• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

These look interesting for anyone wanting to just screw in a pair of drivers with the baffles already made:

US $419 | IWISTAO Module Combination Empty Baffle Speaker Tenon 10 inch Bass 4 inch Tweeter Surface Horn Floor Passive Speaker Solid Wood
https://s.click.aliexpress.com/e/nAOSLPa

These 18" monsters look interesting too:

US $198 | F-103 HiFi 18"inch Full Range speaker Y35 aviation magnet loudspeaker AS Full paper basin speaker 16 Ohm Aluminum frame speaker
https://s.click.aliexpress.com/e/b3mE2WLm
 
Last edited:
Mmmm, I may change the bullet tweeters for Fountek NeoCD3.5H Horn Loaded Ribbon Tweeters. I'm missing the fine, nuanced treble I got from my Aurum Cantus ribbons. Then again, that may not be efficient enough.

Maybe I just should let everything burn in and see how it goes. Besides, I need to sort out the speaker cloth for the back of these and restain the cabinet to more closely match my entertainment unit.
 
I've noticed it's more a test of the recording equipment than the system with such things unfortunately..... And my Chinese phone sucks for recordings :(
 
Guitar speaker enthusiast have praised alnico speakers for years. And today most modern alnico drivers are produced for use in guitar speakers. Don't know why there aren't more in home speakers but regardless there's something special going on with them. To my ears it's their gorgeous tone and the only descriptive word I can come up with is "sweet". I now have three pair of alnico speakers and I absolutely love them all. The little Coral Holey Baskets just kill anything I've heard from Fostex and the 8" and 12" Zeniths are in a class by themselves. If you're new to alnicos they are called that due to the material composition of their motors i.e. aluminum ( Al ), nickel ( Ni ) and cobalt (Co ).

wrwkbv2s0ujs8lkuikkn.jpg
 
Last edited:
Guitar speaker enthusiast have praised alnico speakers for years. And today most modern alnico drivers are produced for use in guitar speakers. Don't know why there aren't more in home speakers but regardless there's something special going on with them. To my ears it's their gorgeous tone and the only descriptive word I can come up with is "sweet". I now have three pair of alnico speakers and I absolutely love them all. The little Coral Holey Baskets just kill anything I've heard from Fostex and the 8" and 12" Zeniths are in a class by themselves. If you're new to alnicos they are called that due to the material composition of their motors i.e. aluminum ( Al ), nickel ( Ni ) and cobalt (Co ).

wrwkbv2s0ujs8lkuikkn.jpg

The Diatone P610 copies from China are meant to be almost the equal of the little Coral Holey Baskets according to Glow In The Dark.

http://glowinthedarkaudio.com/diatoneclone.html

I've a pair of the 6" versions coming. Should be a nice improvement over the Polk TSI100 bookshelves I currently run in my bedroom system :)

US $99.88 | pair HIEND Melo David DIATONE P610 rebuild MK2 fullrange speakerPK lowther K.O Fostex (2018 eddition) free ship
https://s.click.aliexpress.com/e/cFgt3eu0
 
Damn, my system just surpassed the performance I was getting with the darTZeel NHB-108B + Aurum Cantus F620 combo. Far better transparency and depth, width is still a little less though still quite excellent. I'm beginning to realize that the only real limitations with these is in the front end. Can't wait to ditch the Chinese tubes and mod the amp :)

I have discovered though that the super tweeters are particularly valuable when used with the Zenith's. With them disabled high hats are completely absent from the mix so really the only problems with them are more sins of omission. Easily rectified using a super tweeter ;)

It's quite possible that my 10" Zenith 49CZ924 are simply less capable than the 12" 49CZ8** models though I guess. Still, the Zenith do not get congested in complex passages as the Dayton PS220-8 do so it's definitely a minor issue. Perfect in a 3 way design :D

For those who want woofer U frames without the fuss of diy there are these flat packs from Madisound.

https://www.madisoundspeakerstore.c...-kits/open-baffle-subwoofer-flat-pack-lxsub2/

If only I'd known of these when I did my design..... Would have been a so much simpler build..... Ah well, that's life right?
 
