• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Current production 6CA7 tubes

I stockpiled 6K11, 6BK11, and 6C10s for the amps. Too bad these were developed kinda late in the history of vacuum tube manufacturing. :(

Same here. Although, for myself, there was always limited demand for these types, even in heavily used (and abused!) Ampegs. They always seemed to be very rugged and long-lived tubes. I've always been a big Compactron fan. Even back in my TV days, they gave minimal trouble :)
 
Same here. Although, for myself, there was always limited demand for these types, even in heavily used (and abused!) Ampegs. They always seemed to be very rugged and long-lived tubes. I've always been a big Compactron fan. Even back in my TV days, they gave minimal trouble :)
Yes, for whatever reason, they are less susceptible to getting noisy and microphonic, than the standard duo-triodes.

Tought tubes, for sure!
 
I stockpiled 6K11, 6BK11, and 6C10s for the amps. Too bad these were developed kinda late in the history of vacuum tube manufacturing. :(
Wasn't it GE that first came up with the compactron? I seem to remember reading something about it. They were meant to help extend tube sales for them for a couple more years since transistors had already pretty much taken over.
 
interesting they marked it as a 7581/KT66. KT66 is rated for 25 watts, 7581A is good for 35. I guess its otherwise close enough to sub, and with 10 watts higher plate dissipation there isn't much concern of it being damaged in a KT66 circuit.

I thought the 7581A was also supposed to be a sub for a 7027A if you allow for the duplicated connections on a 7027A socket.
 
interesting they marked it as a 7581/KT66. KT66 is rated for 25 watts, 7581A is good for 35. I guess its otherwise close enough to sub, and with 10 watts higher plate dissipation there isn't much concern of it being damaged in a KT66 circuit.

I thought the 7581A was also supposed to be a sub for a 7027A if you allow for the duplicated connections on a 7027A socket.
GE 7027A! Yummy!

I think GE started labeling the 7581A boxes with KT66, since the British KT-66 was pretty expensive (relatively) in those days. :idea:

e2709ecc-7f07-4f73-aeb5-f4ab12b13587.jpg
 
My DS-265 has GE-produced 7027A with Realistic labels. Two tall bottle, two short bottle. Thats probably going to be the next set of spare tubes to hunt down. I think its currently my only amp without a backup set. Should probably get some GZ34 as well, it runs three and the DS-225 has a pair. My Fisher 600 uses one, so does my Magnavox.
 
Interesting discussion. I'm a bit late to the party tho. I just bought a pair of the EH 6CA7 and they actually look more rugged than the USA Westinghouse quad I have. Getting ready to try a pair in my newly built amp and see how they shine! I gotta agree on the EL34 Tung Sol. They sound crisp and lively as mentioned above, but I do think the 6CA7s have a little better bottom end. They are a little tired but still very alive. They insides look totally different than the EL34s. I have quads of the Realistic KT77s that I ran in a couple Dyna ST70s and they did well. Siemens I think. Forget the China made tubes. As mentioned, short lives, blown fuses and all kinds of unpleasant excitement. Have a set of Russian 6550s in a Mk3 and have run the snot out of them and stayed strong. Put away some years ago when my toddler decided to use the speakers for a punching bag. She's 21 now - and uses ME for a punching bag! ;)
 
Interesting discussion. I'm a bit late to the party tho. I just bought a pair of the EH 6CA7 and they actually look more rugged than the USA Westinghouse quad I have. Getting ready to try a pair in my newly built amp and see how they shine! I gotta agree on the EL34 Tung Sol. They sound crisp and lively as mentioned above, but I do think the 6CA7s have a little better bottom end. They are a little tired but still very alive. They insides look totally different than the EL34s. I have quads of the Realistic KT77s that I ran in a couple Dyna ST70s and they did well. Siemens I think. Forget the China made tubes. As mentioned, short lives, blown fuses and all kinds of unpleasant excitement. Have a set of Russian 6550s in a Mk3 and have run the snot out of them and stayed strong. Put away some years ago when my toddler decided to use the speakers for a punching bag. She's 21 now - and uses ME for a punching bag! ;)
definitely post when you've had some time with the EH!

i have to say, this thread turned out to be WAY more fun than i expected. i'm happy the discussion took on a life of its own :)
 
I just refuse to pay huge money for some storied and increasingly unobtainable tube. I seriously wonder if no small part of their supposed greatness is the scarcity.

With the 'real' Svetlana tubes...nope; they were/are quite good. IMO, YMMV, Subject to change without notice...and so forth...:)

Douglas
 
I have yet to try out the quad of Westinghouse 6CA7 tubes that were gifted to me. Anyone have any experience with the Westinghouse branded ones?
Westinghouse 6CA7 tubes A (1).JPG
 
Back
Top Bottom