• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

thinking of buying one of those amps in a box (2x50w) to drive my woofers. The 275 puts out lots of heat.
 
IMG_1337.JPG IMG_1338.JPG Here's my latest. Made it from left over baffles. Drivers are Utah/Allied that came with tweeters and simple xo. I have no idea what they were in before but, they are very efficient. The 2A3's push them no sweat. I can run with or without the tweet/xo. So far I like it with the tweeter. Cheap fun!!!
 
Thanks! These are the baffles I had that were 48" tall with 15a's mounted at the bottom. I cut the 15a/18" part off so I can make H-frames from them. I'm not sure I even need the H-frames.
The OB's are now are 28x30 unfolded.
 
Playing with more Philips full rangers.
I've got a pair of AD 8080s I won through the auction place. These 8" drivers with whizzer cones sound great on my h frames with no tweeter. They start to roll off higher than I'd expected, but it makes for a pretty smooth sound. It's currently 1965 and Ben Webster is standing in front of me and I'm surrounded by the audience.

Pretty freaking pleased right now.

The paper surrounds on the cone are VERY thin and have a couple of hairline fractures in the paper. The rest of the cone is in great shape. I was thinking thinking about using some fabric glue (so it remains perfectly pliable) and thinly coating the surround to close the time holes and prevent any more tears from forming. Does anyone think that it would make a difference in the sound and return it closer to stock?
 
I've got a pair of 8" with whizzer cones that I pulled out of a pair of Jensen Model 1s. I really need to replace the surrounds and try them in an open baffle. I listened to them for a few minutes before I pulled them out of the cabs and they sounded pretty nice.
 
Using this $79 Behringer CX-2310 active crossover with the DX3/Alphas but only on the Alphas. In addition to filtering the highs from the Alphas it controls the gain and crossover for a sealed subwoofer. With the rack ears removed it looks less like pro-audio.

behringer-super-x-pro-cx2310-949855.jpg
 
I'm powering the Lowther DX3 with Bottlehead 2a3 mono blocks and the Alphas with this $9 dual chip TPA 3116 and $30 Pyramid regulated PSU.

P7250006.JPG
 
Playing with more Philips full rangers.
I've got a pair of AD 8080s I won through the auction place. These 8" drivers with whizzer cones sound great on my h frames with no tweeter. They start to roll off higher than I'd expected, but it makes for a pretty smooth sound. It's currently 1965 and Ben Webster is standing in front of me and I'm surrounded by the audience.

Pretty freaking pleased right now.

The paper surrounds on the cone are VERY thin and have a couple of hairline fractures in the paper. The rest of the cone is in great shape. I was thinking thinking about using some fabric glue (so it remains perfectly pliable) and thinly coating the surround to close the time holes and prevent any more tears from forming. Does anyone think that it would make a difference in the sound and return it closer to stock?

Haven't tried it but I see others using the "tea bag repair".
 
realization of a digital set up through a Wi-Fi router from network storage.
 

Attachments

  • 3254458.jpg
    3254458.jpg
    59.3 KB · Views: 30
  • 3438276236.jpg
    3438276236.jpg
    22 KB · Views: 26
  • FX-D802-USB.jpg_640x640.jpg
    FX-D802-USB.jpg_640x640.jpg
    45.5 KB · Views: 26
  • HTB1WxAqKFXXXXcyXVXXq6xXFXXXE.jpg
    HTB1WxAqKFXXXXcyXVXXq6xXFXXXE.jpg
    113.9 KB · Views: 25
  • P1080115.JPG
    P1080115.JPG
    53.6 KB · Views: 26
  • P1080116.JPG
    P1080116.JPG
    59.3 KB · Views: 25
  • P1080117.JPG
    P1080117.JPG
    24.8 KB · Views: 25
  • P1080118.JPG
    P1080118.JPG
    81.1 KB · Views: 25
  • P1080120.JPG
    P1080120.JPG
    54.9 KB · Views: 25
  • Pi3_1500.jpg
    Pi3_1500.jpg
    119.3 KB · Views: 25
Back
Top Bottom