Assessing sound quality from a youtube video??? Seriously?? :eek:

Yes, there is quite a bit that can be discerned from a YouTube video, even if it doesn't tell the full story and it is simply a "cop out" to deny that some semblence of quality can be assessed from a well made video. :no:

I listen for frequency response, peaks, nulls, resonances, dynamic range, slam, etc. and all of these are portrayed from a good YouTube video.

Sure you loose some things like imaging, but a good speaker/system will be good in the noted parameters, and if it's not, it's not a good system even if it images, and does those other intangibles, perfectly.

Do you mean to tell us that if you go to the thread where people display their systems, you can't tell the "winners" from the "also rans?" If that is the case, you need better computer monitors or a better way of listening to these videos.
 
Last edited:
Well, I'm feeling a little stuck in my zenith adventures. I've had them in open back box's, flat panels, and over the weekend I built a version of the Wild Burro folding baffle speakers and to me they are no better than the panels. They sound clear and extremely detailed and on most music are better than average, and the imaging is excellent, but the highs are still too shrill and on certain albums they are flat out un-listenable. The highs are so sharp that I have to instantly turn them down and it blows out my ears so much that I have to stop listening. Messing around with the wings, didn't really get me anywhere new, it just seems to be a more refined way of adjusting them in place rather than moving them around the room. Any guidance would be appreciated.
 
Yes, there is quite a bit that can be discerned from a YouTube video, even if it doesn't tell the full story and it is simply a "cop out" to deny that some semblence of quality can be assessed from a well made video. :no:

I listen for frequency response, peaks, nulls, resonances, dynamic range, slam, etc. and all of these are portrayed from a good YouTube video.

Sure you loose some things like imaging, but a good speaker/system will be good in the noted parameters, and if it's not, it's not a good system even if it images, and does those other intangibles, perfectly.

Do you mean to tell us that if you go to the thread where people display their systems, you can't tell the "winners" from the "also rans?" If that is the case, you need better computer monitors or a better way of listening to these videos.

The big issue there is those things are primarily limited by the recording hardware. My current phone, a Chinese Xiaomi Pocofone, doesn't come even remotely close to the quality I could achieve with my previous Google Pixel. It was less than half the cost, will 4x the storage and a better performing camera though so I can't complain, although it enhances sibilance in recordings which kind of sucks. It really does limit the usefulness of a recording made with it though.

I think the telling line there is "a well made video" . You do need semi decent recording gear to achieve it. Mmmmm, wonder if I could jerry rig my Rode S1 mic up to my phone somehow.... I'd need phantom power to pull it off though.... That could prove interesting. Something to think about while I let everything burn in and wait for my NOS tubes :)

Well, I'm feeling a little stuck in my zenith adventures. I've had them in open back box's, flat panels, and over the weekend I built a version of the Wild Burro folding baffle speakers and to me they are no better than the panels. They sound clear and extremely detailed and on most music are better than average, and the imaging is excellent, but the highs are still too shrill and on certain albums they are flat out un-listenable. The highs are so sharp that I have to instantly turn them down and it blows out my ears so much that I have to stop listening. Messing around with the wings, didn't really get me anywhere new, it just seems to be a more refined way of adjusting them in place rather than moving them around the room. Any guidance would be appreciated.

I had that issue with mine. My wife wanted them gone pronto though I persisted in playing music through them for a good day and a half. They've now smoothed out and are far more pleasant. They're now exceptionally smooth and refined.

It wasn't just my tweeters needed burn in though rather the vintage drivers too, as well as the caps, inductors and internal speaker wiring. I used tinned copper wire and that does tend to be incredibly harsh prior to burn in.

