• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

Some baffle-less speakers work quite well.

97217f07b7d9983bae83ebc22d464e30.jpg
 
The price of the F15 drivers on AliExpress isn't too bad. Too late for me to put them on my open back speakers though. No space for them on there.... Hmmm, how much bass do they have. Maybe they could be run full range alongside the Zeniths....
 
If the F15's are that good I'm puzzled that opo1 sold his so soon?
Might have been looking for a different sound. Seems like a lot of people are getting interested lately though. I ordered a pair, mjw21a can't be far behind! and DIYAudio has been looking at them in a thread. I'm guessing the Decware Zenfest is going to give them a lot of exposure as well.
 
Nah, I'm limited to 10" drivers and I'm finding sound is so good with what I have that I'm questioning my desire to try other 10" drivers. What I really need to sort out is deep bass. I'll be rewiring my speakers and bi-amping tomorrow. The Plat Audio planars will be replaced with Aurum Cantus G3Si ribbons too. ;)

I find during the daylight hours I'm somewhat underwhelmed as surrounding ambient noise affects enjoyment. At night time it's nothing short of spectacular. Bass is insufficient though
 
What type magnet does the F15 use?
Ferrite. I'd be REALLY surprised if they were making 15" FR with Alnico at that price. I think even the Crystal 10's are ferrite. No mention of neodymium.

Edit: maybe I read that on the Decware forums or DIYAudio... it doesn't say on the Lii website.
Edit #2: Lii Audio says on their FB group the Fast 8 are ferrite. Make of it what you will.
 
Last edited:
Does he no longer hang out on AK? :dunno:

Yes I have. These drivers are what Steve said they are. :thumbsup:

I've had the Zenith CZ852's,903's in OB. They are getting harder to find and the cost of a pair is around 200.00 + ship on the bay when they come up. The F-15 " to me" is much better compared to the Zeniths. At 399.00 I'll say these are a bargain.
View attachment 1616165 View attachment 1616166

He said he sold them because they were too big for his room; there is speculation that he is going to try the 10s. :) :dunno:
 
Ok, removed l pads and installed the Aurum Cantus G3Si ribbon tweeters, wired the 15" woofer to separate terminals and bi-amped.

OMG what a massive improvement! More natural extended highs, greater transparency and detail, richer sounding with deeper bass. Basically better all round! :)

IMG_20191007_173722.jpg

I might just be done now. ;)
 
I can't get over how much things have improved. I can actually feel the bass as well which is nice. I think I'm done. Might lower the bass level a bit maybe.
 
No, I don't believe I created a separate thread... Technically these are open back rather than open baffle though. I went this direction as it allows me to keep children and pets out of the speakers.

They're still evolving. I need to drop the crossover point for the tweeters.... I may replace the 10" Zenith 49CZ924 drivers with 10" Diatone P610 clones yet though I'm going to enjoy them as they are for a while first..... Well, apart from adding a 1uf Cornell Dubilier 940c to the tweeter caps to take it to 6.47uf

IMG_20190802_173624.jpg

IMG_20190812_174854_1.jpg

IMG_20190806_145646.jpg

IMG_20190921_231705.jpg
 
Glow-in-the-dark has a bit of a write up on the P610's

Yes, I've read that. It was what prompted me to try the cheap little 6" Diatone P610 clone in my bedroom system. Sounds fantastic. A really special driver with incredible bass for its size, lovely midrange and excellent detail. It has a real "you are there" presence. The only question is how good the 10" version is in open back cabinets..... I think they've the potential to better the 10" Zenith 49CZ924 drivers.
 
Back
Top Bottom