• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

Agreed. the surface must be prepped as if spraying paint.
I seal with a couple of coats of shellac, sand lightly then clean with a Tack cloth thoroughly.
The material is very forgiving if you have some application problems. It can be peeled back and corrected using a Hair dryer or heat gun.
If you don't like the look, it peels right off.
They also have "peel off" paint you can try. I've sprayed chrome bumpers on my Ford Expedition for that "Blackout" look.
Would sanding sealer do the trick?
(BTW my 'PA' cabs are for home use only now and haven't seen the road in ages so the vinyl wrap would be sufficient)
 
Well, after being pretty happy with some of the vintage 12" drivers on my H frames, I decided a should try some vintage 8" drivers as I don't have to worry about Bass with the 15" subs.

Ordered a pair of Philips ad3800 and a pair of philips ad8080. Anyone have any experience with these? They look pretty great and the few videos on YouTube look promising.

Now to go clean the house and buy my wife something nice before she finds out...:whip::)
 
Would sanding sealer do the trick?
(BTW my 'PA' cabs are for home use only now and haven't seen the road in ages so the vinyl wrap would be sufficient)
Sanding sealer is fine. It performs the same task but has a longer drying time. Make sure it's dry before sanding.
 
Well, after being pretty happy with some of the vintage 12" drivers on my H frames, I decided a should try some vintage 8" drivers as I don't have to worry about Bass with the 15" subs.

Ordered a pair of Philips ad3800 and a pair of philips ad8080. Anyone have any experience with these? They look pretty great and the few videos on YouTube look promising.

Now to go clean the house and buy my wife something nice before she finds out...:whip::)

That's what I like about the H Frame's. It's "Plug and Play" with top end!
ENJOY!!!!!!!
 
When the audio Gods hand you drivers what else to do is but build speakers . I have been interested in building a set of OB for some time now . I have a pair of Altec 806a 16 ohm drivers on h-811 b horns and a pair of EAW 804071 8 ohm 15 " woofers . I would like to do a two way speaker using a MINI DSP 2X4 as a active crossover any suggestions would be helpful altec horns 002.JPG
 
I'd give the JE labs baffles a shot. He does a lot of stuff with vintage Altec stuff, and often tests new drivers on those baffles. Google "JE labs" and it should direct you to his website. There's a ton of different combos he's tried, as well as some BEAUTIFUL tube amps he's designed and built.


Or just build some A7s.
(I will do it someday...)
 
I landed several vintage Eminence alnico bass(?) drivers... 15 inch, 8 ohm. The alnico magnets are huge.
How would these do in OB when paired with a tweeter?
 

Attachments

  • IMG_20170707_180719082.jpg
    IMG_20170707_180719082.jpg
    70.2 KB · Views: 38
  • IMG_20170707_180755994.jpg
    IMG_20170707_180755994.jpg
    105 KB · Views: 36
  • IMG_20170707_180828038.jpg
    IMG_20170707_180828038.jpg
    71.3 KB · Views: 38
  • IMG_20170707_180833868.jpg
    IMG_20170707_180833868.jpg
    69.5 KB · Views: 40
Looks like an instrument speaker for Organ or Bass. You don't often see 15" guitar speakers.
Have you tried it free air just to see how it does in the mid-range?

Some nice info on the Eminence site btw, not only for their speakers but speakers in general.
Maybe an eMail to Eminence could get you the information you need.
http://www.eminence.com/support/faq/
 
Looks like an instrument speaker for Organ or Bass. You don't often see 15" guitar speakers.
Have you tried it free air just to see how it does in the mid-range?

Some nice info on the Eminence site btw, not only for their speakers but speakers in general.
Maybe an eMail to Eminence could get you the information you need.
http://www.eminence.com/support/faq/

These were mounted in pairs in large "bass bins" (?). I have been listening this morning with one connected to my system. Certainly puts out nice bass but the high end frequencies are muted.. not silent, but definitely muted. Midrange is decent... at least to these old ears.

Thanks for the eminence link.
 
Another day, another driver test. Today, I'm playing with a pair of Philips AD3800M/06 8" full rangers I got off the bay through a cheap TPA3116 integrated. I'm currently listening to them in free air through a cheap TPA3116 integrated. So far, I REALLY like what I'm hearing. Smooth all the way up through the high frequencies and a sense of air about the instruments. No tweeter needed- and that makes me a VERY happy camper. I hate running a tweeter for some reason- I just can't seem to get them to integrate well. I'll be cutting some baffles at Lowes while the kids nap today so I can hear them properly. Clean highs were just something I couldn't get with the 12" full rangers.
I'm getting the feeling that it's kinda hard to screw up an open baffle to the point where it's unlistenable though.

