JBL C36 Capacitor question

[Donkey Karma]

Looking for the value of the caps for the tweeter.

Cap dosent indicate. That I can decipher.

Any help would be greatly appreciated.

TY in advance.

 

[NAD80]

Hi Donkey Karma. Is there anything else on the capacitor? Can you post any more pics of the crossover/ and parts? Did find the company Chicago Condenser Corp. Also you can look over at Lansing Heritage web site (JBL,Altec Lansing speakers). I didn't find anything real quick.

 

[Donkey Karma]

Hi Donkey Karma. Is there anything else on the capacitor? Can you post any more pics of the crossover/ and parts? Did find the company Chicago Condenser Corp. Also you can look over at Lansing Heritage web site (JBL,Altec Lansing speakers). I didn't find anything real quick.[/QUOTE

Thanks NAD!!

I found on the Heritage website. 6uf.

Thank you again!

 

[NAD80]

You're welcome. After the speakers are finished, could you post pics of the speakers and the crossovers. And would like to know how they sound after the rework . thanks.

 

[dc270]

N2600 crossover originally. It shoul cross at/near 2600 hz, If these are 8 ohm drivers the a 7.5 microfarad cap should be close. 100 or more voltage rated, non-polar film type would be a good replacement IF yours does not measure well. Never had to replace those type aps!
DC