• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

Hi Jeff.
They sure have excellent reviews. I believe they use two Eminence drivers with a compression tweeter mounted piggy back on one. They remind me of the earlier model Emerald Physics OB's which also used inexpensive off the shelf Eminence drivers. I doubt they have much competition at their 2K price point.

If you don't want the hassle ( or fun ) of diy I think they would be a good choice.
 
Hey Poultry,
I have acquired some nice Corian shelves, intending to use them for open baffle - baffles. I only want to cut them out once for the best design. So please let me know what you'd suggest (options below).
I have pairs of
  1. Fostex 208 sigmas and
  2. WHARFEDALE 12/FS/AL drivers.
What would you recommend?...
  1. Both a Fostex and a Wharfedale on 1 panel (if yes- what should the crossover be like?); or
  2. a Fostex 208 sigma alone on one panel; or
  3. a WHARFEDALE 12/FS/AL on one panel
Thanks.
 
The Fostex and Wharfdales are very good full range drivers. You can use either as your main drivers and augment them with bass drivers like the Eminence Alpha 15A.

With my Lowthers over double Alphas I went with 48" x 20" baffles and can't imagine them sounding any better.

Can't find specs on the Wharfdales but they may have some bass on their own ( the 208's are lacking there ) so you might try them in the JE Labs mock ups before cutting final baffles.

http://jelabsarch.blogspot.com/2012/06/open-baffle.html

If you want to do 2 ways I'd suggest bi-amping with an active crossover.
 
Hey Poultry… or anybody using the Zenith CZ49s.

I have the CZ49903 version. They do sound really good.
But I want to try adding tweeter to get just a wee bit more out of the top end.

What are some tweeter recommendations any of you might have.
I'm eager to try something soon so I'm leaning toward something readily available, but I am open to all suggestions.
I'm just gonna do a simple 1 cap crossover.
 
Assume you meant 49CZ903? My Zenith 49CZ802 has a different motor but the basket looks the same. The 49CZ8** series play pretty high and sound excellent even without a tweeter. I removed a pair of Japanese made Realistic 40-1301A super tweeters from their plastic pods so they could radiate to the rear for OB use. I use a single 1.0 uF cap with these tweets.

P1010026.jpg
 
My Realistic tweets look like the Radio Shack versions but are all metal with a different motor. The Realistic 40-1310A was made in Japan by Fostex. The later model B and C ( I have those as well ) were made in Korea and China. All these pod tweets have escalated in price but the model A is getting difficult to find.

Radio-Shack-40-1310-Super-Tweeters.jpg
 
With these efficient console speakers it's important to pair them with highly efficient tweeters. I'd only consider tweeters rated above 100 dbs and unfortunately that makes the choices more limited.
 
might seem silly. I've been driving the Alpha's with a Mac 275 and bass has not been all that great. I'm thinking I can try the 2a3 mono blocks to drive these woofers as sensitivity is in the mid ninety's. Now the bass is really coming around. I'm liking this.
 
might seem silly. I've been driving the Alpha's with a Mac 275 and bass has not been all that great. I'm thinking I can try the 2a3 mono blocks to drive these woofers as sensitivity is in the mid ninety's. Now the bass is really coming around. I'm liking this.

So you like the 2a3 SET driving the Alphas?
 
While I still use a TPA3116 to drive the H-frame Alphas now it's this one paired with a Nobsound NS-O1P tube preamp ( not this Aric pictured here ). The TPA with this Astron psu probably makes 15 to 20 watts. Helped by the preamp's gain the Nobsound runs comfortably at 12 o'clock. For greater volume with low level recordings I might hit 3 o'clock. In addition to the Nobsound tube preamp for the LF I use a Bottlehead tube preamp with the Magnavox EL84 SE with the HF.

P7250001.JPG
 
I'm still using a SET 45 for the FR. Wall of sound. My outdoors chore's finished around noon, the temps headed towards triple digits. Wife's in the city and reason enough to spin some vinyl.
 
Hello all-This is my first post here, I've enjoyed this thread very much. Thank you guys!....anyway, I decided to order a pair of wild burro's and built a baffle in similar dimensions to Caintuck audio. Wow is all I can say, this open baffle sound is for me. I love the tone. The grills I made are because I have a young family, pets too. They are removable, but I actually like them on....Associated equipment is a well tempered Amadeus>D-103>A-23 step up>Shindo Auriges>Vac pa 35/35. I use Belden and WE wire. I use and love Devore super 8, but this is a new sound that I love.
 

Attachments

  • IMG_0202.JPG
    IMG_0202.JPG
    58.4 KB · Views: 85
Thanks Poultry.
Yes I meant 49CZ903. I'm really liking these things in my early days of playing with them!
RE the B and C versions of the tweeter, do they sound a lot different than the A version?

Also thinking I might try the Goldwood paper cone tweeter that Glow In The Dark Mentions.
 
Hello all-This is my first post here, I've enjoyed this thread very much. Thank you guys!....anyway, I decided to order a pair of wild burro's and built a baffle in similar dimensions to Caintuck audio. Wow is all I can say, this open baffle sound is for me. I love the tone. The grills I made are because I have a young family, pets too. They are removable, but I actually like them on....Associated equipment is a well tempered Amadeus>D-103>A-23 step up>Shindo Auriges>Vac pa 35/35. I use Belden and WE wire. I use and love Devore super 8, but this is a new sound that I love.

Nice! :thumbsup:
 
I think this qualifies as among one of the best first posts:thumbsup:
Would love to see a few more pictures of a job well done.
Welcome to AK, btw.
 
Back
Top Bottom