Hello all!
200 pages. I have read up through 114, and each page whets my appetite for OB.
Current system:
Some sort of Yamaha receiver with a bunch of watts.
Cell phone playing Spotify as source.
Bose 901/series1 with original required eq.
Loud....very loud. But totally unsatisfying. I do kind of like the over all sound of the speakers, but they really need a lot of juice to sing. I'm too old for that these days.
Music tastes are all over the map. Everything from Duke, Dizz, Miles, and Bird, to The New Mastersounds, The Staves, Lake Street Dive, Nathaniel Ratliff & The Night Sweats.
I listen to a LOT of music.
A few years ago I got my hands on some GRS BOFU clones and built .... I think(?) ....a set of Frugalhorns.
The project turned out nice, and I enjoyed them after the broke in and started sounding more "warm."
Now.....now after reading 114 pages of this thread, I'm imagining open baffle in my 14x24 room. Wood floors, brick walls, and 10' celings.
I plan to build some Hestia Hybrids ( https://www.audiocircle.com/index.php?topic=169640.0)
Using the second, unused set of BOFU clones and some Vifa TC9's.
But now.....now I am enthralled with the thought of finding some Zenith 49cz's and having a go at an H baffle with them.
I have, in my wood shop , a pair of bookshelf speakers and a little Lepai t-class amp. I was shocked at how nice this system plays.
I wonder if I could use a small amp like this to drive the 12" Zenith drivers adequately?
Spotify as source, into the amp(s) into the OB H baffles?
As you can see from the above screed, I'm happless when it comes to any theory, electronic knowledge, or design. Utterly happless.
However, I love music, and am a woodworker by trade. So I am hopeful to be able to put something together that will cause the sale of the 901's and Yamaha, whatever it is, and settle down for hours of Open Baffle yummyness.
Anyway, that's my self intro and outline of my first proposed steps into the dark side of OB.
Thanks for having me, I'll try not to be too much of an ignorant pest.

UPDATE:
Zenith 49cz1059's are on their way to me. Yay!
Now is baffle design, and research on building a sub for assistance.
I also have a pair of "Best" 12" woofers coming to me, that I bought knowing nothing about them (Thanks to the site, I now know approx what they are.)
My thought was to use them in an H baffle like Polterygeist uses, and build Zenith baffles like his also.
Edit to say:
Amplification is now also on my radar. Since I look to assist the bass, I suspect I'll be diving into bi-amplification.
Since I am already going to be in trouble for the driver's, I'm looking hard at tube amp pulls from consoles, and T-D class amps....does this sound right?
I'll need to read up on how to actually wire everything together, but I have read enough to know that the Zenith's run full range right from(?),
And...
The bass assist drivers each get their own low watt amp also(?)
Correct?
Two options for powering and filtering the bass woofers with the full range drivers running full range and I use both.
1- A class D amp driving two Eminence Alphas ( they are very efficient at around 96 dbs ) with an active crossover between a preamp and the class D amp.
2- A 100 watt Yung plate amp driving the two Alphas. The plate amp with it's crossover, filters the HF from the Alphas.
1- CDP, DAC, TT etc. connected to preamp which has two pair of outputs. One pair of outputs is connected to the tube amp powering the full range speakers while the other goes to an active crossover which feeds and filters the class D amp powering the woofers.
2- CDP, DAC,TT etc. connected to a preamp with a single pair of outputs, I use a pair of Y cables from the preamp and connect to both the tube amp powered full range speakers and to a plate amp which powers and filters the woofers.
FWIW I can't find a picture or any info on the Zenith 1059 or the Best (?) woofers
Hello, I have been given several sets of 12 inch Heppner speakers from organs. One of the sets are smooth and the other one has ridges. Anybody tried these in a open baffle setup? They are 16 ohm so I'm going to use 2 per speaker to make them more compatible with my amp. Haven't figured out what to use for hf yet yet, but looking at something like a super tweeter.
Hello, I have been given several sets of 12 inch Heppner speakers from organs. One of the sets are smooth and the other one has ridges. Anybody tried these in a open baffle setup? They are 16 ohm so I'm going to use 2 per speaker to make them more compatible with my amp. Haven't figured out what to use for hf yet yet, but looking at something like a super tweeter.
Poultrygeist, yes they do have alinco motors. I have 1 set of speakers built and was going to build a set from 12 inch Rola's and see which ones I like better. I have been learning about crossovers but honestly I haven't a clue yet.
I can't find anything on them either.
The cz's I am getting from a member here. Typo on model #?
Supposed to me identical to 800 series cz's
The BEST drivers are a mystery. I got them for next to nothing, and figured they would be fun to play with worst case, and maybe useable as temporary bass assist, until suitable 15" - ers could be snuggled in....er....procured once the wife approved of another purchase.
I'll be exploring your amp-map(s) for bi-amping. Ultimately, I suspect an active x-over will be needed. Initially, I had hoped to do this with an absolute minimum of components, that was what sort of made the Zenith purchase so attractive.
That said, I am at peace with having to bring a couple of new toys to the party, but am the type of person who needs to be 100% sure I know how everything will be put together. Thank you for helping PG. I was hoping you would chime in.
GITD has a page discussing the 1045 here.....
http://glowinthedarkaudio.com/zenith-49-1045.html.
Still nothing on the BEST, other than some discussion to a thread I started on the general board.
While I was hoping for the sexier basket of the 800 series cz's, I'm kind of excited to hear what the 1045's have to offer. With the whizzer cone, I should maybe be able to just have bass assist, and that's it.....maybe.....not holding my breath.
PG, if my Yamaha AV receiver has a sub - out, could I use this as something of a crossover just for the time being?
I have the plan stuck in my head that the OBs will be a separate, second system. Initially starting as just the Zenith's in open baffle running full range. Chances are good I'll want the bass assist, so will dive down that rabbit hole once I get there.
I'm leaning toward a separate active x-over, like you have mentioned here previously. Berrhingger(?) Something or other? Low cost, and had been treating you right, If I recall correctly.
Anyhow, I'm quite sure there will be several more questions as I progress.
Thanks all!
Your 1045 do not have wizzer cones as those mentioned at GITDA.............................I suspect the lack of CZ on his would be why the wizzer is there. The drivers you are getting are IDENTICAL to 802 / 852 with the alnico motors etc.... 1 word of caution do not over tighten the drivers when mounting to the baffle. I have had a few pairs of these and on one occasion I learned the hard way you will warp the frame and could cause loss of connection on the Voice Coil Just snug is more than enough they wont vibrate.