech pattern in directly-quoted speech - for example, in a screenplay.


I'm guessing... Big, Dumb Mother-F**ker ?
... sort of like a guy you might see pictured in someone's avatar?
(He says, ducking and running quickly for cover... :D)

BTL=Balanced Transformer-less
WTB= want to buy (?)

;-)

BTL I would interpret according to context; I think it might sometimes be a variation of BOTL. ... or maybe a mixed-up BLT? :D


My ex-wife would confuse an expression I have never heard from anyone else... not even on AK. She would actually say "it ceases to amaze me". Why is it some people slap words together and articulate them without even thinking?

"It never ceases to amaze me" is a long-established, even cliched statement. "It ceases to amaze me" would make sense in an opposite context, but it is not a cliche.
 
Last edited:
OK, I'll add my pet peeve...

DAMP v. to absorb energy. Example: "I added 15lbs of cinder blocks to the top of my speaker to damp the vibrations of the flimsy panels."

DAMPEN v. to make wet. Example: "What's the best way to dampen the wires in my tonearm to control resonances?" The only answer would be, "Wipe them with a sponge soaked in water, that should make them wet but it won't help the resonances."

No so! Both terms ARE interchangable: In physics, damping is any effect that tends to reduce the amplitude of oscillations in an oscillatory system, particularly the harmonic oscillator. To take this action is to dampen. Check the second definition in any dictionary. True for audio equipment and motorcycle shock absorbers.

NOS: New old stock. Unused parts made during the original production and intended to be used for the manufacture of the original equipment or product.
NORS: New old replacement stock. Unused parts made during the original production and intended to be used for replacement (repair) of the original equipment or product. These parts can vary from the original design due to upgrades or changes in manufacturing.

What is "Beaming"?
 
Last edited:
:drunk: :D Jim Beaming (low to mid fi bourbon) Sorry, couldn't help it.
I'm with Arkay on the overuse of accronyms. Succinctly put, Arkay.
 
I didn't see TU or Tango Uniform (Tits-Up), often used by repair technicians in reference to complete failure, in the list. I believe this one has military aviation origins.
 
I'm trying to think of an acronym I've seen here and another hifi/audio site, I think it it describes the "musicality" of a system or some such. It's an acronym of three or four words, and at least one of them is tempo, beat or pitch. I recall it being slightly controversial for some people who might look down on its use because it doesn't describe anything technical about the sound, or give a hint about what could be improved.

And about TU, if you're speaking in an all-ages group or in "polite company," it stands for "Toes Up."
 
PRaT: Pace, Rhythm, and Timing


---
- Sent from my iPhone using Tapatalk
 
Back
Top Bottom