Hinges for a Technics SL-D2?

[krautmaster]

"Turntables by CTH" makes some aluminum ones that work on many Technics tables:

Turntables By CTH

Discover vintage Technics turntables, expert repair services, and unique vintage audio equipment at Turntables By CTH. Shop now!

turntablesbycth.com

 

[TomInTacoma]

"Turntables by CTH" makes some aluminum ones that work on many Technics tables:

Turntables By CTH

Discover vintage Technics turntables, expert repair services, and unique vintage audio equipment at Turntables By CTH. Shop now!

turntablesbycth.com

The aluminum ones you're referring to aren't hinges - they are dust cover repair parts. They replace broken tabs on the back of Technics (and some MCS) dust covers.

 

[gio4]

I have exactly the same issue. I am wondering if it is not possible to tighten them in a way?

Finally I find a really easy, smart and useful as well solution. I put tiny magnets in the upper behind corner. I used magnet of 2 gramms or so and I put there 4 pairs. So I added approx. 16 gramms. In the behind part of the cover when it is open.

 

[drummergrl]

Finally I find a really easy, smart and useful as well solution. I put tiny magnets in the upper behind corner. I used magnet of 2 gramms or so and I put there 4 pairs. So I added approx. 16 gramms. In the behind part of the cover when it is open.

Can you put a link to these magnets please? Thanks.