• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Klipsch Modifications

Mike Gibson

Modulator
Staff member
Super Mod
Subscriber
This thread is for Klipsch technical talk and modifications only please. If it evolves into a chit chat thread then it will be closed. I just wanted you folks to have a purely technical thread about your speakers and modifications. Thanks and welcome to AK.
 
Register to hide this ad
Really, no chit chat? WTF, LMAO. Seriously, thanks Mike, we're just a bunch of orphans that might have something to offer to the group.
 
No chit-chat, geez. I guess we will have to be invited to each other's home to have real fun.
 
On the CW4 Klipsch uses a pair of 2 x 4's from the front to back at the 10:00 and 2:00 position about 2" past the woofer cutout. A solution that works well and has been used on their pro KPT-456 and KPT-904 double 15" woofer cabinets.
 
This thread is for Klipsch technical talk and modifications only please. If it evolves into a chit chat thread then it will be closed. I just wanted you folks to have a purely technical thread about your speakers and modifications. Thanks and welcome to AK.
Thanks for giving us some space. As I may (perhaps) be the most prolific of Klipsch MODDERS, I am grateful for the opportunity to interact TECHNICALLY with everyone here.
 
Chorus 1 bracing & port mods :king:
(did the same mods to two pairs of 1's)

Typically, when I brace, I'll sand the brace contact points to bare wood for good glue adhesion. You may have done that I can't tell. If not, you're relying on the paint adhesion to the wood and glue adhesion to the paint to hold it together
 
Typically, when I brace, I'll sand the brace contact points to bare wood for good glue adhesion. You may have done that I can't tell. If not, you're relying on the paint adhesion to the wood and glue adhesion to the paint to hold it together

Agreed. I traced the outline of the brace with a #2 pencil, & only sanded inside the lines (hard to see in the pics)
 
If it evolves into a chit chat thread then it will be closed.
I'm scared to say anything.... Haha! I might get in trouble and have to go to the principal's office. I have 1980 Cornwalls, but they came with Crites 120 tweets and B-2 crossovers made with the big fat metal caps from way back when. Should have B style crossover. B-2 didn't come along until 1981.
 
Bi-amped series 1 Heresys

20180708_120300.jpg

20180708_120908.jpg

20180708_121436.jpg

20180708_121345.jpg

Utilized the original binding posts to facilitate moving the bass drivers conductors
20180708_121520.jpg

20180708_121321.jpg

20180708_120455.jpg

Vertically bi-amped with twin Dynaco ST120 rebuilt with computer grade Mallory caps, go big or go home lol
image-54.jpg


20161125_093526.jpg

Using twin Dayton Audio Sub 1200's connected in stereo as stands preserves the Heresy sound only BIGGER now with 25hz on tap
 
Heretical ship of Theseus:
This:
n7JEOfy.jpg

became this:
hRvQj6M.jpg


Which became the Super Heresy 1.0:
yxuwk3m.jpg


and is now the Super Heresy 1.5, which shares components from the modded speakers, but has no parts in common with the original, 1971 H700s that I began with in August.
ySoqqV6.jpg
 
This thread is for Klipsch technical talk and modifications only please. If it evolves into a chit chat thread then it will be closed. I just wanted you folks to have a purely technical thread about your speakers and modifications. Thanks and welcome to AK.
No Chit Chat here
What are the best mods to seal my Khorns
I have perfect corners but have read foam or rubber can help seal the corner ?
Any pics would help
Thanks.
 
Back
Top Bottom