Looking for a volume control for an SX-950...

[NJAudio]

I've been searching for an ACV-164 to replace my SX 950 volume control which has a snapped shaft.
Does anyone have any idea's?

 

[john stumpf]

sometimes its possible to mend them,there have been several writeups here about that. i myself repaired a qx949 volume control. i robbed the shaft from another pot and joined it by drilling a hole in the replacement and the stub of the existing then epoxied it using a bit of allen wrench as "rebar". some people have even swapped the shafts. other wise its ebay,it might pay you to check the part numbers to see if if its the same as other pioneers like the 1050 or 850. the reason being that some ebay sellers (but not many) list controls by the set model number not the part number. maybe barter town has a seller too

 

[merlynski]

You can also become a Subscriber AK member and post a Want-to-Buy in the Bartertown section.

 

[Watthour]

You can possibly un-snap the shaft as John advises:

https://audiokarma.org/forums/index.php?threads/another-pot-stem-repair.393623/