• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

I just can't get over how good these sound. Depth I never knew could exist. Less pin point accuracy than I'm accustomed too though far more natural. I've never heard anything like this before. Just wow.
Glad you're liking them. I haven't had that breakthrough moment yet, but I can see the potential of it getting there. You went about this in a very structured way, where as I've just been reading a lot and trying different combinations in a way similar to throwing mud on the wall and seeing what sticks.

I still need to tame the highs a bit as they are coming in too sharp, but I'm getting close.
 
Glad you're liking them. I haven't had that breakthrough moment yet, but I can see the potential of it getting there. You went about this in a very structured way, where as I've just been reading a lot and trying different combinations in a way similar to throwing mud on the wall and seeing what sticks.

I still need to tame the highs a bit as they are coming in too sharp, but I'm getting close.

I just read this thread end to end and Googled everything I could looking for how others have done it and which drivers gave good results. I only found one other had done open back cabinets though the improvement in bass got my interest, as did the potential for child proofing.

I had actually purchased Dayton PS220-8 and Eminence Alpha-15A drivers for the project before coming across how good the Zenith are full range and how good the Magnavox 15" drivers were for bass. I'll need to sell those now. No point hanging on to them ;)

On the upside, this show that open back cabinets are a viable alternative for those where open baffles aren't practical for them.

You'll notice my darTZeel NHB-108B copy is no longer in this photo. It'll now be sold, along with my Aurum Cantus F620 speakers ;)

IMG_20190806_004032.jpg
 
I just read this thread end to end and Googled everything I could looking for how others have done it and which drivers gave good results. I only found one other had done open back cabinets though the improvement in bass got my interest, as did the potential for child proofing.

I had actually purchased Dayton PS220-8 and Eminence Alpha-15A drivers for the project before coming across how good the Zenith are full range and how good the Magnavox 15" drivers were for bass. I'll need to sell those now. No point hanging on to them ;)

On the upside, this show that open back cabinets are a viable alternative for those where open baffles aren't practical for them.

You'll notice my darTZeel NHB-108B copy is no longer in this photo. It'll now be sold, along with my Aurum Cantus F620 speakers ;)

View attachment 1582208

Have you tried moving the left speaker out into the hall just to see how it sounds? I move my OB's around so much I may add castors.
 
Have you tried moving the left speaker out into the hall just to see how it sounds? I move my OB's around so much I may add castors.

Haha, yeah that won't be happening for even 5 minutes. My wife's not quite that understanding. She thinks they're too big as is, and she's right. They're huge.
 
Last edited:
I've NOS RCA tubes on the way for those. A full complement ;)



Eventually, once everything is dialled in nicely. I'm a fussy bugger ;)

Closed back Ethyl Mermans. Listen how revealing and realistic. This is just a regular CD played on an Oppo 95 through a Yamaha RX-Z9 receiver. This is in "CD Direct" mode, room warts and all. There is no eq, digital processing, or sub being used and I use no special wires, etc.

Like being there. Enjoy.



ScreenHunter_211_Jul_30_11_40.jpg
 
I keep getting PM's from folks asking about the Zenith 49CZ8** which are now going for several hundred dollars on ebay. I feel bad and partly responsible as the praise I've heaped on them here and on AC has probably escalated their price. Just a couple of years ago you couldn't give them away.
 
832A is also equivalent to FU32. I've a pair of those coming.

The frustrating thing is that these speakers + darTZeel NHB-108B copy is in the OMFG these things sound amazing category however the amp has noticeable hum with these speakers so it has to be retired. I've a feeling that modding this little tube amp should equal or surpass it though.

Overall this is currently a step back from what I was getting with the darTZeel + Aurum Cantus F620 speakers though primarily due to amplification. I will get this right ;)

I keep getting PM's from folks asking about the Zenith 49CZ8** which are now going for several hundred dollars on ebay. I feel bad and partly responsible as the praise I've heaped on them here and on AC has probably escalated their price. Just a couple of years ago you couldn't give them away.

Seems more Zeniths are great than the 49CZ8**, my 10" ones are 49CZ924 and really do sound fantastic. They appear to be improving with use too so possibly these old drivers loosening up, or maybe the tweeter, caps and wiring burning in or just a combination of these. Course the little Chinese amp and tubes has only a half day on it so that's burning in too.

Thing is though, if they made a version of the Dayton PS220-8 in 10 or 12" that wasn't point source I could happily go to one of those as I love the sound signature of that driver. I've never heard a more revealing driver though hate how narrow the sweet spot is with them. The only thing stops them being an amazing driver really. For near field listening however PS220-8 and PS180-8 are incredibly hard to beat though.
 
Last edited:
832A is also equivalent to FU32. I've a pair of those coming.

The frustrating thing is that these speakers + darTZeel NHB-108B copy is in the OMFG these things sound amazing category however the amp has noticeable hum with these speakers so it has to be retired. I've a feeling that modding this little tube amp should equal or surpass it though.

Overall this is currently a step back from what I was getting with the darTZeel + Aurum Cantus F620 speakers though primarily due to amplification. I will get this right ;)



Seems more Zeniths are great than the 49CZ8**, my 10" ones are 49CZ924 and really do sound fantastic. They appear to be improving with use too so possibly these old drivers loosening up, or maybe the tweeter, caps and wiring burning in or just a combination of these. Course the little Chinese amp and tubes has only a half day on it so that's burning in too.

Thing is though, if they made a version of the Dayton PS220-8 in 10 or 12" that wasn't point source I could happily go to one of those as I love the sound signature of that driver. I've never heard a more revealing driver though hate how narrow the sweet spot is with them. The only thing stops them being an amazing driver really. For near field listening however PS220-8 and PS180-8 are incredibly hard to beat though.
From what I hear, you can always stay the vintage route, or drop the money on 12" or 15" Audio Nirvana drivers. I was looking at the 8" Neodymium range, but man, expensive without getting a chance to hear them first. The 12" ferrite versions aren't nearly as bad for price though. I mean, I guess the neodymium could sound pretty close to the Alnico or ferrite versions. I think Poultrygeist has played around with a pair?
 
From what I hear, you can always stay the vintage route, or drop the money on 12" or 15" Audio Nirvana drivers. I was looking at the 8" Neodymium range, but man, expensive without getting a chance to hear them first. The 12" ferrite versions aren't nearly as bad for price though. I mean, I guess the neodymium could sound pretty close to the Alnico or ferrite versions. I think Poultrygeist has played around with a pair?

From all counts the new Chinese copies of the Diatone P610 are also excellent and come in 12", both ferrite and Alnico versions. The killer is postage costs.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/323743959212
 
Last edited:
Back
Top Bottom