Some findings between 12" and the smaller (6.5"-8"):
1. There are trade offs- you give up dynamics with the 12" for the airy and clean highs of the 8"
2. Higher crossover point with subs really helps make a big difference in the coherence of the sound.
3. if you have a smaller listening space (Mine is 14w x 22l x 8h) smaller drivers seem to image better and seem more realistic in the space the occupy.

Are these revolutionary findings that we didn't already know? Not really. But I did find out what people talk about when they mentions the points above. With that knowledge, I should be able to discover the sound I've been looking (listening?) for all along.

This stuff is just too fun. I've spent a lot less on testing 5-6 different driver combinations than I would have buying a pair of box speakers that give the same performance. You really can tailor open baffles to what YOU like or want out of a speaker.

Don't let the looks fool you. They sound pretty remarkable. :)

philips.jpg
 
My Zeniths are still with Bud getting their Enabl treatment. In the meantime I ordered an open baffle flat-pak from Caintuck Audio. It is really nice sapele hardwood and came with an 11" cutout for the drivers. I just finished rubbing a second coat of linseed oil and beeswax onto them. I'm psyched to get the drivers back.

If anyone is curious about the general sound of OB's here is a cool youtube video which compares. Once you get used to that "open" sound it is tough to go back to boxes.

 
Another day, another driver test. Today, I'm playing with a pair of Philips AD3800M/06 8" full rangers I got off the bay through a cheap TPA3116 integrated. I'm currently listening to them in free air through a cheap TPA3116 integrated. So far, I REALLY like what I'm hearing. Smooth all the way up through the high frequencies and a sense of air about the instruments. No tweeter needed- and that makes me a VERY happy camper. I hate running a tweeter for some reason- I just can't seem to get them to integrate well. I'll be cutting some baffles at Lowes while the kids nap today so I can hear them properly. Clean highs were just something I couldn't get with the 12" full rangers.
I'm getting the feeling that it's kinda hard to screw up an open baffle to the point where it's unlistenable though.

Some findings between 12" and the smaller (6.5"-8"):
1. There are trade offs- you give up dynamics with the 12" for the airy and clean highs of the 8"
2. Higher crossover point with subs really helps make a big difference in the coherence of the sound.
3. if you have a smaller listening space (Mine is 14w x 22l x 8h) smaller drivers seem to image better and seem more realistic in the space the occupy.

Are these revolutionary findings that we didn't already know? Not really. But I did find out what people talk about when they mentions the points above. With that knowledge, I should be able to discover the sound I've been looking (listening?) for all along.

This stuff is just too fun. I've spent a lot less on testing 5-6 different driver combinations than I would have buying a pair of box speakers that give the same performance. You really can tailor open baffles to what YOU like or want out of a speaker.

Don't let the looks fool you. They sound pretty remarkable. :)

View attachment 963751
I guess they knew "a little bit" about what they were doing with HiFi back in the day.
My next "audition" will be just the CZ49's with sans Tweeter.
 
Well... it was bound to happen at some point. I was putting the last screw in the last driver and my hand slipped off the handle of the screwdriver and sent it into the cone creating a 2" long gash in the cone. after a sharing a few words with myself and the screwdriver, I grabbed the craft glue and some water and made a watery paste. Was able to get the driver cone back together and functional. I can't detect a bit of distortion or flappy sound, so I'm chalking this up as a DIY win--Even though I feel like a complete idiot.

Anyway, I got these things all hooked up and are currently making music.
 
It's the universes way of telling you to learn DIY Enabl'ing on that set of drivers. :)

I've had that happen to me once when I was remounting the woofers of an EPI 100. And this was right after putting on new foam surrounds - Ugh!
 
Ouch. Sorry about the driver!

This is the value in hex head and square head drive screws. Less likelyhood to slip off. But in all cases, I always wrap my hand around the shaft of the driver and the screw so if I slip, it's my hand taking the punishment. You can't cover it all the time, but every moment I'm protecting the driver, the better in my way of thinking.

EV3
 
I jumped back in the OB game too. I bought some vintage Utah/Allied alnico drivers. I used the old OB boards from a build I did a few years ago. Bolted up the drivers without tweets. I'm impressed with this 12" whizzer coned driver. A pair of Zeniths will be here tomorrow. I'll try them next.
 
Back
Top Bottom