Maybe your speakers just need burn in? Likewise the Zenith seem to really highlight differences between amps and sources more than anything I've run since the Dayton PS220-8's so they're very revealing. Perhaps try a different amp as well?

I need to add some sort of open back super tweeter to mine. These bullet tweeters reveal detail which simply doesn't exist with the Zenith's alone though they're still lacking compared to AMT or ribbon tweeters.
 
Last edited:
Well, I'm feeling a little stuck in my zenith adventures. I've had them in open back box's, flat panels, and over the weekend I built a version of the Wild Burro folding baffle speakers and to me they are no better than the panels. They sound clear and extremely detailed and on most music are better than average, and the imaging is excellent, but the highs are still too shrill and on certain albums they are flat out un-listenable. The highs are so sharp that I have to instantly turn them down and it blows out my ears so much that I have to stop listening. Messing around with the wings, didn't really get me anywhere new, it just seems to be a more refined way of adjusting them in place rather than moving them around the room. Any guidance would be appreciated.

What are your components in the signal chain? The Zeniths should sound buttery smooth with zero shrillness.
 
What are your components in the signal chain? The Zeniths should sound buttery smooth with zero shrillness.

Either my digital music player or my AR XB into a passive input selector into the FX 01 to the APPJ mini to the Zenith's, I have been running the powered subs off the out from the APPJ because they have a high signal input. I've tried rolling tubes in both the mini and FX and it doesn't seem to make much of a difference in taming the shrill.
 
I had that issue with mine. My wife wanted them gone pronto though I persisted in playing music through them for a good day and a half. They've now smoothed out and are far more pleasant. They're now exceptionally smooth and refined.

.

It's worth a shot, I'm running out of ideas at this point.
 
I'm thinking I might add these to the front of my speakers.... Get some more fine detail. 98db efficient. Really missing the delicacy of the top end in my Aurum Cantus F620 speakers.... It's the only thing these speakers don't excel at in direct comparison.

What do you think guys?

IMG_20190808_101015.jpg

It's worth a shot, I'm running out of ideas at this point.

I should mention that I also changed across to tube amplification....

IMG_20190806_191025.jpg
 
Last edited:
I'm thinking I might add these to the front of my speakers.... Get some more fine detail. 98db efficient. Really missing the delicacy of the top end in my Aurum Cantus F620 speakers.... It's the only thing these speakers don't excel at in direct comparison.

What do you think guys?

View attachment 1584247



I should mention that I also changed across to tube amplification....

View attachment 1584253
I haven't gotten to tweeters yet, I'm still trying to sort out the Zenith's, but from what I've been reading you might be better off with them rear facing. And I too got a little tube amp to go with the Zeniths, because all I had was high powered mosfet amps. I'm playing the Zeniths at a decent level at the moment to see if I just need to let them break in after sitting for who knows how long. It's not terrible, but not the most pleasant thing, but it's worth a shot. I put them back into the straight baffle because I think I like them best in that configuration.
 
I haven't gotten to tweeters yet, I'm still trying to sort out the Zenith's, but from what I've been reading you might be better off with them rear facing. And I too got a little tube amp to go with the Zeniths, because all I had was high powered mosfet amps. I'm playing the Zeniths at a decent level at the moment to see if I just need to let them break in after sitting for who knows how long. It's not terrible, but not the most pleasant thing, but it's worth a shot. I put them back into the straight baffle because I think I like them best in that configuration.

Ah, you're not dealing with just the Zenith's them. Most tubes need a good 30 hours for burn in.... Ditto the amp itself. Transformers take somewhat longer
 
Ah, you're not dealing with just the Zenith's them. Most tubes need a good 30 hours for burn in.... Ditto the amp itself. Transformers take somewhat longer
That's a good point that I hadn't really considered, I haven't had a new amp in so long everything I've got in the last 10 years has been used, I plumb forgot about that.
 
Back
Top Bottom