• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

Seriously guys, I'm not going to argue this. The W-15 are on order, and I'll report my findings one way or another once I've tried them out. I don't see the issue here. If we're going to argue about it then I'll simply discuss on another forum.

Going to stick with the Zenith for a bit and drop the crossover point to the recommended 2300Hz. Should do the trick with that. :)
 
No reviews as these are not even on their site just yet. I'm tossing up adding a pair of FAST-10 to the order. Should be better than the Zeniths. ;)

Are your Zeniths crossed over? If running a passive sound robbing X-over on my Zeniths I would not be much of a fan. The Zeniths sound their best when run unencumbered.
 
Are your Zeniths crossed over? If running a passive sound robbing X-over on my Zeniths I would not be much of a fan. The Zeniths sound their best when run unencumbered.

No, it's running full range. Lovely sound though the magic really kicked in with a quality tweeter, bi-amping added body and richness that I never even knew was missing.

I've realised that the FAST-10 doesn't even need a tweeter, or even a bass driver. Since mine is already built and sounding all kinds of incredible I should just focus on the few very small weaknesses.

I find a little softness in the lower part of voices. Dropping the tweeter crossover point should sort that.

I'm not missing deep bass though I know it can go deeper. Especially for TV and movies. These things are so close to perfection. It will be interesting to see if the goal posts shift. That's always been the thing with me.
 
Seriously guys, I'm not going to argue this. The W-15 are on order, and I'll report my findings one way or another once I've tried them out. I don't see the issue here. If we're going to argue about it then I'll simply discuss on another forum.

Going to stick with the Zenith for a bit and drop the crossover point to the recommended 2300Hz. Should do the trick with that. :)

Please don’t get me wrong, my comment on fightin’’ words was 100% in jest, meaning tongue and cheek. I for one am extremely eager to hear about your experience and findings regardless of the end result, I’m here to enjoy “the journey.”
:beerchug:
 
OB woofers ( high Qts > 1.0 ) have looser cones/suspentions which allow them to move more air in open space. Tighter cone/suspension woofers ( low Qts < .5 ) work fine in enclosed boxes but they can't move as much air in open space.
 
Last edited:
OB woofers ( high Qts > 1.0 ) have looser cones/suspentions which allow them to move more air in open space. Tighter cone/suspensions woofers ( low Qts < .5 ) work fine in enclosed boxes but they can't move as much air in open space.

You've just answered the following ;)

So? How does that negate the laws of physics? When drivers are measured for frequency response specs they're mounted on an infinite baffle or as near infinite as practicable - they're not mounted on two foot wide baffles.
 
Ok, I've a pair of the 10" Melo David P1010 (Diatone P610 inspired) full range drivers on order now too. Keen to see how they compare to the Zeniths. If I like them better they stay in there which will make for all Chinese drivers in my speakers.....

I count the Skar Audio as Chinese as they're just a blatant rebrand of a Chinese driver. There's about 6 different brands all pushing exactly the same set of bullet tweeters.
 
I would go with these dimensions if you plan to add helper woofers.

http://www.quarter-wave.com/Project09/Project09.html

If not and you have the space consider these. Widen the middle baffle to accommodate the Zeniths but shorten the wings to get the same over all dimensions.

http://www.wildburroaudio.com/projects.php

I'd like to run the Zeniths alone.

Smaller would be better, but if bigger sounds better then that's what I'll try.

The measurements given on glow in the dark are 16x36 and 12x36 for the 2 wings.

Wildburro shows 9x48, 10x48 and 18x48

You say to widen the middle one and shorten the wings. How many inches, or is it not critical?

How about speaker placement?

Glow in the dark has the bottom of the speaker about 21 inches from the floor. Wildburro looks to be in the middle. This seems important too.

Final question. Is 3/4 thick preffered, or is 1 inch ok?

Thanks!

I recently stumbled into open bafflle speakers after looking to see if the speakers in my new Zenith console were any good.
 
I'd like to run the Zeniths alone.

Smaller would be better, but if bigger sounds better then that's what I'll try.

The measurements given on glow in the dark are 16x36 and 12x36 for the 2 wings.

Wildburro shows 9x48, 10x48 and 18x48

You say to widen the middle one and shorten the wings. How many inches, or is it not critical?

How about speaker placement?

Glow in the dark has the bottom of the speaker about 21 inches from the floor. Wildburro looks to be in the middle. This seems important too.

Final question. Is 3/4 thick preffered, or is 1 inch ok?

Thanks!

I recently stumbled into open bafflle speakers after looking to see if the speakers in my new Zenith console were any good.
My internet at home is off line due to lightning damage. When things normalize I'll respond.
 
I'd like to run the Zeniths alone.

Smaller would be better, but if bigger sounds better then that's what I'll try.

The measurements given on glow in the dark are 16x36 and 12x36 for the 2 wings.

Wildburro shows 9x48, 10x48 and 18x48

You say to widen the middle one and shorten the wings. How many inches, or is it not critical?

How about speaker placement?

Glow in the dark has the bottom of the speaker about 21 inches from the floor. Wildburro looks to be in the middle. This seems important too.

Final question. Is 3/4 thick preffered, or is 1 inch ok?

Thanks!

I recently stumbled into open bafflle speakers after looking to see if the speakers in my new Zenith console were any good.

Given that you have the space and can pull them out into the room 3+ feet from all walls I would go with the Zeniths in the Wild Burro OB design using their dimensions and driver location. The middle baffle should be wide enough for the Zeniths and you can shorten the wings to get the correct over all same width. 3/4" thick plywood as 1 inch will make them too heavy to move around.

hero_room.jpg
 
I have a friend with it wood shop and lots of scrap plywood so I'm definitely going to try the bigger size even though I I really don't have a lot of space. The only expense will be the hinges.

The Zenith is about 11 or 12 inches so the center baffle needs to be much wider. Not sure how important the different lengths of the wild burro affects the sound.

Is the goal to keep the overall size at 37 total inches? If different lengths are important, then go 8x48 14 x 48 and 15x48 maybe?

Maybe I'm overthinking this and should just cut some wood and see how it sounds, but I figured I'd ask the people that have already tried.
 
As I recall the Zenith cut out is right at 11 inches but the baffle wouldn't have to be a great deal wider maybe an 1 1/4 inches from the speaker edge on each side. Different wing lengths aren't terribly critical as long as you keep the same WBAL overall dimensions. You'll get the most bass when the wings are opened rather than closed. FWIW I found some really inexpensive piano hinges at Big Lots.

PB130008.jpg
 
I tried the Tang Band W8-1808's in the folding wing baffles and while the highs and mids were nice, these low Qts full range drivers had no bottom end.

P2270031.jpg
 
Last edited:
We have menards and home depot around here, one of them should have the hinges.

I have next week off, cant wait try this out.

Thanks for the help!
 
Back
Top Bottom